mirror of
https://github.com/1technophile/OpenMQTTGateway.git
synced 2026-03-03 05:54:23 +01:00
33 lines
1.4 KiB
Markdown
33 lines
1.4 KiB
Markdown
# IR gateway
|
|
## Compatible parts
|
|
|Module|Purpose|Where to Buy|
|
|
|-|-|-|
|
|
|IR diode|Emitting|[compatible parts list](https://compatible.openmqttgateway.com/index.php/parts)|
|
|
|IR receiver|Receiving|[compatible parts list](https://compatible.openmqttgateway.com/index.php/parts)|
|
|
|transistor 2N2222|Amplify uC signal for the IR diode|-|
|
|
|330 ohms resistor|-|[compatible parts list](https://compatible.openmqttgateway.com/index.php/parts)|
|
|
|220 ohms resistor|limit current to LED|[compatible parts list](https://compatible.openmqttgateway.com/index.php/parts)|
|
|
|
|
The IR setup can work with bc547 and a 4x3 LED-Matrix.
|
|
|
|
## Pinout
|
|
|Board| Receiver Pin| Emitter Pin|
|
|
|-|:-:|:-:|
|
|
|Arduino UNO|D2|D9|
|
|
|ESP8266|D4|D0|
|
|
|ESP32|27/**26**|14|
|
|
|
|
Connect the Emitter and Receiver to a 5V supply source, and the ground of your supply source to the ground of your board.
|
|
|
|
## Arduino Hardware setup
|
|
|
|
|
|
## ESP8266 Hardware setup
|
|
|
|
|
|
## ESP32 Hardware setup
|
|
|
|
|
|
## Credits
|
|
This gateway exists thanks to the work done on [IRRemote](https://github.com/z3t0/Arduino-IRremote) and [IRremoteESP8266](https://github.com/crankyoldgit/IRremoteESP8266) libraries. Thanks for the works of contributors and especially [@crankyoldgit](https://github.com/crankyoldgit) for its active contributions.
|