Mirrors/MySensors
2
0
Fork 0
mirror of https://github.com/mysensors/MySensors.git synced 2026-02-19 17:11:28 +01:00
Code Issues Packages Projects Releases Wiki Activity
Files
development
MySensors/MyConfig.h
Olivier d6525d4c2e MySensors Diagnostics (#1333) 
* MySensors Diagnostics

* Fix Cppcheck issues

* Fix formatting in PrintHex8 function
2026-02-07 15:11:27 +01:00

2814 lines
81 KiB
C
Executable File
Raw Permalink Blame History

/*
* The MySensors Arduino library handles the wireless radio link and protocol
* between your home built sensors/actuators and HA controller of choice.
* The sensors forms a self healing radio network with optional repeaters. Each
* repeater and gateway builds a routing tables in RAM or EEPROM which keeps track of the
* network topology allowing messages to be routed to nodes.
*
* Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
* Copyright (C) 2013-2026 Sensnology AB
* Full contributor list: https://github.com/mysensors/MySensors/graphs/contributors
*
* Documentation: http://www.mysensors.org
* Support Forum: http://forum.mysensors.org
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*/
/**
* @file MyConfig.h
* @ingroup MyConfigGrp
* @brief MySensors specific configuration flags.
* @{
* Set these in your sketch before including MySensors.h to customize the library to your needs.
* If the sketch does not define these flags, they will get default values where applicable.
*/
#ifndef MyConfig_h
#define MyConfig_h
/**
* @defgroup SerialDebugGrpPub Serial and debugging
* @ingroup MyConfigGrp
* @brief These options control serial and debugging features and functionalities in the library.
* @{
*/
/**
* @def MY_DEBUG
* @brief Define MY_DEBUG to show debug prints.
*
* This option will add a lot to the size of the final sketch but is helpful to see what is actually
* is happening during development.
*
* @note Values in parenthesis indicate default values which will be used if you have not defined
* the flag in your sketch.
*/
//#define MY_DEBUG
/**
* @def MY_DEBUGDEVICE
* @brief Define MY_DEBUGDEVICE to redirect debug prints.
*
* If defined, MY_DEBUGDEVICE replaces MY_SERIALDEVICE for the purpose
* of printing debug messages. This only applies to debugging.
*
* The intent is to provide the ability to send debugging messages
* out a different serial port than what is being used for
* communication between nodes or from gateway to controller when
* this communication uses a serial interface. This assumes that
* the MY_DEBUGDEVICE serial interface already exists. It can be a
* hardware serial device or a software serial device.
*/
//#define MY_DEBUGDEVICE
/**
* @def MY_DEBUG_OTA
* @brief Define MY_DEBUG_OTA to (nodeID) to redirect debug prints to given node ID
*
* Example: @code #define MY_DEBUG_OTA (0) @endcode will redirect debug prints to node ID 0.
*
* With this option debugging messages over serial are disabled. It's not possible to send debug
* messages generated by the radio. All other debug messages redirected to the given Node ID.
* The debug messages are sent without signing.
*
* This function allocates some additional memory for radio packet preparation and buffering.
* Debug messages are sent to child ID 255 (NODE_SENSOR_ID) as I_LOG_MESSAGE type.
*
* You have to enable the @ref MY_OTA_LOG_RECEIVER_FEATURE on the target node.
* Look into the LogOTAGateway and LogOTANode examples.
*
* The output buffer can be configured via @ref MY_SERIAL_OUTPUT_SIZE
* Transport related debugging is disabled when MY_DEBUG_OTA is enabled.
*
*/
//#define MY_DEBUG_OTA (0)
/**
* @def MY_DEBUG_OTA_DISABLE_ECHO
* @brief Define MY_DEBUG_OTA_DISABLE_ECHO to send messages without requesting the
* destination to echo the message.
*
* This option reduces the latency added by OTA debug messages by sending packages
* only once. You can loose debug messages.
*
*/
//#define MY_DEBUG_OTA_DISABLE_ECHO
#if defined(MY_DEBUG_OTA_DISABLE_ACK) && !defined(DOXYGEN)
#warning MY_DEBUG_OTA_DISABLE_ACK is deprecated, please use MY_DEBUG_OTA_DISABLE_ECHO instead
#define MY_DEBUG_OTA_DISABLE_ECHO
#endif
/**
* @def MY_OTA_LOG_RECEIVER_FEATURE
* @brief Define this to enable printing of OTA logs.
*
* This option requires additional memory for buffering. The buffer size can be configured
* via MY_SERIAL_OUTPUT_SIZE.
*/
//#define MY_OTA_LOG_RECEIVER_FEATURE
/**
* @def MY_OTA_LOG_SENDER_FEATURE
* @brief Define this to enable printing of OTA logs.
*
* This option requires additional memory for buffering. The buffer size can be configured
* via MY_SERIAL_OUTPUT_SIZE.
*/
//#define MY_OTA_LOG_SENDER_FEATURE
/**
* @def MY_SPECIAL_DEBUG
* @brief Define MY_SPECIAL_DEBUG to enable support for I_DEBUG messages.
*
* I_DEBUG messages are sent from the controller to the node, which responds with the requested
* data. The request can be one of the following:
* - 'R': routing info (only repeaters): received msg XXYY (as stream), where XX is the node and YY
* the routing node
* - 'V': CPU voltage
* - 'F': CPU frequency
* - 'M': free memory
* - 'E': clear MySensors EEPROM area and reboot (i.e. "factory" reset)
*/
//#define MY_SPECIAL_DEBUG
/**
* @def MY_DIAGNOSTICS
* @brief Define MY_DIAGNOSTICS to show a diagnostics serial user interface
*
*/
//#define MY_DIAGNOSTICS
/**
* @def MY_DIAGNOSTICS_CRYPTO
* @brief Define MY_DIAGNOSTICS_CRYPTO to include crypto testing functions.
*
* This feature is disabled on AVR architectures due to limited flash/RAM space but can be enabled if needed.
*
*/
//#define MY_DIAGNOSTICS
/**
* @def MY_DISABLED_SERIAL
* @brief Define MY_DISABLED_SERIAL if you want to use the UART TX/RX pins as normal I/O pins.
*
* @note When defined, if you want to use the pins as a UART, you need to handle initialization and
* configuration yourself.
*/
//#define MY_DISABLED_SERIAL
/**
* @def MY_SPLASH_SCREEN_DISABLED
* @ingroup memorysavings
* @brief If defined, will disable the MySensors splash screen.
*
* @note This saves 120 bytes of flash.
*/
//#define MY_SPLASH_SCREEN_DISABLED
/**
* @def MY_BAUD_RATE
* @brief Serial output baud rate (debug prints and serial gateway speed).
*
* The baud rate configured here must match the baud rate at the "other" end.
*
* @warning Depending on your target device and clock speed, certain baud rates might not work well.
*/
#ifndef MY_BAUD_RATE
#define MY_BAUD_RATE (115200ul)
#endif
/**
* @def MY_SERIAL_OUTPUT_SIZE
* @brief Maximum characters for serial output.
*
* If you are running extremely low on memory, reducing this size might just save your day.
*/
#ifndef MY_SERIAL_OUTPUT_SIZE
#define MY_SERIAL_OUTPUT_SIZE (120u)
#endif
/** @}*/ // End of SerialDebugGrpPub group
/**
* @def MY_DEBUG_VERBOSE_OTA_UPDATE
* @brief Define this for verbose debug prints related to FOTA updates.
*/
//#define MY_DEBUG_VERBOSE_OTA_UPDATE
/**
* @def MY_OTA_USE_I2C_EEPROM
* @brief Define this if you want I2C EEPROM instead
* of a SPI flash. Used EEPROM needs to be large enough, an 24(L)C256 will do as minimum.
* HW I2C assumed. This will exclude the SPI flash code.
* Note that you also need an updated DualOptiboot supporting I2C EEPROM!
*/
//#define MY_OTA_USE_I2C_EEPROM
#ifdef MY_OTA_USE_I2C_EEPROM
// I2C address of EEPROM. Wire will shift this left, i.e. 0x50->0xA0
#ifndef MY_OTA_I2C_ADDR
#define MY_OTA_I2C_ADDR 0x50
#endif
#endif
/**
* @defgroup TransportSettingGrpPub Transport selection
* @ingroup MyConfigGrp
* @brief These options control what transport type to use and various transport specific customisations.
* @{
*/
/**
* @defgroup PJONSettingGrpPub PJON
* @ingroup RadioSettingGrpPub
* @brief These options are specific to the PJON wired transport.
* @{
*/
/**
* @def MY_PJON
* @brief Define this to use the PJON wired transport for sensor network communication.
*/
//#define MY_PJON
/**
* @def MY_PJON_PIN
* @brief Define this to change pin for PJON communication
*/
#ifndef MY_PJON_PIN
#define MY_PJON_PIN (12u)
#endif
/**
* @def MY_DEBUG_VERBOSE_PJON
* @brief Define this for verbose debug prints related to the %PJON driver.
*/
//#define MY_DEBUG_VERBOSE_PJON
/**
* @def MY_PJON_MAX_RETRIES
* @brief Define this to change max send retry in PJON communication
*/
#ifndef MY_PJON_MAX_RETRIES
#define MY_PJON_MAX_RETRIES (5u)
#endif
#ifdef MY_PJON
#ifndef PJON_STRATEGY_ALL
#define PJON_STRATEGY_BITBANG
#endif
#define PJON_NOT_ASSIGNED (253u)
#define PJON_BROADCAST (255u)
#define SWBB_MAX_ATTEMPTS (50u)
#define PJON_INCLUDE_SWBB
#endif
/** @}*/ // End of PJONSettingGrpPub group
/**
* @defgroup RS485SettingGrpPub RS485
* @ingroup TransportSettingGrpPub
* @brief These options are specific to the RS485 wired transport.
* @{
*/
/**
* @def MY_RS485
* @brief Define this to use the RS485 wired transport for sensor network communication.
*/
//#define MY_RS485
/**
* @def MY_RS485_BAUD_RATE
* @brief The RS485 BAUD rate.
*/
#ifndef MY_RS485_BAUD_RATE
#define MY_RS485_BAUD_RATE (9600)
#endif
/**
* @def MY_RS485_MAX_MESSAGE_LENGTH
* @brief The maximum message length used for RS485.
*/
#ifndef MY_RS485_MAX_MESSAGE_LENGTH
#define MY_RS485_MAX_MESSAGE_LENGTH (40)
#endif
/**
* @def MY_RS485_SOH_COUNT
* @brief Use this in case of collisions on the bus. 3 might be a good setting.
*/
#ifndef MY_RS485_SOH_COUNT
#define MY_RS485_SOH_COUNT (1)
#endif
/**
* @def MY_RS485_DE_PIN
* @brief RS485 driver enable pin.
*/
//#define MY_RS485_DE_PIN (2)
/**
* @def MY_RS485_DE_INVERSE
* @brief Define this if RS485 driver enable pin polarity is inverted (low-active).
*/
//#define MY_RS485_DE_INVERSE
/**
* @def MY_RS485_HWSERIAL
* @brief Define this if RS485 is connected to a hardware serial port.
*
* Example: @code #define MY_RS485_HWSERIAL Serial1 @endcode
*/
//#define MY_RS485_HWSERIAL (Serial1)
/** @}*/ // End of RS485SettingGrpPub group
/**
* @defgroup RF24SettingGrpPub RF24
* @ingroup TransportSettingGrpPub
* @brief These options are specific to the RF24 family of wireless transport modules.
*
* The following chips are supported by this driver:
* | Vendor | Chip
* |--------------------------|----------
* | Nordic Semiconductor | nRF24L01
* | | nRF24L01+
* | Beken Corporation | BK2401
* | | BK2421
* | | BK2491
* | Hope Microelectronics | RFM70
* | | RFM73
* | Panchip Microelectronics | XN297
* | Silicon Labs(?) | SI24R1
* @{
*/
// legacy - remove for 3.0.0
/**
* @def MY_RADIO_NRF24
* @brief Define this to use a RF24-based radio transport for sensor network communication.
* @deprecated This flag is deprecated and replaced by @ref MY_RADIO_RF24
*/
#ifdef MY_RADIO_NRF24
#warning MY_RADIO_NRF24 is deprecated, use MY_RADIO_RF24 instead.
#undef MY_RADIO_NRF24
#define MY_RADIO_RF24
#endif
/**
* @def MY_RADIO_RF24
* @brief Define this to use a RF24-based radio transport for sensor network communication.
*/
//#define MY_RADIO_RF24
/**
* @def MY_RF24_ENABLE_ENCRYPTION
* @brief Define this to enable software based %AES encryption.
*
* All nodes and gateway must have this enabled, and all must be personalized with the same %AES
* key.
* @see @ref personalization
*
* @warning This driver always sets the initialization vector to 0 so encryption is weak.
*/
//#define MY_RF24_ENABLE_ENCRYPTION
/**
* @def MY_DEBUG_VERBOSE_RF24
* @brief Define this for verbose debug prints related to the RF24 driver.
*/
//#define MY_DEBUG_VERBOSE_RF24
/**
* @def MY_RF24_SPI_SPEED
* @brief Define this if you need to run the SPI clock at a different frequency than the default.
*
* Default nRF24L01+ SPI speed, 2MHz should be safe for nRF24L01+ clones.
*/
#ifndef MY_RF24_SPI_SPEED
#define MY_RF24_SPI_SPEED (2*1000000ul)
#endif
/**
* @def MY_RF24_CE_PIN
* @brief Define this to change the chip enable pin from the default.
*/
#ifndef MY_RF24_CE_PIN
#define MY_RF24_CE_PIN (DEFAULT_RF24_CE_PIN)
#endif
/**
* @def MY_RF24_CS_PIN
* @brief Define this to change the chip select pin from the default.
*/
#ifndef MY_RF24_CS_PIN
#define MY_RF24_CS_PIN (DEFAULT_RF24_CS_PIN)
#endif
/**
* @def MY_RF24_IRQ_PIN
* @brief Define this to use the IRQ pin of the RF24 module (optional).
*/
//#define MY_RF24_IRQ_PIN (2)
/**
* @def MY_RF24_POWER_PIN
* @brief Define this to use the RF24 power pin (optional).
*/
//#define MY_RF24_POWER_PIN (3)
/**
* @def MY_RX_MESSAGE_BUFFER_FEATURE
* @brief This enables the receiving buffer feature.
*
* This feature is currently not supported for anything but RF24.
* Require @ref MY_RF24_IRQ_PIN to be set.
*
* Note: Not supported on ESP8266, ESP32, STM32, nRF5 and sketches
* that use SoftSPI. See below issue for details
* https://github.com/mysensors/MySensors/issues/1128
*/
//#define MY_RX_MESSAGE_BUFFER_FEATURE
/**
* @def MY_RX_MESSAGE_BUFFER_SIZE
* @brief Define this to change the incoming message buffer size from the default.
*
* Require @ref MY_RX_MESSAGE_BUFFER_FEATURE to be set.
*/
#ifdef MY_RX_MESSAGE_BUFFER_FEATURE
#ifndef MY_RX_MESSAGE_BUFFER_SIZE
#define MY_RX_MESSAGE_BUFFER_SIZE (20)
#endif
#endif
/**
* @def MY_RF24_PA_LEVEL
* @brief Default RF24 PA level. Override in sketch if needed.
*
* - RF24_PA_MIN = -18dBm
* - RF24_PA_LOW = -12dBm
* - RF24_PA_HIGH = -6dBm
* - RF24_PA_MAX = 0dBm
*/
#ifndef MY_RF24_PA_LEVEL
#define MY_RF24_PA_LEVEL (RF24_PA_HIGH)
#endif
/**
* @def MY_RF24_CHANNEL
* @brief RF channel for the sensor net, 0-125.
*
* Frequencies: 2400 Mhz - 2525 Mhz
*
* Channels: 126
* @see https://www.nordicsemi.com/eng/nordic/download_resource/8765/2/42877161/2726
*
* - 0 => 2400 Mhz (RF24 channel 1)
* - 1 => 2401 Mhz (RF24 channel 2)
* - 76 => 2476 Mhz (RF24 channel 77)
* - 83 => 2483 Mhz (RF24 channel 84)
* - 124 => 2524 Mhz (RF24 channel 125)
* - 125 => 2525 Mhz (RF24 channel 126)
*
* In some countries there might be limitations, in Germany for example only the range
* 2400,0 - 2483,5 Mhz is allowed.
* @see https://www.bundesnetzagentur.de/SharedDocs/Downloads/DE/Sachgebiete/Telekommunikation/Unternehmen_Institutionen/Frequenzen/Allgemeinzuteilungen/MobilfunkDectWlanCBFunk/2013_10_WLAN_2,4GHz_pdf.pdf
*/
#ifndef MY_RF24_CHANNEL
#define MY_RF24_CHANNEL (76)
#endif
/**
* @def MY_RF24_DATARATE
* @brief RF24 data rate.
*
* - RF24_250KBPS for 250kbs
* - RF24_1MBPS for 1Mbps
* - RF24_2MBPS for 2Mbps.
*
* @note nRF24L01, BK2401, BK2421, BK2491 and XN297 does not support RF24_250KBPS
* @note BK2401 does not support RF24_2MBPS
*/
#ifndef MY_RF24_DATARATE
#define MY_RF24_DATARATE (RF24_250KBPS)
#endif
/**
* @def MY_RF24_BASE_RADIO_ID
* @brief RF24 radio network identifier.
*
* This acts as base value for sensor nodeId addresses. Change this (or channel) if you have more
* than one sensor network.
*/
#ifndef MY_RF24_BASE_RADIO_ID
#define MY_RF24_BASE_RADIO_ID 0x00,0xFC,0xE1,0xA8,0xA8
#endif
/**
* @def MY_RF24_ADDR_WIDTH
* @brief RF24 base address width.
*/
#ifndef MY_RF24_ADDR_WIDTH
#define MY_RF24_ADDR_WIDTH (5)
#endif
/** @}*/ // End of RF24SettingGrpPub group
/**
* @defgroup NRF5SettingGrpPub nRF5
* @ingroup TransportSettingGrpPub
* @brief These options are specific to the nRF5 (with Enhanced ShockBurst) family of wireless
* transport modules.
*
* The nRF5 driver is OTA compatible with the RF24 driver.
*
* The following chips are supported by this driver:
* - nRF51x22
* - nRF52822
*
* @{
*/
/**
* @def MY_RADIO_NRF5_ESB
* @brief Define this to use nRF5 based radios for sensor network communication.
*
* @see ARDUINO_ARCH_NRF5
*/
//#define MY_RADIO_NRF5_ESB
/**
* @def MY_NRF5_ESB_ENABLE_ENCRYPTION
* @brief Define this to enable software based (RF24 compatible) %AES encryption.
*
* All nodes and gateway must have this enabled, and all must be personalized with the same %AES
* key.
* @see @ref personalization
*
* @warning This driver always sets the initialization vector to 0 so encryption is weak.
*/
//#define MY_NRF5_ESB_ENABLE_ENCRYPTION
/**
* @def MY_DEBUG_VERBOSE_NRF5_ESB
* @brief Define this for verbose debug prints related to the nRF5 driver.
*/
//#define MY_DEBUG_VERBOSE_NRF5_ESB
/**
* @def MY_NRF5_ESB_PA_LEVEL
* @brief Default nRF5 PA level. Override in sketch if needed.
*
* - NRF5_PA_MIN = -40dBm
* - NRF5_PA_LOW = -16dBm
* - NRF5_PA_HIGH = 0dBm
* - NRF5_PA_MAX = 4dBm
*/
#ifndef MY_NRF5_ESB_PA_LEVEL
#define MY_NRF5_ESB_PA_LEVEL (NRF5_PA_MAX)
#endif
/**
* @def MY_NRF5_ESB_CHANNEL
* @brief RF channel for the sensor net, 0-125.
*
* Frequencies: 2400 Mhz - 2525 Mhz
*
* Channels: 126
* @see https://www.nordicsemi.com/eng/nordic/download_resource/8765/2/42877161/2726
*
* - 0 => 2400 Mhz (RF24 channel 1)
* - 1 => 2401 Mhz (RF24 channel 2)
* - 76 => 2476 Mhz (RF24 channel 77)
* - 83 => 2483 Mhz (RF24 channel 84)
* - 124 => 2524 Mhz (RF24 channel 125)
* - 125 => 2525 Mhz (RF24 channel 126)
*
* In some countries there might be limitations, in Germany for example only the range
* 2400,0 - 2483,5 Mhz is allowed.
* @see http://www.bundesnetzagentur.de/SharedDocs/Downloads/DE/Sachgebiete/Telekommunikation/Unternehmen_Institutionen/Frequenzen/Allgemeinzuteilungen/2013_10_WLAN_2,4GHz_pdf.pdf
*/
#ifndef MY_NRF5_ESB_CHANNEL
#define MY_NRF5_ESB_CHANNEL (76)
#endif
/**
* @def MY_NRF5_ESB_MODE
* @brief nRF5 mode.
*
* - NRF5_250KBPS for 250kbs (Deprecated)
* - NRF5_1MBPS for 1Mbps
* - NRF5_2MBPS for 2Mbps.
* - NRF5_BLE_1MBPS for 1Mbps BLE modulation
*/
#ifndef MY_NRF5_ESB_MODE
#ifdef RADIO_MODE_MODE_Nrf_250Kbit
#define MY_NRF5_ESB_MODE (NRF5_250KBPS)
#else
#define MY_NRF5_ESB_MODE (NRF5_1MBPS)
#endif
#endif
/**
* @def MY_NRF5_ESB_BASE_RADIO_ID
* @brief nRF5 radio network identifier.
*
* This acts as base value for sensor nodeId addresses. Change this (or channel) if you have more
* than one sensor network.
*/
#ifndef MY_NRF5_ESB_BASE_RADIO_ID
#define MY_NRF5_ESB_BASE_RADIO_ID 0x00, 0xFC, 0xE1, 0xA8, 0xA8
#endif
/**
* @def MY_NRF5_ESB_ADDR_WIDTH
* @brief nRF5 base address width.
*/
#ifndef MY_NRF5_ESB_ADDR_WIDTH
#define MY_NRF5_ESB_ADDR_WIDTH (5)
#endif
/**
* @def MY_NRF5_ESB_RX_BUFFER_SIZE
* @brief Declare the amount of incoming messages that can be buffered at driver level.
*/
#ifndef MY_NRF5_ESB_RX_BUFFER_SIZE
#define MY_NRF5_ESB_RX_BUFFER_SIZE (20)
#endif
/**
* @def MY_NRF5_ESB_REVERSE_ACK_TX
* @brief Switch to SI24R1 or faked nRF24L01+ compatible ACK mode. ACK bit is reversed on TX side.
*/
//#define MY_NRF5_ESB_REVERSE_ACK_TX
/**
* @def MY_NRF5_ESB_REVERSE_ACK_RX
* @brief Switch to SI24R1 or faked nRF24L01+ compatible ACK mode. ACK bit is reversed on RX side.
*/
//#define MY_NRF5_ESB_REVERSE_ACK_RX
/** @}*/ // End of NRF5SettingGrpPub group
/**
* @defgroup RFM69SettingGrpPub RFM69
* @ingroup TransportSettingGrpPub
* @brief These options are specific to the %RFM69 family of wireless transport modules.
*
* The following chips are supported by this driver:
* - Semtech sx1231
*
* If using the HW variant of the %RFM69 module, define @ref MY_IS_RFM69HW.
* @{
*/
/**
* @def MY_RADIO_RFM69
* @brief Define this to use %RFM69 based radios for sensor network communication.
*/
//#define MY_RADIO_RFM69
/**
* @def MY_DEBUG_VERBOSE_RFM69
* @brief Define this for verbose debug prints related to the %RFM69 driver.
*/
//#define MY_DEBUG_VERBOSE_RFM69
/**
* @def MY_DEBUG_VERBOSE_RFM69_REGISTERS
* @brief Define this for verbose dumping of the %RFM69 registers.
*/
//#define MY_DEBUG_VERBOSE_RFM69_REGISTERS
/**
* @def MY_RFM69_NEW_DRIVER
* @brief Define this to enable the improved %RFM69 driver.
*
* @note This driver is not compatible with the old (=default) %RFM69 driver.
*/
//#define MY_RFM69_NEW_DRIVER
/**
* @def MY_RFM69_FREQUENCY
* @brief The frequency to use.
*
* - RFM69_315MHZ
* - RFM69_433MHZ
* - RFM69_865MHZ
* - RFM69_868MHZ
* - RFM69_915MHZ
* - Custom frequency in Hz (new %RFM69 driver only)
* @see MY_RFM69_NEW_DRIVER
*
* This must match the hardware version of the %RFM69 radio.
* Additional information: https://en.wikipedia.org/wiki/Short_Range_Devices
*/
#ifndef MY_RFM69_FREQUENCY
#define MY_RFM69_FREQUENCY (RFM69_868MHZ)
#endif
/**
* @def MY_IS_RFM69HW
* @brief Define this if you are using the RFM69HW model.
*/
//#define MY_IS_RFM69HW
/**
* @def MY_RFM69HW
* @brief Set to true if @ref MY_IS_RFM69HW is set.
*
* @todo Mark this internals
*/
#ifdef MY_IS_RFM69HW
#define MY_RFM69HW true
#else
#define MY_RFM69HW false
#endif
/**
* @def MY_RFM69_TX_POWER_DBM
* @brief Set TX power level, default 5dBm (overridden if ATC mode enabled).
*/
#ifndef MY_RFM69_TX_POWER_DBM
#define MY_RFM69_TX_POWER_DBM (5)
#endif
/**
* @def MY_RFM69_ATC_TARGET_RSSI_DBM
* @brief Target RSSI level (in dBm) for %RFM69 ATC mode.
*/
#ifndef MY_RFM69_ATC_TARGET_RSSI_DBM
#define MY_RFM69_ATC_TARGET_RSSI_DBM (-80)
#endif
/**
* @def MY_RFM69_ATC_MODE_DISABLED
* @brief Define to disable ATC mode of %RFM69 driver.
*/
//#define MY_RFM69_ATC_MODE_DISABLED
/**
* @def MY_RFM69_MAX_POWER_LEVEL_DBM
* @brief Set max TX power in dBm if local legislation requires this
*
* - 1mW = 0dBm
* - 10mW = 10dBm
* - 25mW = 14dBm
* - 100mW = 20dBm
*
* See here: https://en.wikipedia.org/wiki/Short_Range_Devices
*/
//#define MY_RFM69_MAX_POWER_LEVEL_DBM (10u)
/**
* @def MY_RFM69_NETWORKID
* @brief %RFM69 Network ID. Use the same for all nodes that will talk to each other.
*/
#ifndef MY_RFM69_NETWORKID
#define MY_RFM69_NETWORKID (100)
#endif
/**
* @def MY_RFM69_RST_PIN
* @brief Define this to use the %RFM69 reset pin (optional).
*/
//#define MY_RFM69_RST_PIN (9)
#ifdef MY_RF69_RESET
#warning MY_RF69_RESET is depreciated, please use MY_RFM69_RST_PIN instead.
#define MY_RFM69_RST_PIN MY_RF69_RESET
#endif
/**
* @def MY_RFM69_POWER_PIN
* @brief Define this to use the %RFM69 power pin (optional).
*/
//#define MY_RFM69_POWER_PIN (3)
/**
* @def MY_RFM69_IRQ_PIN
* @brief Define this to override the default %RFM69 IRQ pin assignment.
*/
#ifndef MY_RFM69_IRQ_PIN
#ifdef MY_RF69_IRQ_PIN
#warning MY_RF69_IRQ_PIN is depreciated, please use MY_RFM69_IRQ_PIN instead.
#define MY_RFM69_IRQ_PIN MY_RF69_IRQ_PIN
#else
#define MY_RFM69_IRQ_PIN DEFAULT_RFM69_IRQ_PIN
#endif
#endif
/**
* @def MY_RFM69_IRQ_NUM
* @brief %RFM69 IRQ number.
*/
#ifndef MY_RFM69_IRQ_NUM
#ifdef MY_RF69_IRQ_NUM
#warning MY_RF69_IRQ_NUM is depreciated, please use MY_RFM69_IRQ_NUM instead.
#define MY_RFM69_IRQ_NUM MY_RF69_IRQ_NUM
#else
#define MY_RFM69_IRQ_NUM digitalPinToInterrupt(MY_RFM69_IRQ_PIN)
#endif
#endif
/**
* @def MY_RFM69_CS_PIN
* @brief %RFM69 SPI chip select pin.
*/
#ifndef MY_RFM69_CS_PIN
#ifdef MY_RF69_SPI_CS
#warning MY_RF69_SPI_CS is depreciated, please use MY_RFM69_CS_PIN instead.
#define MY_RFM69_CS_PIN MY_RF69_SPI_CS
#else
#define MY_RFM69_CS_PIN DEFAULT_RFM69_CS_PIN
#endif
#endif
/**
* @def MY_RFM69_SPI_SPEED
* @brief Set to overrule default RFM69 SPI speed.
*/
#ifndef MY_RFM69_SPI_SPEED
#define MY_RFM69_SPI_SPEED (4*1000000ul) // datasheet says 10Mhz max.
#endif
/**
* @def MY_RFM69_ENABLE_ENCRYPTION
* @brief Define this to enable %AES encryption in the %RFM69 module.
*
* All nodes and gateway must have this enabled, and all must be personalized with the same %AES
* key.
* @see @ref personalization
*/
//#define MY_RFM69_ENABLE_ENCRYPTION
/**
* @def MY_RFM69_MODEM_CONFIGURATION
* @brief %RFM69 modem configuration, default is %RFM69_FSK_BR55_5_FD50
*
* | Configuration | Modulation (xxx) | Bit rate | FD | RXBW | Additional settings
* |-------------------------|------------------|----------|--------|----------|---------------------------
* | RFM69_xxx_BR2_FD5 | FSK/GFSK/OOK | 2000 | 5000 | 111_24_4 | Whitening
* | RFM69_xxx_BR2_4_FD4_8 | FSK/GFSK/OOK | 2400 | 4800 | 111_24_4 | Whitening
* | RFM69_xxx_BR4_8_FD9_6 | FSK/GFSK/OOK | 4800 | 9600 | 111_24_4 | Whitening
* | RFM69_xxx_BR9_6_FD19_2 | FSK/GFSK/OOK | 9600 | 19200 | 111_24_4 | Whitening
* | RFM69_xxx_BR19_2_FD38_4 | FSK/GFSK/OOK | 19200 | 38400 | 111_24_3 | Whitening
* | RFM69_xxx_BR38_4_FD76_8 | FSK/GFSK/OOK | 38400 | 76800 | 111_24_2 | Whitening
* | RFM69_xxx_BR55_5_FD50 | FSK/GFSK/OOK | 55555 | 50000 | 111_16_2 | Whitening
* | RFM69_xxx_BR57_6_FD120 | FSK/GFSK/OOK | 57600 | 120000 | 111_16_1 | Whitening
* | RFM69_xxx_BR125_FD125 | FSK/GFSK/OOK | 125000 | 125000 | 010_16_2 | Whitening
* | RFM69_xxx_BR250_FD250 | FSK/GFSK/OOK | 250000 | 250000 | 111_16_0 | Whitening
*
* https://www.semtech.com/uploads/documents/sx1231.pdf
*
*/
//#define MY_RFM69_MODEM_CONFIGURATION (RFM69_FSK_BR55_5_FD50)
/** @}*/ // End of RFM69SettingGrpPub group
/**
* @defgroup RFM95SettingGrpPub RFM95
* @ingroup TransportSettingGrpPub
* @brief These options are specific to the %RFM95 family of wireless transport modules.
*
* The following chips are supported by this driver:
* - Semtech sx1276
* @{
*/
/**
* @def MY_RADIO_RFM95
* @brief Define this to use RFM95 based radios for sensor network communication.
*/
//#define MY_RADIO_RFM95
/**
* @def MY_DEBUG_VERBOSE_RFM95
* @brief Define this for verbose debug prints related to the RFM95 driver.
*/
//#define MY_DEBUG_VERBOSE_RFM95
/**
* @def MY_RFM95_ENABLE_ENCRYPTION
* @brief Define this to enable software based %AES encryption.
*
* All nodes and gateway must have this enabled, and all must be personalized with the same %AES
* key.
* @see @ref personalization
*
* @warning This driver always sets the initialization vector to 0 so encryption is weak.
*/
//#define MY_RFM95_ENABLE_ENCRYPTION
/**
* @def MY_RFM95_FREQUENCY
* @brief The frequency to use.
*
* - RFM95_169MHZ
* - RFM95_315MHZ
* - RFM95_434MHZ
* - RFM95_868MHZ
* - RFM95_915MHZ
* - Custom frequency in Hz
*
* This must match the hardware version of the RFM95 radio.
* Additional information: https://en.wikipedia.org/wiki/Short_Range_Devices
*/
#ifndef MY_RFM95_FREQUENCY
#define MY_RFM95_FREQUENCY (RFM95_868MHZ)
#endif
/**
* @def MY_RFM95_MODEM_CONFIGRUATION
* @brief RFM95 modem configuration.
*
* BW = Bandwidth in kHz
* CR = Error correction code
* SF = Spreading factor, chips / symbol
*
* | CONFIG | BW | CR | SF | Comment
* |------------------------|-------|-----|------|-----------------------------
* | RFM95_BW125CR45SF128 | 125 | 4/5 | 128 | Default, medium range
* | RFM95_BW500CR45SF128 | 500 | 4/5 | 128 | Fast, short range
* | RFM95_BW31_25CR48SF512 | 31.25 | 4/8 | 512 | Slow, long range
* | RFM95_BW125CR48SF4096 | 125 | 4/8 | 4096 | Slow, long range
*
*/
#ifndef MY_RFM95_MODEM_CONFIGRUATION
#define MY_RFM95_MODEM_CONFIGRUATION RFM95_BW125CR45SF128
#endif
/**
* @def MY_RFM95_RST_PIN
* @brief Define this to use the RFM95 reset pin (optional).
*/
//#define MY_RFM95_RST_PIN (9)
/**
* @def MY_RFM95_POWER_PIN
* @brief Define this to use the RFM95 power pin (optional).
*/
//#define MY_RFM95_POWER_PIN (3)
/**
* @def MY_RFM95_IRQ_PIN
* @brief Define this to use the RFM95 IRQ pin.
*/
#ifndef MY_RFM95_IRQ_PIN
#define MY_RFM95_IRQ_PIN DEFAULT_RFM95_IRQ_PIN
#endif
/**
* @def MY_RFM95_IRQ_NUM
* @brief RFM95 IRQ number.
*/
#ifndef MY_RFM95_IRQ_NUM
#define MY_RFM95_IRQ_NUM digitalPinToInterrupt(MY_RFM95_IRQ_PIN)
#endif
/**
* @def MY_RFM95_CS_PIN
* @brief RFM95 SPI chip select pin.
*/
#ifndef MY_RFM95_CS_PIN
#define MY_RFM95_CS_PIN DEFAULT_RFM95_CS_PIN
#endif
/**
* @def MY_RFM95_SPI_SPEED
* @brief Set to overrule default RFM95 SPI speed.
*/
#ifndef MY_RFM95_SPI_SPEED
#define MY_RFM95_SPI_SPEED (4*1000000ul)
#endif
/**
* @def MY_RFM95_TX_POWER_DBM
* @brief Set TX power level, default 13dBm (overridden if ATC mode enabled)
*
* See here https://en.wikipedia.org/wiki/Short_Range_Devices
*/
#ifndef MY_RFM95_TX_POWER_DBM
#define MY_RFM95_TX_POWER_DBM (13u) // 20mW
#endif
/**
* @def MY_RFM95_ATC_MODE_DISABLED
* @brief Define to disable ATC mode of RFM95 driver.
*/
//#define MY_RFM95_ATC_MODE_DISABLED
/**
* @def MY_RFM95_ATC_TARGET_RSSI
* @brief Target RSSI level (in dBm) for RFM95 ATC mode
*/
#ifndef MY_RFM95_ATC_TARGET_RSSI
#define MY_RFM95_ATC_TARGET_RSSI (-70)
#endif
/**
* @def MY_RFM95_MAX_POWER_LEVEL_DBM
* @brief Set max TX power in dBm if local legislation requires this
*
* - 1mW = 0dBm
* - 10mW = 10dBm
* - 25mW = 14dBm
* - 100mW = 20dBm
*
* See here: https://en.wikipedia.org/wiki/Short_Range_Devices
*/
//#define MY_RFM95_MAX_POWER_LEVEL_DBM (10u)
/**
* @def MY_RFM95_TCXO
* @brief Enable to force your radio to use an external frequency source (e.g. TCXO, if present).
*
* This allows for better stability using SF 9 to 12.
*/
//#define MY_RFM95_TCXO
/** @}*/ // End of RFM95SettingGrpPub group
/**
* @defgroup SX126xSettingGrpPub SX126x
* @ingroup TransportSettingGrpPub
* @brief These options are specific to the %SX126x family of wireless transport modules.
*
* The following chips are supported by this driver:
* - Semtech sx1261
* - Semtech sx1262
* @{
*/
/**
* @def MY_RADIO_SX126x
* @brief Define this to use SX126x based radios for sensor network communication.
*/
//#define MY_RADIO_SX126x
/**
* @def MY_SX126x_CS_PIN
* @brief sx126x SPI chip select pin.
*/
#ifndef MY_SX126x_CS_PIN
#define MY_SX126x_CS_PIN DEFAULT_SX126x_CS_PIN
#endif
/**
* @def MY_SX126x_IRQ_PIN
* @brief xs126x IRQ pin (DIO1)
*/
#ifndef MY_SX126x_IRQ_PIN
#define MY_SX126x_IRQ_PIN DEFAULT_SX126x_IRQ_PIN
#endif
/**
* @def MY_SX126x_FREQUENCY
* @brief The frequency to use.
*
* - SX126x_169MHZ
* - SX126x_315MHZ
* - SX126x_434MHZ
* - SX126x_868MHZ
* - SX126x_915MHZ
* - Custom frequency in Hz
*
* This must match the hardware version of the SX126x radio.
* Additional information: https://en.wikipedia.org/wiki/Short_Range_Devices
*/
#ifndef MY_SX126x_FREQUENCY
#define MY_SX126x_FREQUENCY (SX126x_868MHZ)
#endif
/**
* @def MY_SX126x_LORA_SF
* @brief The LoRa spreading factor to use
*
* can be LORA_SF5, LORA_SF6, LORA_SF7, LORA_SF8, LORA_SF9, LORA_SF10,
* LORA_SF11 or LORA_SF12
*
* default is LORA_SF7
*/
#ifndef MY_SX126x_LORA_SF
#define MY_SX126x_LORA_SF LORA_SF7
#endif
/**
* @def MY_SX126x_LORA_BW
* @brief The LoRa bandwidth to use
*
* possible values
* | value | Bandwith |
* |-------------|-----------|
* | LORA_BW_500 | 500 kHz |
* | LORA_BW_250 | 250 kHz |
* | LORA_BW_125 | 125 kHz |
* | LORA_BW_062 | 62.5 kHz |
* | LORA_BW_041 | 41.67 kHz |
* | LORA_BW_031 | 31.25 kHz |
* | LORA_BW_020 | 20.83 kHz |
* | LORA_BW_015 | 15.63 kHz |
* | LORA_BW_010 | 10.45 kHz |
* | LORA_BW_007 | 7.81 kHz |
*
* default is LORA_BW_125
*/
#ifndef MY_SX126x_LORA_BW
#define MY_SX126x_LORA_BW LORA_BW_125
#endif
/**
* @def MY_SX126x_LORA_CR
* @brief The LoRa coding rate to use
*
* Possible values are
* | value | Coding rate |
* |-------------|-------------|
* | LORA_CR_4_5 | 4/5 |
* | LORA_CR_4_6 | 4/6 |
* | LORA_CR_4_7 | 4/7 |
* | LORA_CR_4_8 | 4/8 |
*
* Default is LORA_CR_4_5
*/
#ifndef MY_SX126x_LORA_CR
#define MY_SX126x_LORA_CR LORA_CR_4_5
#endif
/**
* @def MY_SX126x_TCXO_VOLTAGE
* @brief TCXO output voltage for internal TCXO control
*
* If set, DIO3 will be used to provide power to the TCXO when needed
*
* SX126x_TCXO_1V6 1.6V TCXO voltage
* SX126x_TCXO_1V7 1.7V TCXO voltage
* SX126x_TCXO_1V8 1.8V TCXO voltage
* SX126x_TCXO_2V2 2.2V TCXO voltage
* SX126x_TCXO_2V4 2.4V TCXO voltage
* SX126x_TCXO_2V7 2.7V TCXO voltage
* SX126x_TCXO_3V0 3.0V TCXO voltage
* SX126x_TCXO_3V3 3.3V TCXO voltage
*
* However, the TCXO output voltage is at most 200mV below the supply voltage.
**/
//#define MY_SX126x_TCXO_VOLTAGE (SX126x_TCXO_3V3)
/**
* @def MY_SX126c_TCXO_STARTUP_DELAY
* @brief Time in ms it takes the TXCO to start up and stabilize
*
* Will be set to 10ms if @ref MY_SX126x_TCXO_VOLTAGE is set but @ref MY_SX126c_TCXO_STARTUP_DELAY
* is not set.
**/
#if !defined(MY_SX126c_TCXO_STARTUP_DELAY) && defined(MY_SX126x_TCXO_VOLTAGE)
#define MY_SX126c_TCXO_STARTUP_DELAY (10)
#endif
/**
* @def MY_SX126x_USE_TCXO
* @brief The board has a TCXO for SX126x frequency generation
*
* This will be forced if @ref MY_SX126x_TCXO_VOLTAGE or @ref MY_SX126c_TCXO_STARTUP_DELAY are set
**/
#if !defined(MY_SX126x_USE_TCXO) && defined(MY_SX126x_TCXO_VOLTAGE)
#define MY_SX126x_USE_TCXO
#endif
/**
* @def MY_SX126x_USE_DIO2_ANT_SWITCH
* @brief Use DIO2 as antenna switch output.
*/
//#define MY_SX126x_USE_DIO2_ANT_SWITCH
/**
* @def MY_SX126x_ANT_SWITCH_PIN
* @brief Pin to switch antenna circuit between RX and TX mode
*
* Not needed if DIO2 is connected to the antenna switch circuit. Then you have to set
* @ref MY_SX126x_USE_DIO2_ANT_SWITCH
*/
//#define MY_SX126x_ANT_SWITCH_PIN (GPIO3)
/**
* @def MY_SX126x_VARIANT
* @brief details if it's a sx1261 or sx1262
*
* - 1: sx1261
* - 2: sx1262
* If not set, sx1262 is selected
*/
#if !defined(MY_SX126x_VARIANT)
#define MY_SX126x_VARIANT (1)
#endif
/**
* @def MY_SX126x_POWER_PIN
* @brief Define this to use the SX126x power pin (optional).
*/
//#define MY_SX126x_POWER_PIN (3)
/**
* @def MY_SX126x_RESET_PIN
* @brief Define this to use the SX126x reset pin (optional).
*/
//#define MY_SX126x_RESET_PIN (47)
/**
* @def MY_SX126x_BUSY_PIN
* @brief Defines this to use the SX126x busy pin (optional).
*/
//#define MY_SX126x_BUSY_PIN (39)
/**
* @def MY_SX126x_DISABLE_ATC
* @brief If defined, ATC will be disabled
*/
//#define MY_SX126x_DISABLE_ATC
/**
* @def MY_SX126x_ATC_TARGET_DBM
* @brief Sets the target RSSI level for the ATC. Defaults to -70dBm
*/
#ifndef MY_SX126x_ATC_TARGET_DBM
#define MY_SX126x_ATC_TARGET_DBM (-70)
#endif
/**
* @def MY_SX126x_MAX_POWER_LEVEL_DBM
* @brief Sets the maximum allowable output power level. Default: 13dBm (20mW)
*
* Please check local regulations!
*/
#ifndef MY_SX126x_MAX_POWER_LEVEL_DBM
#define MY_SX126x_MAX_POWER_LEVEL_DBM (20)
#endif
/**
* @def MY_SX126x_MIN_POWER_LEVEL_DBM
* @brief Sets the minimum output power level. Used in ATC. Default: 0dBm (0.5mW)
*/
#ifndef MY_SX126x_MIN_POWER_LEVEL_DBM
#define MY_SX126x_MIN_POWER_LEVEL_DBM (-3)
#endif
/** @}*/ // End of SX126xSettingGrpPub group
/**
* @defgroup SoftSpiSettingGrpPub Soft SPI
* @ingroup TransportSettingGrpPub
* @brief These options are specific the soft SPI driver for certain radio transport drivers.
*
* The following transport drivers supported by this driver:
* - The RF24 driver @see RF24SettingGrpPub
* - The new %RFM69 driver @see RFM69SettingGrpPub @see MY_RFM69_NEW_DRIVER
* - The RFM95 driver @see RFM95SettingGrpPub
* @{
*/
/**
* @def MY_SOFTSPI
* @brief Define this to use a software based SPI driver which allows more freedom in pin selection
* for the (supported) radio module.
*/
//#define MY_SOFTSPI
/**
* @def MY_SOFT_SPI_SCK_PIN
* @brief Soft SPI SCK pin.
*/
#ifndef MY_SOFT_SPI_SCK_PIN
#define MY_SOFT_SPI_SCK_PIN (14)
#endif
/**
* @def MY_SOFT_SPI_MISO_PIN
* @brief Soft SPI MISO pin.
*/
#ifndef MY_SOFT_SPI_MISO_PIN
#define MY_SOFT_SPI_MISO_PIN (16)
#endif
/**
* @def MY_SOFT_SPI_MOSI_PIN
* @brief Soft SPI MOSI pin.
*/
#ifndef MY_SOFT_SPI_MOSI_PIN
#define MY_SOFT_SPI_MOSI_PIN (15)
#endif
/** @}*/ // End of SoftSpiSettingGrpPub group
/** @}*/ // End of TransportSettingGrpPub group
/**
* @defgroup RoutingNodeSettingGrpPub Routing and node
* @ingroup MyConfigGrp
* @brief These options control message routing and node configurations.
* @{
*/
/**
* @def MY_DISABLE_RAM_ROUTING_TABLE_FEATURE
* @ingroup memorysavings
* @brief If defined, routing table will not be kept in RAM.
* @see MY_RAM_ROUTING_TABLE_FEATURE
*/
/**
* @def MY_RAM_ROUTING_TABLE_FEATURE
* @brief If enabled, the routing table is kept in RAM (if memory allows) and saved in regular
* intervals.
* @note Enabled by default on most platforms, but on AVR only for atmega1280, atmega1284 and
* atmega2560.
* @see MY_DISABLE_RAM_ROUTING_TABLE_FEATURE
*/
#ifndef MY_DISABLE_RAM_ROUTING_TABLE_FEATURE
#define MY_RAM_ROUTING_TABLE_FEATURE
#endif
/**
* @def MY_ROUTING_TABLE_SAVE_INTERVAL_MS
* @brief Interval to dump content of routing table to EEPROM
*/
#ifndef MY_ROUTING_TABLE_SAVE_INTERVAL_MS
#define MY_ROUTING_TABLE_SAVE_INTERVAL_MS (30*60*1000ul)
#endif
/**
* @def MY_REPEATER_FEATURE
* @brief Enables repeater functionality (relays messages from other nodes)
* @note Repeaters need to be constantly kept awake to be useful. They are therefore not suitable
* for battery powered operation.
*/
//#define MY_REPEATER_FEATURE
/**
* @def MY_PASSIVE_NODE
* @brief If enabled, the node operates fully autonomously, i.e. messages are sent without ACKing.
*
* @note All transport-related checks and safety-mechanisms are disabled.
* @note Requires that @ref MY_NODE_ID is set, @ref MY_PARENT_NODE_ID and
* @ref MY_PARENT_NODE_IS_STATIC are optional.
* @note Singing, registration, and OTA FW update are disabled.
*/
//#define MY_PASSIVE_NODE
/**
* @def MY_NODE_ID
* @brief Node id defaults to AUTO (tries to fetch id from controller).
*/
#ifndef MY_NODE_ID
#define MY_NODE_ID (AUTO)
#endif
/**
* @def MY_PARENT_NODE_ID
* @brief Node parent defaults to AUTO (tries to find a parent automatically).
*/
#ifndef MY_PARENT_NODE_ID
#define MY_PARENT_NODE_ID (AUTO)
#endif
/**
* @def MY_PARENT_NODE_IS_STATIC
* @brief Define MY_PARENT_NODE_IS_STATIC to disable fall back if parent node fails
*/
//#define MY_PARENT_NODE_IS_STATIC
/**
* @def MY_TRANSPORT_SANITY_CHECK
* @brief If defined, will cause node to check transport in regular intervals to detect HW issues
* and re-initialize in case of failure.
* @note This feature is enabled for all repeater nodes (incl. GW)
*/
//#define MY_TRANSPORT_SANITY_CHECK
/**
* @def MY_TRANSPORT_SANITY_CHECK_INTERVAL_MS
* @brief Interval (in ms) for transport sanity checks
*/
#ifndef MY_TRANSPORT_SANITY_CHECK_INTERVAL_MS
#define MY_TRANSPORT_SANITY_CHECK_INTERVAL_MS (15*60*1000ul)
#endif
/**
* @def MY_TRANSPORT_DISCOVERY_INTERVAL_MS
* @brief This is a gateway-only feature: Interval (in ms) to issue network discovery checks
*/
#ifndef MY_TRANSPORT_DISCOVERY_INTERVAL_MS
#define MY_TRANSPORT_DISCOVERY_INTERVAL_MS (20*60*1000ul)
#endif
/**
*@def MY_TRANSPORT_UPLINK_CHECK_DISABLED
*@brief If defined, disables uplink check to GW during transport initialisation
*/
//#define MY_TRANSPORT_UPLINK_CHECK_DISABLED
/**
*@def MY_TRANSPORT_MAX_TX_FAILURES
*@brief Define to override max. consecutive TX failures until SNP is initiated
*/
//#define MY_TRANSPORT_MAX_TX_FAILURES (10u)
/**
* @def MY_TRANSPORT_WAIT_READY_MS
* @brief Timeout in ms until transport is ready during startup, set to 0 for no timeout
*/
#ifndef MY_TRANSPORT_WAIT_READY_MS
#define MY_TRANSPORT_WAIT_READY_MS (0)
#endif
/**
* @def MY_SIGNAL_REPORT_ENABLED
* @brief Enables signal report functionality.
* @note This feature adds ~1kB code to the sketch.
*/
//#define MY_SIGNAL_REPORT_ENABLED
/** @}*/ // End of RoutingNodeSettingGrpPub group
/**
* @defgroup RegistrationSettingGrpPub Node registration
* @ingroup MyConfigGrp
* @brief These options control node registration configurations.
* @{
*/
/**
* @def MY_REGISTRATION_FEATURE
* @brief If enabled, node has to register to GW/controller before being allowed to send sensor
* data.
* @note Enabled by default.
*/
#define MY_REGISTRATION_FEATURE
/**
* @def MY_REGISTRATION_RETRIES
* @brief Number of registration retries if no reply received from GW/controller.
*/
#ifndef MY_REGISTRATION_RETRIES
#define MY_REGISTRATION_RETRIES (3u)
#endif
/**
* @def MY_REGISTRATION_DEFAULT
* @brief Node registration default - this applies if no registration response is received from
* controller.
*/
#define MY_REGISTRATION_DEFAULT (true)
/**
* @def MY_REGISTRATION_CONTROLLER
* @brief If defined, node registration request has to be handled by controller
*/
//#define MY_REGISTRATION_CONTROLLER
/** @}*/ // End of RegistrationSettingGrpPub group
/**
* @defgroup CoreSettingGrpPub Core
* @ingroup MyConfigGrp
* @brief These options control the library core configurations.
* @{
*/
/**
* @def MY_CORE_ONLY
* @brief Define this if you want to use core functions without loading the framework.
*/
//#define MY_CORE_ONLY
/**
* @def MY_CORE_COMPATIBILITY_CHECK
* @brief If defined, library compatibility is checked during node registration.
* Incompatible libraries are unable to send sensor data.
*/
#define MY_CORE_COMPATIBILITY_CHECK
/** @}*/ // End of CoreSettingGrpPub group
/**
* @defgroup SleepSettingGrpPub Sleep
* @ingroup MyConfigGrp
* @brief These options control sleep configurations.
* @{
*/
/**
* @def MY_SLEEP_TRANSPORT_RECONNECT_TIMEOUT_MS
* @brief Timeout (in ms) to re-establish link if node is send to sleep and transport is not ready.
*/
#ifndef MY_SLEEP_TRANSPORT_RECONNECT_TIMEOUT_MS
#define MY_SLEEP_TRANSPORT_RECONNECT_TIMEOUT_MS (10*1000ul)
#endif
/**
* @def MY_SMART_SLEEP_WAIT_DURATION_MS
* @brief The wait period (in ms) before going to sleep when using smartSleep-functions.
*
* This period has to be long enough for controller to be able to send out
* potential buffered messages.
*/
#ifndef MY_SMART_SLEEP_WAIT_DURATION_MS
#define MY_SMART_SLEEP_WAIT_DURATION_MS (500ul)
#endif
/**
* @def MY_SLEEP_HANDLER
* @brief Define this to enable the custom pre- & post-sleep handler.
*
* Sleep handler is invoked right before entering the sleep function, as well a just after the sleep
* completes. Applications can use this handler to turn off peripherals or put pins into a best
* possible low power state according to the concrete hardware design.
*/
//#define MY_SLEEP_HANDLER
/** @}*/ // End of SleepSettingGrpPub group
/**
* @defgroup OTASettingGrpPub Over The Air firmware
* @ingroup MyConfigGrp
* @brief These options control OTA firmware configurations.
* @{
*/
/**
* @def MY_OTA_FIRMWARE_FEATURE
* @brief Define this in sketch to allow safe over-the-air firmware updates.
*
* This feature requires external flash and the DualOptiBoot boot-loader.
* @note You can still have OTA FW updates without external flash but it
* requires the MYSBootloader and you must not define this flag.
*/
//#define MY_OTA_FIRMWARE_FEATURE
/**
* @def MY_OTA_FLASH_SS
* @brief Slave select pin for external flash used for OTA.
*/
#ifndef MY_OTA_FLASH_SS
#define MY_OTA_FLASH_SS (8)
#endif
/**
* @def MY_OTA_FLASH_JDECID
* @brief Flash JDECID used for OTA. Use (0x00) if unknown.
*/
#ifndef MY_OTA_FLASH_JDECID
#define MY_OTA_FLASH_JDECID (0x1F65)
#endif
/**
* @def MY_DISABLE_REMOTE_RESET
* @brief Disables over-the-air reset of node
*/
//#define MY_DISABLE_REMOTE_RESET
/** @}*/ // End of OTASettingGrpPub group
/**
* @defgroup GatewaySettingGrpPub Gateway
* @ingroup MyConfigGrp
* @brief These options control gateway specific configurations.
* @{
*/
/**
* @def MY_GATEWAY_MAX_RECEIVE_LENGTH
* @brief Max buffersize needed for messages coming from controller.
*/
#ifndef MY_GATEWAY_MAX_RECEIVE_LENGTH
#define MY_GATEWAY_MAX_RECEIVE_LENGTH (100u)
#endif
/**
* @def MY_GATEWAY_MAX_SEND_LENGTH
* @brief Max buffer size when sending messages.
*/
#ifndef MY_GATEWAY_MAX_SEND_LENGTH
#define MY_GATEWAY_MAX_SEND_LENGTH (120u)
#endif
/**
* @def MY_GATEWAY_MAX_CLIENTS
* @brief Max number of parallel clients (sever mode).
*/
#ifndef MY_GATEWAY_MAX_CLIENTS
#define MY_GATEWAY_MAX_CLIENTS (1u)
#endif
/**
* @def MY_INCLUSION_MODE_FEATURE
* @brief Define this to enable the inclusion mode feature.
*/
//#define MY_INCLUSION_MODE_FEATURE
/**
* @def MY_INCLUSION_BUTTON_FEATURE
* @brief Enables inclusion-mode button feature on the gateway device.
*
* With this defined, you can put the GW in inclusion mode by pressing a button attached to the GW.
*/
//#define MY_INCLUSION_BUTTON_FEATURE
// Disable inclusion mode button if inclusion mode feature is not enabled
#ifndef MY_INCLUSION_MODE_FEATURE
#undef MY_INCLUSION_BUTTON_FEATURE
#endif
/**
* @def MY_INCLUSION_LED_PIN
* @brief Enables an inclusion mode LED indicator on the gateway device.
*
* With this defined, inclusion mode status (on or off) is indicated by the LED.
* This feature obeys @ref MY_WITH_LEDS_BLINKING_INVERSE
*/
//#define MY_INCLUSION_LED_PIN (7)
/**
* @def MY_INCLUSION_MODE_BUTTON_PIN
* @brief The default input pin used for the inclusion mode button.
*/
#ifndef MY_INCLUSION_MODE_BUTTON_PIN
#if defined(ARDUINO_ARCH_ESP8266)
#define MY_INCLUSION_MODE_BUTTON_PIN (5)
#else
#define MY_INCLUSION_MODE_BUTTON_PIN (3)
#endif
#endif
/**
* @def MY_INCLUSION_MODE_DURATION
* @brief Number of seconds inclusion mode should be enabled.
*/
#ifndef MY_INCLUSION_MODE_DURATION
#define MY_INCLUSION_MODE_DURATION (60)
#endif
/**
* @def MY_INCLUSION_BUTTON_EXTERNAL_PULLUP
* @brief Define this to change the default state for @ref MY_INCLUSION_BUTTON_PRESSED.
*/
/**
* @def MY_INCLUSION_BUTTON_PRESSED
* @brief The logical level indicating a pressed inclusion mode button.
*
* If @ref MY_INCLUSION_BUTTON_EXTERNAL_PULLUP is defined, this defaults to HIGH.
*/
#if defined(MY_INCLUSION_BUTTON_EXTERNAL_PULLUP)
#define MY_INCLUSION_BUTTON_PRESSED (HIGH)
#else
#define MY_INCLUSION_BUTTON_PRESSED (LOW)
#endif
/**************************************
* Ethernet Gateway Transport Defaults
***************************************/
/**
* @def MY_GATEWAY_W5100
* @brief Define this for Ethernet GW based on the W5100 module.
* @def MY_GATEWAY_ENC28J60
* @brief Define this for Ethernet GW based on the ENC28J60 module.
* @def MY_GATEWAY_ESP8266
* @brief Define this for Ethernet GW based on the ESP8266.
* @def MY_GATEWAY_ESP8266_SECURE
* @brief Define this for Ethernet GW based on the ESP8266 with TLS.
* @def MY_GATEWAY_ESP32
* @brief Define this for Ethernet GW based on the ESP32.
* @def MY_GATEWAY_LINUX
* @brief Define this for Ethernet GW based on Linux.
* @def MY_GATEWAY_TINYGSM
* @brief Define this for Ethernet GW based on GSM modems supported by TinyGSM library.
* @def MY_GATEWAY_MQTT_CLIENT
* @brief Define this for MQTT client GW.
* @def MY_GATEWAY_SERIAL
* @brief Define this for Serial GW.
*/
// The gateway options available
//#define MY_GATEWAY_W5100
//#define MY_GATEWAY_ENC28J60
//#define MY_GATEWAY_ESP8266
//#define MY_GATEWAY_ESP8266_SECURE
//#define MY_GATEWAY_ESP32
//#define MY_GATEWAY_LINUX
//#define MY_GATEWAY_TINYGSM
//#define MY_GATEWAY_MQTT_CLIENT
//#define MY_GATEWAY_SERIAL
/**
* @def MY_DEBUG_VERBOSE_GATEWAY
* @brief Define this for verbose debug prints related to the gateway transport.
*/
//#define MY_DEBUG_VERBOSE_GATEWAY
/**
* @def MY_WIFI_SSID
* @brief SSID of your WiFi network
*/
//#define MY_WIFI_SSID "MySSID"
/**
* @def MY_WIFI_BSSID
* @brief BSSID of your WiFi network
*/
#ifndef MY_WIFI_BSSID
#define MY_WIFI_BSSID NULL
#endif
/**
* @def MY_WIFI_PASSWORD
* @brief Password of your WiFi network
*/
//#define MY_WIFI_PASSWORD "MyVerySecretPassword"
/**
* @def MY_HOSTNAME
* @brief Hostname of your device. Only supported on ESP8266 and ESP32.
*/
#ifndef MY_HOSTNAME
#define MY_HOSTNAME "MYSENSORS_DEVICE"
#endif
/**
* @def MY_PORT
* @brief The Ethernet TCP/UDP port to open on controller or gateway.
*/
#ifndef MY_PORT
#ifdef MY_GATEWAY_MQTT_CLIENT
#define MY_PORT 1883
#else
#define MY_PORT 5003
#endif
#endif
/**
* @def MY_MQTT_CLIENT_PUBLISH_RETAIN
* @brief Enables MQTT client to set the retain flag when publishing specific messages.
*/
//#define MY_MQTT_CLIENT_PUBLISH_RETAIN
/**
* @def MY_MQTT_PASSWORD
* @brief Used for authenticated MQTT connections.
*
* Set if your MQTT broker requires username/password.
* Example: @code #define MY_MQTT_PASSWORD "secretpassword" @endcode
* @see MY_MQTT_USER
*/
//#define MY_MQTT_PASSWORD "secretpassword"
/**
* @def MY_MQTT_USER
* @brief Used for authenticated MQTT connections.
*
* Set if your MQTT broker requires username/password.
* Example: @code #define MY_MQTT_USER "username" @endcode
* @see MY_MQTT_PASSWORD
*/
//#define MY_MQTT_USER "username"
/**
* @def MY_MQTT_CLIENT_ID
* @brief Set client ID for MQTT connections
*
* This define is mandatory for all MQTT client gateways.
* Example: @code #define MY_MQTT_CLIENT_ID "mysensors-1" @endcode
*/
//#define MY_MQTT_CLIENT_ID "mysensors-1"
/**
* @def MY_MQTT_PUBLISH_TOPIC_PREFIX
* @brief Set prefix for MQTT topic to publish to.
*
* This define is mandatory for all MQTT client gateways.
* Example: @code #define MY_MQTT_PUBLISH_TOPIC_PREFIX "mygateway1-out" @endcode
*/
//#define MY_MQTT_PUBLISH_TOPIC_PREFIX "mygateway1-out"
/**
* @def MY_MQTT_SUBSCRIBE_TOPIC_PREFIX
* @brief Set prefix for MQTT topic to subscribe to.
*
* This define is mandatory for all MQTT client gateways.
* Example: @code #define MY_MQTT_SUBSCRIBE_TOPIC_PREFIX "mygateway1-in" @endcode
*/
//#define MY_MQTT_SUBSCRIBE_TOPIC_PREFIX "mygateway1-in"
/**
* @def MY_MQTT_CA_CERT1
* @brief Up to three root Certificates Authorities could be defined to validate the mqtt server' certificate. The most secure.
*
* This define is mandatory when you need connect MQTT over SSL/TLS. Certificate Authorities.
* The best method to validate server certificates.
* Advised to retrieve root Certificate Authorities as they expire less often than server certificates.
* With let's encrypt you may need up to three Certificate Authorities
*
* Example: @code
*
* const char cert_isrgrootx1_Authority[] PROGMEM = R"EOF(
* ----- BEGIN THE CERTIFICATE -----
* XXX ... XXX
* ----- FINISH CERTIFICATE -----
* )EOF";
*
* const char cert_isrgrootx2_Authority[] PROGMEM = R"EOF(
* ----- BEGIN THE CERTIFICATE -----
* XXX ... XXX
* ----- FINISH CERTIFICATE -----
* )EOF";
*
* const char cert_letsEncryptR3_Authority[] PROGMEM = R"EOF(
* ----- BEGIN THE CERTIFICATE -----
* XXX ... XXX
* ----- FINISH CERTIFICATE -----
* )EOF";
*
* #define MY_MQTT_CA_CERT1 cert_isrgrootx1_Authority
* #define MY_MQTT_CA_CERT2 cert_isrgrootx2_Authority
* #define MY_MQTT_CA_CERT3 cert_letsEncryptR3_Authority
*
* @endcode
*/
//#define MY_MQTT_CA_CERT1
/**
* @def MY_MQTT_CA_CERT2
* @brief Up to three root Certificates Authorities could be defined to validate the mqtt serv.
*/
//#define MY_MQTT_CA_CERT2
/**
* @def MY_MQTT_CA_CERT3
* @brief Up to three root Certificates Authorities could be defined to validate the mqtt serv.
*/
//#define MY_MQTT_CA_CERT3
/**
* @def MY_MQTT_FINGERPRINT
* @brief Server certificate validation with its fingerprint
*
* The finger print to validate the mqtt server certificate. This is less secure and less convenient
* than using certificate authorities.
* Command (3 lines...) to obtain the certificate finger print:
* @code
* $>openssl s_client -connect <hostname>:<host port> < /dev/null 2>/dev/null | \
* openssl x509 -fingerprint -noout -in /dev/stdin \
* awk -F= '{print $2}'
* @endcode
*
* Example: @code
* const char mqtt_fingerprint [] PROGMEM = "CA:CE:2B:MD:D3:32:A3:F1:8C:73:9E:1B:B7:D5:75:4A:10:61:E4:05";
* @endcode
*/
//#define MY_MQTT_FINGERPRINT
/**
* @def MY_MQTT_CLIENT_CERT
* @brief Set a client certificate to send to a MQTT server that requests one over TLS connection.
*
* This define is mandatory when you need connect MQTT over SSL/TLS and client certificate is requested.
* Example: @code
*
* const char mqtt_client_cert[] PROGMEM = R"EOF(
* ----- BEGIN THE CERTIFICATE -----
* XXX ... XXX
* ----- FINISH CERTIFICATE -----
* )EOF";
*
* #define MY_MQTT_CLIENT_CERT mqtt_client_cert
*
* @endcode
*/
//#define MY_MQTT_CLIENT_CERT
/**
* @def MY_MQTT_CLIENT_KEY
* @brief Set the client private key generated with the MY_MQTT_CLIENT_CERT.
*
* This define is mandatory when you need connect MQTT over SSL/TLS and client certificate is requested.
* Example: @code
*
* const char mqtt_client_key[] PROGMEM = R"EOF(
* ----- START THE RSA PRIVATE KEY -----
* XXX ... XXX
* ----- FINISH THE RSA PRIVATE KEY -----
* )EOF";
*
* #define MY_MQTT_CLIENT_KEY mqtt_client_key
*
* @endcode
*/
//#define MY_MQTT_CLIENT_KEY
/**
* @def MY_IP_ADDRESS
* @brief Static ip address of gateway. If not defined, DHCP will be used.
*
* Example: @code #define MY_IP_ADDRESS 192,168,178,66 @endcode
*/
//#define MY_IP_ADDRESS 192,168,178,66
/**
* @def MY_IP_GATEWAY_ADDRESS
* @brief IP address of your broadband router/gateway, if not using DHCP.
*
* Example: @code #define MY_IP_GATEWAY_ADDRESS 192,168,1,1 @endcode
*/
//#define MY_IP_GATEWAY_ADDRESS 192,168,1,1
/**
* @def MY_IP_SUBNET_ADDRESS
* @brief Subnet address of your local network, if not using DHCP.
*
* Example: @code #define MY_IP_SUBNET_ADDRESS 255,255,255,0 @endcode
*/
//#define MY_IP_SUBNET_ADDRESS 255,255,255,0
/**
* @def MY_USE_UDP
* @brief Enables UDP mode for Ethernet gateway.
* @note This is not supported on ENC28J60 and Linux based GWs.
*/
//#define MY_USE_UDP
/**
* @def MY_MAC_ADDRESS
* @brief Ethernet MAC address.
* @note This needs to be unique on the network.
*/
#ifndef MY_MAC_ADDRESS
#define MY_MAC_ADDRESS 0xDE,0xAD,0xBE,0xEF,0xFE,0xED
#endif
/**
* @def MY_CONTROLLER_IP_ADDRESS
* @brief If this is defined, gateway will act as a client trying to contact controller on
* @ref MY_PORT using this IP address.
*
* Example: @code #define MY_CONTROLLER_IP_ADDRESS 192,168,178,254 @endcode
*
* If left un-defined, gateway acts as server allowing incoming connections.
* @see MY_CONTROLLER_URL_ADDRESS
*/
//#define MY_CONTROLLER_IP_ADDRESS 192,168,178,254
/**
* @def MY_CONTROLLER_URL_ADDRESS
* @brief If this is defined, gateway will act as a client (ethernet or MQTT) trying to
* contact controller on the given URL.
*
* If left un-defined, gateway acts as server allowing incoming connections.
* Example: @code #define MY_CONTROLLER_URL_ADDRESS "test.mosquitto.org" @endcode
* @see MY_CONTROLLER_IP_ADDRESS
* @see MY_GATEWAY_MQTT_CLIENT
*/
//#define MY_CONTROLLER_URL_ADDRESS "test.mosquitto.org"
/** @}*/ // End of GatewaySettingGrpPub group
/**
* @defgroup GSMSettingGrpPub GSM
* @ingroup MyConfigGrp
* @brief These options control GSM specific configurations.
* @{
*/
/**
* @def MY_GSM_APN
* @brief APN from your cell carrier / mobile provider. Example: 4g.tele2.se
*/
//#define MY_GSM_APN
/**
* @def MY_GSM_BAUDRATE
* @brief Baudrate for your GSM modem. If left undefined, TinyGSM will try to auto detect the correct rate
*/
//#define MY_GSM_BAUDRATE (9600u)
/**
* @def MY_GSM_PIN
* @brief PIN code for your SIM card, if PIN lock is active.
*/
//#define MY_GSM_PIN
/**
* @def MY_GSM_PSW
* @brief If using a GSM modem, this is the password supplied by your cell carrier / mobile provider. If using ESP8266 as a WiFi modem, this is your WiFi network password
*/
//#define MY_GSM_PSW
/**
* @def MY_GSM_RX
* @brief If defined, uses softSerial using defined pins (must also define MY_GSM_TX)
*/
//#define MY_GSM_RX
/**
* @def MY_GSM_SSID
* @brief If using ESP8266 as WiFi modem, this is your network SSID
*/
//#define MY_GSM_SSID
/**
* @def MY_GSM_TX
* @brief If defined, uses softSerial using defined pins (must also define MY_GSM_RX)
*/
//#define MY_GSM_TX
/**
* @def MY_GSM_USR
* @brief Supplied by your cell carrier / mobile operator. If not required, leave undefined.
*/
//#define MY_GSM_USR
/** @}*/ // End of GSMSettingGrpPub group
/**
* @defgroup LEDSettingGrpPub LED
* @ingroup MyConfigGrp
* @brief These options control LED specific configurations.
* @{
*/
/**
* @def MY_DEFAULT_ERR_LED_PIN
* @brief Define this with a value that correspond to your placement of the error indication LED.
*
* @note This is optional.
* @note On some platforms (for example sensebender GW) the hardware definitions can enable the LED
* by default. That default can be overridden by defining this flag.
*/
//#define MY_DEFAULT_ERR_LED_PIN (6)
/**
* @def MY_DEFAULT_TX_LED_PIN
* @brief Define this with a value that correspond to your placement of the TX indication LED.
*
* @note This is optional.
* @note On some platforms (for example sensebender GW) the hardware definitions can enable the LED
* by default. That default can be overridden by defining this flag.
*/
//#define MY_DEFAULT_TX_LED_PIN (7)
/**
* @def MY_DEFAULT_RX_LED_PIN
* @brief Define this with a value that correspond to your placement of the RX indication LED.
*
* @note This is optional.
* @note On some platforms (for example sensebender GW) the hardware definitions can enable the LED
* by default. That default can be overridden by defining this flag.
*/
//#define MY_DEFAULT_RX_LED_PIN (8)
/**
* @def MY_WITH_LEDS_BLINKING_INVERSE
* @brief Define this to inverse the LED blinking.
*
* When defined LEDs are normally turned on and switches off when blinking.
*/
//#define MY_WITH_LEDS_BLINKING_INVERSE
/**
* @def MY_INDICATION_HANDLER
* @brief Define to use own indication handler.
*/
//#define MY_INDICATION_HANDLER
/**
* @def MY_DEFAULT_LED_BLINK_PERIOD
* @brief Default LEDs blinking period in milliseconds.
*/
#ifndef MY_DEFAULT_LED_BLINK_PERIOD
#define MY_DEFAULT_LED_BLINK_PERIOD 300
#endif
/** @}*/ // End of LEDSettingGrpPub group
/**
* @defgroup SecuritySettingGrpPub Security
* @ingroup MyConfigGrp
* @brief These options control security related configurations.
*
* Overview over all security related settings and how/where to apply them:
* | Setting | Description | Arduino | Raspberry PI @c configure argument
* |--------------------------|-------------|---------|-------------
* | @ref MY_SECURITY_SIMPLE_PASSWD | Enables security (signing and encryption) without the need for @ref personalization | "#define" in the top of your sketch | Not supported (use the other two "simple" options)
* | @ref MY_SIGNING_SIMPLE_PASSWD | Enables signing without the need for @ref personalization | "#define" in the top of your sketch | @verbatim --my-signing=password --my-security-password=<PASSWORD> @endverbatim
* | @ref MY_ENCRYPTION_SIMPLE_PASSWD | Enables encryption without the need for @ref personalization | "#define" in the top of your sketch | @verbatim --my-security-password=<PASSWORD> @endverbatim and encryption enabled on the chosen transport
* | @ref MY_DEBUG_VERBOSE_SIGNING | Enables verbose signing debugging | "#define" in the top of your sketch | @verbatim --my-signing-debug @endverbatim
* | @ref MY_SIGNING_ATSHA204 | Enables support to sign messages backed by ATSHA204A hardware | "#define" in the top of your sketch | Not supported
* | @ref MY_SIGNING_SOFT | Enables support to sign messages backed by software | "#define" in the top of your sketch | @verbatim --my-signing=software @endverbatim
* | @ref MY_SIGNING_REQUEST_SIGNATURES | Enables node/gw to require signed messages | "#define" in the top of your sketch | @verbatim --my-signing-request-signatures @endverbatim
* | @ref MY_SIGNING_WEAK_SECURITY | Weakens signing security, useful for testing before deploying signing "globally" | "#define" in the top of your sketch | @verbatim --my-signing-weak_security @endverbatim
* | @ref MY_VERIFICATION_TIMEOUT_MS | Change default signing timeout | "#define" in the top of your sketch | @verbatim --my-signing-verification-timeout-ms=<TIMEOUT> @endverbatim
* | @ref MY_SIGNING_NODE_WHITELISTING | Defines a whitelist of trusted nodes | "#define" in the top of your sketch | @verbatim --my-signing-whitelist="<WHITELIST>" @endverbatim
* | @ref MY_SIGNING_ATSHA204_PIN | Change default ATSHA204A communication pin | "#define" in the top of your sketch | Not supported
* | @ref MY_SIGNING_SOFT_RANDOMSEED_PIN | Change default software RNG seed pin | "#define" in the top of your sketch | Not supported
* | @ref MY_RF24_ENABLE_ENCRYPTION | Enables encryption on RF24 radios | "#define" in the top of your sketch | @verbatim --my-rf24-encryption-enabled @endverbatim
* | @ref MY_RFM69_ENABLE_ENCRYPTION | Enables encryption on %RFM69 radios | "#define" in the top of your sketch | @verbatim --my-rfm69-encryption-enabled @endverbatim
* | @ref MY_RFM95_ENABLE_ENCRYPTION | Enables encryption on %RFM95 radios | "#define" in the top of your sketch | @verbatim --my-rfm95-encryption-enabled @endverbatim
* | @ref MY_NRF5_ESB_ENABLE_ENCRYPTION | Enables encryption on nRF5 radios | "#define" in the top of your sketch | Not supported
* | @ref MY_NODE_LOCK_FEATURE | Enables the node locking feature | "#define" in the top of your sketch | Not supported
* | @ref MY_NODE_UNLOCK_PIN | Change default unlock pin | "#define" in the top of your sketch | Not supported
* | @ref MY_NODE_LOCK_COUNTER_MAX | Change default "malicious activity" counter max value | "#define" in the top of your sketch | Not supported
*
* @{
*/
/**
* @def MY_SECURITY_SIMPLE_PASSWD
* @brief Enables SW backed signing functionality and encryption functionality in library and uses
* provided password as key.
*
* Example: @code #define MY_SECURITY_SIMPLE_PASSWD "MyInsecurePassword" @endcode
*
* For details on the effects, see the references.
* @see MY_SIGNING_SIMPLE_PASSWD, MY_ENCRYPTION_SIMPLE_PASSWD
*/
//#define MY_SECURITY_SIMPLE_PASSWD "MyInsecurePassword"
#if defined(MY_SECURITY_SIMPLE_PASSWD)
#define MY_SIGNING_SIMPLE_PASSWD MY_SECURITY_SIMPLE_PASSWD
#define MY_ENCRYPTION_SIMPLE_PASSWD MY_SECURITY_SIMPLE_PASSWD
#endif
/**
* @defgroup SigningSettingGrpPub Signing
* @ingroup SecuritySettingGrpPub
* @brief These options control signing related configurations.
*
* @see MySigninggrpPub
* @{
*/
/**
* @def MY_DEBUG_VERBOSE_SIGNING
* @brief Define this for verbose debug prints related to signing.
*/
//#define MY_DEBUG_VERBOSE_SIGNING
/**
* @def MY_SIGNING_SIMPLE_PASSWD
* @brief Enables SW backed signing functionality in library and uses provided password as key.
*
* This flag is automatically set if @ref MY_SECURITY_SIMPLE_PASSWD is used.
*
* This flag will enable signing and signature requests. It has to be identical on ALL nodes in the
* network.
*
* Whitelisting is supported and serial will be the first 8 characters of the password, the ninth
* character will be the node ID (to make each node have a unique serial).
*
* As with the regular signing modes, whitelisting is only activated if a whitelist is specified in
* the sketch.
*
* No @ref personalization is required for this mode.
*
* It is allowed to set @ref MY_SIGNING_WEAK_SECURITY for deployment purposes in this mode as it is
* with the regular software and ATSHA204A based modes.
*
* If the provided password is shorter than the size of the HMAC key, it will be null-padded
* to accommodate the key size in question. A 32 character password is the maximum length. Any
* password longer than that will be truncated.
*
* Example: @code #define MY_SIGNING_SIMPLE_PASSWD "MyInsecurePassword" @endcode
*
* @see MY_SECURITY_SIMPLE_PASSWD
*
*/
//#define MY_SIGNING_SIMPLE_PASSWD "MyInsecurePassword"
#if defined(MY_SIGNING_SIMPLE_PASSWD)
#define MY_SIGNING_SOFT
#define MY_SIGNING_REQUEST_SIGNATURES
#endif
/**
* @def MY_SIGNING_ATSHA204
* @brief Enables HW backed signing functionality in library.
*/
//#define MY_SIGNING_ATSHA204
/**
* @def MY_SIGNING_SOFT
* @brief Enables SW backed signing functionality in library.
*/
//#define MY_SIGNING_SOFT
/**
* @def MY_SIGNING_REQUEST_SIGNATURES
* @brief Enable this to inform gateway to sign all messages sent to this node.
*
* If used for a gateway, gateway will by default require signatures from ALL nodes. This behavior
* can be disabled by weakening security.
* @see MY_SIGNING_WEAK_SECURITY
*/
//#define MY_SIGNING_REQUEST_SIGNATURES
/**
* @def MY_SIGNING_WEAK_SECURITY
* @brief Enable this to permit downgrade of security preferences and relaxed gateway signing
* requirements.
*
* Use this for evaluating security. It allows for gradual introduction of signing requirements in
* a network. Nodes that present themselves as not requiring signing or whitelisting will be
* cleared of this requirement at the receiving end. A gateway which require signatures will only do
* so from nodes that in turn require signatures.
*
* When not set, any node that has presented themselves as a node that require signatures or
* whitelisting, will be permanently remembered as doing so at the receiver until EEPROM is cleared
* or the receiver is reconfigured with this flag set or has signing disabled alltogether.
*
* @warning This flag when set will weaken security significantly
*/
//#define MY_SIGNING_WEAK_SECURITY
/**
* @def MY_VERIFICATION_TIMEOUT_MS
* @brief Define a suitable timeout for a signature verification session
*
* Consider the turnaround from a nonce being generated to a signed message being received
* which might vary, especially in networks with many hops.
*
* Shorter time gives less time for an attacker to figure a way to hijack the nonce and attempt to
* brute force attack the node. Longer time permits more network hops and node or GW processing
* time. 5s ought to be enough for anyone.
*/
#ifndef MY_VERIFICATION_TIMEOUT_MS
#define MY_VERIFICATION_TIMEOUT_MS (5*1000ul)
#endif
/**
* @def MY_SIGNING_NODE_WHITELISTING
* @brief Define to turn on whitelisting
*
* When defined, a verifying node will look up the sender in the whitelist and salt the received
* signature with that information before validating the result. It will also inform GW (or other
* node) through the signing presentation message about this requirement.
*
* The signing node will check the presentaiton lists to determine if the recipient require
* whitelisting and salt the signature with it's unique signature and nodeId before transmitting
* the signed message.
*
* It is legal to only have one node with a whitelist for this reason but it is not required.
*
* Example: @code #define MY_SIGNING_NODE_WHITELISTING {{.nodeId = GATEWAY_ADDRESS,.serial = {0x09,0x08,0x07,0x06,0x05,0x04,0x03,0x02,0x01}}} @endcode
*/
//#define MY_SIGNING_NODE_WHITELISTING {{.nodeId = GATEWAY_ADDRESS,.serial = {0x09,0x08,0x07,0x06,0x05,0x04,0x03,0x02,0x01}}}
/**
* @def MY_SIGNING_ATSHA204_PIN
* @brief Atsha204a default pin setting. Set it to match the pin the device is attached to.
*/
#ifndef MY_SIGNING_ATSHA204_PIN
#define MY_SIGNING_ATSHA204_PIN (17)
#endif
/**
* @def MY_SIGNING_SOFT_RANDOMSEED_PIN
* @brief Pin used for random seed generation in soft signing
* @note Do not connect anything to this when soft signing is enabled, or the seed will be
* predictable.
*/
#ifndef MY_SIGNING_SOFT_RANDOMSEED_PIN
#define MY_SIGNING_SOFT_RANDOMSEED_PIN (7)
#endif
/**
* @def MY_LOCK_DEVICE
* @brief Enable read back protection
*
* Enable read back protection feature. Currently only supported by NRF51+NRF52.
* Use this flag to protect signing and encryption keys stored in the MCU.
*
* Set this flag, when you use softsigning in MySensors. Don't set this
* in SecurityPersonalizer.
*
* @warning YOU CAN BRICK YOUR DEVICE!!!
* Don't set this flag without having an boot loader, OTA firmware update and
* an Gateway connection. To reset an device, you can try >>
* openocd -f interface/cmsis-dap.cfg -f target/nrf52.cfg -c "program dap apreg 1 0x04 0x01"
*/
//#define MY_LOCK_DEVICE
/**
* @def MY_SIGNING_FEATURE
* @ingroup internals
* @brief Helper flag to indicate that some signing feature is enabled, set automatically
*/
#if defined(MY_SIGNING_ATSHA204) || defined(MY_SIGNING_SOFT)
#define MY_SIGNING_FEATURE
#endif
/** @}*/ // End of SigningSettingGrpPub group
/**
* @defgroup EncryptionSettingGrpPub Encryption
* @ingroup SecuritySettingGrpPub
* @brief These options control encryption related configurations.
*
* Note that encryption is toggled on a per-radio basis.
* @see MY_RF24_ENABLE_ENCRYPTION, MY_RFM69_ENABLE_ENCRYPTION, MY_NRF5_ESB_ENABLE_ENCRYPTION, MY_RFM95_ENABLE_ENCRYPTION
* @{
*/
/**
* @def MY_ENCRYPTION_SIMPLE_PASSWD
* @brief Enables encryption on all radio transports that supports it and uses provided password as key.
*
* This flag is automatically set if @ref MY_SECURITY_SIMPLE_PASSWD is used.
*
* This flag will enable encryption. It has to be identical on ALL nodes in the network.
*
* No @ref personalization is required for this mode.
*
* If the provided password is shorter than the size of the %AES key, it will be null-padded
* to accommodate the key size in question. A 16 character password is the maximum length. Any
* password longer than that will be truncated.
*
* Example: @code #define MY_ENCRYPTION_SIMPLE_PASSWD "MyInsecurePassword" @endcode
*
* @see MY_SECURITY_SIMPLE_PASSWD
*/
//#define MY_ENCRYPTION_SIMPLE_PASSWD "MyInsecurePassword"
#if defined(MY_ENCRYPTION_SIMPLE_PASSWD)
#ifndef MY_RF24_ENABLE_ENCRYPTION
#define MY_RF24_ENABLE_ENCRYPTION
#endif
#ifndef MY_RFM69_ENABLE_ENCRYPTION
#define MY_RFM69_ENABLE_ENCRYPTION
#endif
#ifndef MY_NRF5_ESB_ENABLE_ENCRYPTION
#define MY_NRF5_ESB_ENABLE_ENCRYPTION
#endif
#ifndef MY_RFM95_ENABLE_ENCRYPTION
#define MY_RFM95_ENABLE_ENCRYPTION
#endif
#endif
/**
* @def MY_ENCRYPTION_FEATURE
* @ingroup internals
* @brief Helper flag to indicate that some encryption feature is enabled, set automatically
* @see MY_RF24_ENABLE_ENCRYPTION, MY_RFM69_ENABLE_ENCRYPTION, MY_NRF5_ESB_ENABLE_ENCRYPTION, MY_RFM95_ENABLE_ENCRYPTION
*/
#if defined(MY_RF24_ENABLE_ENCRYPTION) || defined(MY_RFM69_ENABLE_ENCRYPTION) || defined(MY_NRF5_ESB_ENABLE_ENCRYPTION) || defined(MY_RFM95_ENABLE_ENCRYPTION)
#define MY_ENCRYPTION_FEATURE
#endif
/** @}*/ // End of EncryptionSettingGrpPub group
/**
* @defgroup MyLockgrppub Node locking
* @ingroup MyConfig
* @brief These options control node lock related configurations.
*
* This feature locks a node that suspect itself for being under some form of attack.
*
* This is achieved by having a counter stored in EEPROM which decrements when suspicious activity
* is detected.
*
* If the counter reaches 0, the node will not work anymore and will transmit a @ref I_LOCKED
* message to the gateway/controller with 30 minute intervals. Payload is a string with a reason for
* the locking.
*
* The string is abbreviated to accommodate a signature. The following abbreviations exist at the
* moment:
* - LDB (Locked During Boot)
* - TMNR (Too Many Nonce Requests)
* - TMFV (Too Many Failed Verifications)
*
* Typically, the counter only decrements when suspicious activity happens in a row.
* It is reset if legit traffic is present.
*
* Examples of malicious activity are:
* - Repeatedly incorrectly checksummed OTA firmware
* - Repeated requests for signing nonces without properly signed messages arriving
* - Repeatedly failed signature verifications
*
* If counter reaches zero, node locks down and EEPROM has to be erased/reset to reactivate node.
* Node can also be unlocked by grounding a pin.
* @see MY_NODE_UNLOCK_PIN
*
* The size of the counter can be adjusted using @ref MY_NODE_LOCK_COUNTER_MAX.
* @{
*/
/**
* @def MY_NODE_LOCK_FEATURE
* @brief Enable this to activate intrusion prevention mechanisms on the node.
*/
//#define MY_NODE_LOCK_FEATURE
/**
* @def MY_NODE_UNLOCK_PIN
* @brief By grounding this pin during reset of a locked node, the node will unlock.
*
* If using a secure bootloader, grounding the pin is the only option to reactivate the node.
* If using stock Android bootloader or a DualOptiBoot it is also possible to download a sketch
* using serial protocol to erase EEPROM to unlock the node.
*/
#ifndef MY_NODE_UNLOCK_PIN
#define MY_NODE_UNLOCK_PIN (14)
#endif
/**
* @def MY_NODE_LOCK_COUNTER_MAX
* @brief Maximum accepted occurrences of suspected malicious activity in a node.
*
* Counter decrements on reoccurring incidents but resets if legitimate behaviour is identified.
*/
#ifndef MY_NODE_LOCK_COUNTER_MAX
#define MY_NODE_LOCK_COUNTER_MAX (5)
#endif
/** @}*/ // Node lock group
/** @}*/ // End of SecuritySettingGrpPub group
/**
* @defgroup PlatformSettingGrpPub Platform specifics
* @ingroup MyConfigGrp
* @brief These options control platform specific configurations.
* @{
*/
/**
* @defgroup ESP8266SettingGrpPub ESP8266
* @ingroup PlatformSettingGrpPub
* @brief These options control ESP8266 specific configurations.
* @{
*/
/**
* @def MY_ESP8266_SERIAL_MODE
* @brief ESP8266 serial modes
*
* - SERIAL_FULL: Default mode.
* - SERIAL_TX_ONLY: allows to use RX (GPIO3) as a general purpose input/output.
* - SERIAL_RX_ONLY: allows to use TX (GPIO1) as a general purpose input/output.
*/
#ifndef MY_ESP8266_SERIAL_MODE
#define MY_ESP8266_SERIAL_MODE SERIAL_FULL
#endif
/** @}*/ // End of ESP8266SettingGrpPub group
/**
* @defgroup ESP32SettingGrpPub ESP32
* @ingroup PlatformSettingGrpPub
* @brief These options control ESP32 specific configurations.
* @{
*/
//
// no ESP32 settings
//
/** @}*/ // End of ESP32SettingGrpPub group
/**
* @defgroup LinuxSettingGrpPub Linux
* @ingroup PlatformSettingGrpPub
* @brief These options control Linux specific configurations.
* @{
*/
/**
* @def MY_LINUX_SERIAL_PORT
* @brief Serial device port
*/
//#define MY_LINUX_SERIAL_PORT "/dev/ttyUSB0"
/**
* @def MY_LINUX_SERIAL_PTY
* @brief deprecated option
*/
#ifdef MY_LINUX_SERIAL_PTY
#warning MY_LINUX_SERIAL_PTY is deprecated, please use MY_LINUX_SERIAL_PORT
#define MY_LINUX_SERIAL_PORT MY_LINUX_SERIAL_PTY
#endif
/**
* @def MY_LINUX_IS_SERIAL_PTY
* @brief deprecated option
*/
#ifdef MY_LINUX_IS_SERIAL_PTY
#warning MY_LINUX_IS_SERIAL_PTY is deprecated, please use MY_LINUX_SERIAL_IS_PTY
#define MY_LINUX_SERIAL_IS_PTY
#endif
/**
* @def MY_LINUX_SERIAL_IS_PTY
* @brief Set serial as a pseudo terminal.
*
* Enable this if you need to connect to a controller running on the same device.
* You also need to define MY_LINUX_SERIAL_PORT with the symlink name for the PTY device.
*/
//#define MY_LINUX_SERIAL_IS_PTY
/**
* @def MY_LINUX_SERIAL_GROUPNAME
* @brief Grant access to the specified system group for the serial device.
*/
//#define MY_LINUX_SERIAL_GROUPNAME "tty"
/**
* @def MY_LINUX_CONFIG_FILE
* @brief Sets the filepath for the gateway config file.
*
* @note For now the configuration file is only used to store the emulated eeprom state.
*/
#ifndef MY_LINUX_CONFIG_FILE
#define MY_LINUX_CONFIG_FILE "/etc/mysensors.conf"
#endif
/** @}*/ // End of LinuxSettingGrpPub group
/** @}*/ // End of PlatformSettingGrpPub group
/*
* "Helper" definitions
*/
/*
* Detect node type
* MY_GATEWAY_FEATURE is set for gateway sketches.
* MY_IS_GATEWAY is true when @ref MY_GATEWAY_FEATURE is set.
* MY_NODE_TYPE contain a string describing the class of sketch/node (gateway/repeater/node).
*/
#if defined(MY_GATEWAY_SERIAL) || defined(MY_GATEWAY_W5100) || defined(MY_GATEWAY_ENC28J60) || defined(MY_GATEWAY_ESP8266) || defined(MY_GATEWAY_ESP32)|| defined(MY_GATEWAY_LINUX) || defined(MY_GATEWAY_MQTT_CLIENT) || defined(MY_GATEWAY_TINYGSM)
#define MY_GATEWAY_FEATURE
#define MY_IS_GATEWAY (true)
#define MY_NODE_TYPE "GW"
#elif defined(MY_REPEATER_FEATURE)
#define MY_IS_GATEWAY (false)
#define MY_NODE_TYPE "REPEATER"
#elif defined(DOXYGEN)
#define MY_IS_GATEWAY //!< true when configuration indicate a gateway device, @todo Mark these internals
#define MY_NODE_TYPE //!< "GW" for gateways, REPEATER" for repeaters, "NODE" for nodes, @todo Mark these internals
#else
#define MY_IS_GATEWAY (false)
#define MY_NODE_TYPE "NODE"
#endif
// DEBUG
#if defined(MY_DISABLED_SERIAL) && !defined(MY_DEBUG_OTA)
#undef MY_DEBUG
#endif
#if defined(MY_DEBUG)
// standard debug output
#define MY_DEBUG_VERBOSE_CORE //!< MY_DEBUG_VERBOSE_CORE
#define MY_DEBUG_VERBOSE_TRANSPORT //!< MY_DEBUG_VERBOSE_TRANSPORT
#define MY_DEBUG_VERBOSE_GATEWAY //!< MY_DEBUG_VERBOSE_GATEWAY
#define MY_DEBUG_VERBOSE_OTA_UPDATE //!< MY_DEBUG_VERBOSE_OTA_UPDATE
#endif
#if defined(MY_DEBUG) || defined(MY_DEBUG_VERBOSE_CORE) || defined(MY_DEBUG_VERBOSE_TRANSPORT) || defined(MY_DEBUG_VERBOSE_GATEWAY) || defined(MY_DEBUG_VERBOSE_SIGNING) || defined(MY_DEBUG_VERBOSE_OTA_UPDATE) || defined(MY_DEBUG_VERBOSE_RF24) || defined(MY_DEBUG_VERBOSE_NRF5_ESB) || defined(MY_DEBUG_VERBOSE_RFM69) || defined(MY_DEBUG_VERBOSE_RFM95) || defined(MY_DEBUG_VERBOSE_SX126x) || defined(MY_DEBUG_VERBOSE_TRANSPORT_HAL)
#define DEBUG_OUTPUT_ENABLED //!< DEBUG_OUTPUT_ENABLED
#ifndef MY_DEBUG_OTA
#define DEBUG_OUTPUT(x,...) hwDebugPrint(x, ##__VA_ARGS__) //!< debug
#else
#ifndef MY_OTA_LOG_SENDER_FEATURE
#define MY_OTA_LOG_SENDER_FEATURE
#endif
#ifndef MY_DEBUG_OTA_DISABLE_ECHO
#define DEBUG_OUTPUT(x,...) OTALog((MY_DEBUG_OTA), true, x, ##__VA_ARGS__) //!< debug
#else
#define DEBUG_OUTPUT(x,...) OTALog((MY_DEBUG_OTA), false, x, ##__VA_ARGS__) //!< debug
#endif
// disable radio related debugging messages
#undef MY_DEBUG_VERBOSE_RF24
#undef MY_DEBUG_VERBOSE_NRF5_ESB
#undef MY_DEBUG_VERBOSE_RFM69
#undef MY_DEBUG_VERBOSE_RFM69_REGISTERS
#undef MY_DEBUG_VERBOSE_RFM95
#undef MY_DEBUG_VERBOSE_SX126x
#endif
#else
#define DEBUG_OUTPUT(x,...) //!< debug NULL
#endif
// temp. workaround for nRF5 verifier: redirect RF24 to NRF_ESB
#if defined(ARDUINO_ARCH_NRF5) && (defined(MY_RADIO_RF24) )
#undef MY_RADIO_RF24
#define MY_RADIO_NRF5_ESB
#endif
// Enable sensor network "feature" if one of the transport types was enabled
#if defined(MY_RADIO_RF24) || defined(MY_RADIO_NRF5_ESB) || defined(MY_RADIO_RFM69) || defined(MY_RADIO_RFM95) || defined(MY_RADIO_SX126x) || defined(MY_RS485) || defined(MY_PJON)
#define MY_SENSOR_NETWORK
#endif
// LEDS
#if !defined(MY_DEFAULT_ERR_LED_PIN) && defined(MY_HW_ERR_LED_PIN)
#define MY_DEFAULT_ERR_LED_PIN MY_HW_ERR_LED_PIN
#endif
#if !defined(MY_DEFAULT_TX_LED_PIN) && defined(MY_HW_TX_LED_PIN)
#define MY_DEFAULT_TX_LED_PIN MY_HW_TX_LED_PIN
#endif
#if !defined(MY_DEFAULT_RX_LED_PIN) && defined(MY_HW_TX_LED_PIN)
#define MY_DEFAULT_RX_LED_PIN MY_HW_TX_LED_PIN
#endif
#endif // MyConfig_h
// Doxygen specific constructs, not included when built normally
// This is used to enable disabled macros/definitions to be included in the documentation as well.
#if DOXYGEN
/**
* @def ARDUINO_ARCH_SAMD
* @brief Automatically set when building for SAMD targets
*/
#define ARDUINO_ARCH_SAMD
/**
* @def ARDUINO_ARCH_NRF5
* @brief Automatically set when building for nRF5 targets
*/
#define ARDUINO_ARCH_NRF5
/**
* @def ARDUINO_ARCH_ESP8266
* @brief Automatically set when building for ESP8266 targets
*/
#define ARDUINO_ARCH_ESP8266
/**
* @def ARDUINO_ARCH_ESP32
* @brief Automatically set when building for ESP32 targets
*/
#define ARDUINO_ARCH_ESP32
/**
* @def ARDUINO_ARCH_AVR
* @brief Automatically set when building for AVR targets
*/
#define ARDUINO_ARCH_AVR
/**
* @def ARDUINO_ARCH_MEGAAVR
* @brief Automatically set when building for megaAVR targets
*/
#define ARDUINO_ARCH_MEGAAVR
/**
* @def ARDUINO_ARCH_STM32
* @brief Automatically set when building for STM32 targets
*/
#define ARDUINO_ARCH_STM32
/**
* @def TEENSYDUINO
* @brief Automatically set when building for Teensy targets
*/
#define TEENSYDUINO
// debug
#define MY_DEBUG
#define MY_DEBUGDEVICE
#define MY_DEBUG_OTA
#define MY_DEBUG_OTA_DISABLE_ECHO
#define MY_SPECIAL_DEBUG
#define MY_DISABLED_SERIAL
#define MY_SPLASH_SCREEN_DISABLED
#define MY_DIAGNOSTICS
#define MY_DIAGNOSTICS_CRYPTO
// linux
#define MY_LINUX_SERIAL_PORT
#define MY_LINUX_SERIAL_IS_PTY
#define MY_LINUX_SERIAL_GROUPNAME
#define MY_LINUX_SERIAL_PTY
#define MY_LINUX_IS_SERIAL_PTY
// inclusion mode
#define MY_INCLUSION_MODE_FEATURE
#define MY_INCLUSION_BUTTON_FEATURE
// OTA logging and debug
#define MY_OTA_LOG_RECEIVER_FEATURE
#define MY_OTA_LOG_SENDER_FEATURE
// transport
#define MY_PARENT_NODE_IS_STATIC
#define MY_REGISTRATION_CONTROLLER
#define MY_TRANSPORT_UPLINK_CHECK_DISABLED
#define MY_TRANSPORT_SANITY_CHECK
#define MY_NODE_LOCK_FEATURE
#define MY_REPEATER_FEATURE
#define MY_PASSIVE_NODE
#define MY_MQTT_CLIENT_PUBLISH_RETAIN
#define MY_MQTT_PASSWORD
#define MY_MQTT_USER
#define MY_MQTT_CLIENT_ID
#define MY_MQTT_PUBLISH_TOPIC_PREFIX
#define MY_MQTT_SUBSCRIBE_TOPIC_PREFIX
#define MY_MQTT_CA_CERT1
#define MY_MQTT_CA_CERT2
#define MY_MQTT_CA_CERT3
#define MY_MQTT_FINGERPRINT
#define MY_MQTT_CLIENT_CERT
#define MY_MQTT_CLIENT_KEY
#define MY_SIGNAL_REPORT_ENABLED
// general
#define MY_WITH_LEDS_BLINKING_INVERSE
#define MY_INDICATION_HANDLER
#define MY_DISABLE_REMOTE_RESET
#define MY_DISABLE_RAM_ROUTING_TABLE_FEATURE
#define MY_LOCK_DEVICE
#define MY_SLEEP_HANDLER
// core
#define MY_CORE_ONLY
// GW
#define MY_DEBUG_VERBOSE_GATEWAY
#define MY_INCLUSION_BUTTON_EXTERNAL_PULLUP
#define MY_INCLUSION_LED_PIN
#define MY_GATEWAY_W5100
#define MY_GATEWAY_ENC28J60
#define MY_GATEWAY_ESP8266
#define MY_GATEWAY_ESP32
#define MY_WIFI_SSID
#define MY_WIFI_BSSID
#define MY_WIFI_PASSWORD
#define MY_GATEWAY_LINUX
#define MY_GATEWAY_TINYGSM
#define MY_GATEWAY_MQTT_CLIENT
#define MY_GATEWAY_SERIAL
#define MY_IP_ADDRESS
#define MY_IP_GATEWAY_ADDRESS
#define MY_IP_SUBNET_ADDRESS
#define MY_USE_UDP
#define MY_CONTROLLER_IP_ADDRESS
#define MY_CONTROLLER_URL_ADDRESS
// TinyGSM
#define MY_GSM_APN
#define MY_GSM_BAUDRATE
#define MY_GSM_PIN
#define MY_GSM_PSW
#define MY_GSM_RX
#define MY_GSM_SSID
#define MY_GSM_TX
#define MY_GSM_USR
// LED
#define MY_DEFAULT_ERR_LED_PIN
#define MY_DEFAULT_TX_LED_PIN
#define MY_DEFAULT_RX_LED_PIN
// signing
#define MY_SECURITY_SIMPLE_PASSWD
#define MY_SIGNING_SIMPLE_PASSWD
#define MY_ENCRYPTION_SIMPLE_PASSWD
#define MY_SIGNING_ATSHA204
#define MY_SIGNING_SOFT
#define MY_SIGNING_REQUEST_SIGNATURES
#define MY_SIGNING_WEAK_SECURITY
#define MY_SIGNING_NODE_WHITELISTING
#define MY_DEBUG_VERBOSE_SIGNING
#define MY_SIGNING_FEATURE
#define MY_ENCRYPTION_FEATURE
// FOTA update
#define MY_DEBUG_VERBOSE_OTA_UPDATE
#define MY_OTA_USE_I2C_EEPROM
// RS485
#define MY_RS485
#define MY_RS485_DE_PIN
#define MY_RS485_DE_INVERSE
#define MY_RS485_HWSERIAL
// PJON
#define MY_PJON
#define MY_DEBUG_VERBOSE_PJON
// RF24
#define MY_RADIO_RF24
#define MY_RADIO_NRF24 //deprecated
#define MY_DEBUG_VERBOSE_RF24
#define MY_RF24_POWER_PIN
#define MY_RF24_IRQ_PIN
#define MY_RF24_ENABLE_ENCRYPTION
#define MY_RX_MESSAGE_BUFFER_FEATURE
#define MY_RX_MESSAGE_BUFFER_SIZE
// NRF5_ESB
#define MY_RADIO_NRF5_ESB
#define MY_NRF5_ESB_ENABLE_ENCRYPTION
#define MY_DEBUG_VERBOSE_NRF5_ESB
#define MY_NRF5_ESB_REVERSE_ACK_RX
#define MY_NRF5_ESB_REVERSE_ACK_TX
// RFM69
#define MY_RADIO_RFM69
#define MY_IS_RFM69HW
#define MY_RFM69_NEW_DRIVER
#define MY_RFM69_POWER_PIN
#define MY_RFM69_MODEM_CONFIGURATION
#define MY_RFM69_ENABLE_ENCRYPTION
#define MY_RFM69_ATC_MODE_DISABLED
#define MY_RFM69_MAX_POWER_LEVEL_DBM
#define MY_RFM69_RST_PIN
#define MY_DEBUG_VERBOSE_RFM69
#define MY_DEBUG_VERBOSE_RFM69_REGISTERS
// RFM95
#define MY_RADIO_RFM95
#define MY_DEBUG_VERBOSE_RFM95
#define MY_RFM95_ENABLE_ENCRYPTION
#define MY_RFM95_ATC_MODE_DISABLED
#define MY_RFM95_RST_PIN
#define MY_RFM95_MODEM_CONFIGRUATION
#define MY_RFM95_POWER_PIN
#define MY_RFM95_TCXO
#define MY_RFM95_MAX_POWER_LEVEL_DBM
// SX126x
#define MY_RADIO_SX126x
#define MY_SX126x_TCXO_VOLTAGE
#define MY_SX126c_TCXO_STARTUP_DELAY
#define MY_SX126x_USE_TCXO
#define MY_SX126x_USE_DIO2_ANT_SWITCH
#define MY_SX126x_ANT_SWITCH_PIN
#define MY_SX126x_POWER_PIN
#define MY_SX126x_RESET_PIN
#define MY_SX126x_BUSY_PIN
#define MY_SX126x_DISABLE_ATC
#define MY_SX126x_MIN_POWER_LEVEL_DBM
#define MY_SX126x_MAX_POWER_LEVEL_DBM
// SOFT-SPI
#define MY_SOFTSPI
/**
* @def MY_ROUTES_SIZE
* @brief Specifies the size allocated for routing table
*/
#define MY_ROUTES_SIZE
#endif
/** @}*/ // End of MyConfig group
Reference in New Issue View Git Blame Copy Permalink