[cron] Bump distribution date (2025-05-27)

🔨 Update Simulator build
[cron] Bump distribution date (2023-04-16)
2026-03-06 15:27:09 +01:00 · 2025-05-27 00:35:09 +00:00 · 2025-05-26 13:35:07 -05:00 · 2023-04-16 06:07:32 +00:00 · 2023-04-15 22:27:40 -05:00 · 2023-04-15 22:27:40 -05:00
35 changed files with 497 additions and 386 deletions
--- a/.github/workflows/test-builds.yml
+++ b/.github/workflows/test-builds.yml
@@ -0,0 +1,147 @@
+#
+# test-builds.yml
+# Do test builds to catch compile errors
+#
+
+name: CI - bugfix-2.0.x
+
+on:
+  pull_request:
+    branches:
+    - bugfix-2.0.x
+    paths-ignore:
+    - config/**
+    - data/**
+    - docs/**
+    - '**/*.md'
+  push:
+    branches:
+    - bugfix-2.0.x
+    paths-ignore:
+    - config/**
+    - data/**
+    - docs/**
+    - '**/*.md'
+
+jobs:
+  test_builds:
+    name: Run All Tests
+    if: github.repository == 'MarlinFirmware/Marlin'
+
+    runs-on: ubuntu-latest
+
+    strategy:
+      matrix:
+        test-platform:
+        # Base Environments
+
+        - DUE
+        - DUE_archim
+        - esp32
+        - linux_native
+        - mega2560
+        - at90usb1286_dfu
+        - teensy31
+        - teensy35
+        - teensy41
+        - SAMD51_grandcentral_m4
+
+        # Extended AVR Environments
+
+        - FYSETC_F6
+        - mega1280
+        - rambo
+        - sanguino1284p
+        - sanguino644p
+
+        # STM32F1 (Maple) Environments
+
+        #- STM32F103RC_btt_maple
+        - STM32F103RC_btt_USB_maple
+        - STM32F103RC_fysetc_maple
+        - STM32F103RC_meeb_maple
+        - jgaurora_a5s_a1_maple
+        - STM32F103VE_longer_maple
+        #- mks_robin_maple
+        - mks_robin_lite_maple
+        - mks_robin_pro_maple
+        #- mks_robin_nano35_maple
+        #- STM32F103RE_creality_maple
+        - STM32F103VE_ZM3E4V2_USB_maple
+
+        # STM32 (ST) Environments
+
+        - STM32F103RC_btt
+        #- STM32F103RC_btt_USB
+        - STM32F103RE_btt
+        - STM32F103RE_btt_USB
+        - STM32F103RE_creality
+        - STM32F401RC_creality
+        - STM32F103VE_longer
+        - STM32F407VE_black
+        - STM32F401VE_STEVAL
+        - BIGTREE_BTT002
+        - BIGTREE_SKR_PRO
+        - BIGTREE_GTR_V1_0
+        - mks_robin
+        - ARMED
+        - FYSETC_S6
+        - STM32F070CB_malyan
+        - STM32F070RB_malyan
+        - malyan_M300
+        - FLYF407ZG
+        - rumba32
+        - LERDGEX
+        - LERDGEK
+        - mks_robin_nano35
+        - NUCLEO_F767ZI
+        - REMRAM_V1
+        - BTT_SKR_SE_BX
+        - chitu_f103
+        - Opulo_Lumen_REV3
+
+        # Put lengthy tests last
+
+        - LPC1768
+        - LPC1769
+
+        # Non-working environment tests
+        #- at90usb1286_cdc
+        #- STM32F103CB_malyan
+        #- STM32F103RE
+        #- mks_robin_mini
+
+    steps:
+
+    - name: Check out the PR
+      uses: actions/checkout@v3
+
+    - name: Cache pip
+      uses: actions/cache@v3
+      with:
+        path: ~/.cache/pip
+        key: ${{ runner.os }}-pip-${{ hashFiles('**/requirements.txt') }}
+        restore-keys: |
+          ${{ runner.os }}-pip-
+
+    - name: Cache PlatformIO
+      uses: actions/cache@v3
+      with:
+        path: ~/.platformio
+        key: ${{ runner.os }}-${{ hashFiles('**/lockfiles') }}
+
+    - name: Select Python 3.7
+      uses: actions/setup-python@v3
+      with:
+        python-version: '3.7' # Version range or exact version of a Python version to use, using semvers version range syntax.
+        architecture: 'x64' # optional x64 or x86. Defaults to x64 if not specified
+
+    - name: Install PlatformIO
+      run: |
+        pip install -U platformio
+        pio upgrade --dev
+        pio pkg update --global
+
+    - name: Run ${{ matrix.test-platform }} Tests
+      run: |
+        make tests-single-ci TEST_TARGET=${{ matrix.test-platform }}
--- a/Marlin/Version.h
+++ b/Marlin/Version.h
@@ -28,7 +28,7 @@
 /**
 * Marlin release version identifier
 */
-//#define SHORT_BUILD_VERSION "2.0.9.9"
+//#define SHORT_BUILD_VERSION "bugfix-2.0.x"

 /**
 * Verbose version identifier which should contain a reference to the location
@@ -41,7 +41,7 @@
 * here we define this default string as the date where the latest release
 * version was tagged.
 */
-//#define STRING_DISTRIBUTION_DATE "2025-11-13"
+//#define STRING_DISTRIBUTION_DATE "2025-05-27"

 /**
 * Defines a generic printer name to be output to the LCD after booting Marlin.
--- a/Marlin/src/HAL/AVR/timers.h
+++ b/Marlin/src/HAL/AVR/timers.h
@@ -109,8 +109,8 @@ FORCE_INLINE void HAL_timer_start(const uint8_t timer_num, const uint32_t) {
 * (otherwise, characters will be lost due to UART overflow).
 * Then: Stepper, Endstops, Temperature, and -finally- all others.
 */
-inline void HAL_timer_isr_prologue(const uint8_t) {}
-inline void HAL_timer_isr_epilogue(const uint8_t) {}
+#define HAL_timer_isr_prologue(T) NOOP
+#define HAL_timer_isr_epilogue(T) NOOP

 #ifndef HAL_STEP_TIMER_ISR

--- a/Marlin/src/HAL/DUE/timers.h
+++ b/Marlin/src/HAL/DUE/timers.h
@@ -126,4 +126,4 @@ FORCE_INLINE static void HAL_timer_isr_prologue(const uint8_t timer_num) {
  pConfig->pTimerRegs->TC_CHANNEL[pConfig->channel].TC_SR;
 }

-inline void HAL_timer_isr_epilogue(const uint8_t) {}
+#define HAL_timer_isr_epilogue(T) NOOP
--- a/Marlin/src/HAL/ESP32/timers.h
+++ b/Marlin/src/HAL/ESP32/timers.h
@@ -136,5 +136,5 @@ void HAL_timer_enable_interrupt(const uint8_t timer_num);
 void HAL_timer_disable_interrupt(const uint8_t timer_num);
 bool HAL_timer_interrupt_enabled(const uint8_t timer_num);

-inline void HAL_timer_isr_prologue(const uint8_t) {}
-inline void HAL_timer_isr_epilogue(const uint8_t) {}
+#define HAL_timer_isr_prologue(T) NOOP
+#define HAL_timer_isr_epilogue(T) NOOP
--- a/Marlin/src/HAL/LINUX/timers.h
+++ b/Marlin/src/HAL/LINUX/timers.h
@@ -92,5 +92,5 @@ void HAL_timer_enable_interrupt(const uint8_t timer_num);
 void HAL_timer_disable_interrupt(const uint8_t timer_num);
 bool HAL_timer_interrupt_enabled(const uint8_t timer_num);

-inline void HAL_timer_isr_prologue(const uint8_t) {}
-inline void HAL_timer_isr_epilogue(const uint8_t) {}
+#define HAL_timer_isr_prologue(T) NOOP
+#define HAL_timer_isr_epilogue(T) NOOP
--- a/Marlin/src/HAL/LPC1768/timers.h
+++ b/Marlin/src/HAL/LPC1768/timers.h
@@ -170,4 +170,4 @@ FORCE_INLINE static void HAL_timer_isr_prologue(const uint8_t timer_num) {
  }
 }

-inline void HAL_timer_isr_epilogue(const uint8_t) {}
+#define HAL_timer_isr_epilogue(T) NOOP
--- a/Marlin/src/HAL/NATIVE_SIM/timers.h
+++ b/Marlin/src/HAL/NATIVE_SIM/timers.h
@@ -87,5 +87,5 @@ void HAL_timer_enable_interrupt(const uint8_t timer_num);
 void HAL_timer_disable_interrupt(const uint8_t timer_num);
 bool HAL_timer_interrupt_enabled(const uint8_t timer_num);

-inline void HAL_timer_isr_prologue(const uint8_t) {}
-inline void HAL_timer_isr_epilogue(const uint8_t) {}
+#define HAL_timer_isr_prologue(T) NOOP
+#define HAL_timer_isr_epilogue(T) NOOP
--- a/Marlin/src/HAL/SAMD51/timers.h
+++ b/Marlin/src/HAL/SAMD51/timers.h
@@ -140,4 +140,4 @@ FORCE_INLINE static void HAL_timer_isr_prologue(const uint8_t timer_num) {
  }
 }

-inline void HAL_timer_isr_epilogue(const uint8_t) {}
+#define HAL_timer_isr_epilogue(timer_num)
--- a/Marlin/src/HAL/STM32/timers.h
+++ b/Marlin/src/HAL/STM32/timers.h
@@ -116,5 +116,5 @@ FORCE_INLINE static void HAL_timer_set_compare(const uint8_t timer_num, const ha
  }
 }

-inline void HAL_timer_isr_prologue(const uint8_t) {}
-inline void HAL_timer_isr_epilogue(const uint8_t) {}
+#define HAL_timer_isr_prologue(T) NOOP
+#define HAL_timer_isr_epilogue(T) NOOP
--- a/Marlin/src/HAL/STM32F1/timers.h
+++ b/Marlin/src/HAL/STM32F1/timers.h
@@ -188,7 +188,7 @@ FORCE_INLINE static void HAL_timer_isr_prologue(const uint8_t timer_num) {
  }
 }

-inline void HAL_timer_isr_epilogue(const uint8_t) {}
+#define HAL_timer_isr_epilogue(T) NOOP

 // No command is available in framework to turn off ARPE bit, which is turned on by default in libmaple.
 // Needed here to reset ARPE=0 for stepper timer
--- a/Marlin/src/HAL/TEENSY31_32/timers.h
+++ b/Marlin/src/HAL/TEENSY31_32/timers.h
@@ -74,10 +74,10 @@ typedef uint32_t hal_timer_t;
 #define DISABLE_TEMPERATURE_INTERRUPT() HAL_timer_disable_interrupt(MF_TIMER_TEMP)

 #ifndef HAL_STEP_TIMER_ISR
-  #define HAL_STEP_TIMER_ISR() extern "C" void ftm0_isr()
+  #define HAL_STEP_TIMER_ISR() extern "C" void ftm0_isr() //void TC3_Handler()
 #endif
 #ifndef HAL_TEMP_TIMER_ISR
-  #define HAL_TEMP_TIMER_ISR() extern "C" void ftm1_isr()
+  #define HAL_TEMP_TIMER_ISR() extern "C" void ftm1_isr() //void TC4_Handler()
 #endif

 void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency);
@@ -110,4 +110,4 @@ void HAL_timer_disable_interrupt(const uint8_t timer_num);
 bool HAL_timer_interrupt_enabled(const uint8_t timer_num);

 void HAL_timer_isr_prologue(const uint8_t timer_num);
-inline void HAL_timer_isr_epilogue(const uint8_t) {}
+#define HAL_timer_isr_epilogue(T) NOOP
--- a/Marlin/src/HAL/TEENSY35_36/timers.h
+++ b/Marlin/src/HAL/TEENSY35_36/timers.h
@@ -109,4 +109,4 @@ void HAL_timer_disable_interrupt(const uint8_t timer_num);
 bool HAL_timer_interrupt_enabled(const uint8_t timer_num);

 void HAL_timer_isr_prologue(const uint8_t timer_num);
-inline void HAL_timer_isr_epilogue(const uint8_t) {}
+#define HAL_timer_isr_epilogue(T) NOOP
--- a/Marlin/src/HAL/TEENSY40_41/timers.cpp
+++ b/Marlin/src/HAL/TEENSY40_41/timers.cpp
@@ -30,82 +30,41 @@

 void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) {
  switch (timer_num) {
-
-    //
-    // Step Timer – GPT1 - Compare Interrupt OCR1 - Reset Mode
-    //
    case MF_TIMER_STEP:
-      // 24MHz mode off – Use peripheral clock (150MHz)
-      CCM_CSCMR1 &= ~CCM_CSCMR1_PERCLK_CLK_SEL;
-      // Enable GPT1 clock gating
+      CCM_CSCMR1 &= ~CCM_CSCMR1_PERCLK_CLK_SEL; // turn off 24mhz mode
      CCM_CCGR1 |= CCM_CCGR1_GPT1_BUS(CCM_CCGR_ON);

-      // Disable timer, clear all status bits
-      GPT1_CR = 0;                      // Disable timer
-      GPT1_SR = 0x3F;                   // Clear all prior status
-
-      // Prescaler = 2 => 75MHz counting clock
+      GPT1_CR = 0;                   // disable timer
+      GPT1_SR = 0x3F;                // clear all prior status
      GPT1_PR = GPT1_TIMER_PRESCALE - 1;
+      GPT1_CR |= GPT_CR_CLKSRC(1);   //clock selection #1 (peripheral clock = 150 MHz)
+      GPT1_CR |= GPT_CR_ENMOD;       //reset count to zero before enabling
+      GPT1_CR |= GPT_CR_OM1(1);      // toggle mode
+      GPT1_OCR1 = (GPT1_TIMER_RATE / frequency) -1; // Initial compare value
+      GPT1_IR = GPT_IR_OF1IE;        // Compare3 value
+      GPT1_CR |= GPT_CR_EN;          //enable GPT2 counting at 150 MHz

-      GPT1_CR = GPT_CR_CLKSRC(1)        // Clock selection #1 (peripheral clock = 150 MHz)
-              | GPT_CR_ENMOD            // Reset count to zero before enabling
-              | GPT_CR_OM2(TERN(MARLIN_DEV_MODE, 1, 0)); // 0 = edge compare, 1 = toggle
-
-      // Compare value – the number of clocks between edges
-      GPT1_OCR1 = (GPT1_TIMER_RATE / frequency) - 1;
-
-      // Enable compare‑event interrupt
-      GPT1_IR = GPT_IR_OF1IE;           // OF1 interrupt enabled
-
-      // Pull Pin 15 HIGH (logic‑high is the “idle” state)
-      TERN_(MARLIN_DEV_MODE, OUT_WRITE(15, HIGH));
-
-      // Attach and enable Stepper IRQ
-      // Note: UART priority is 16
+      OUT_WRITE(15, HIGH);
      attachInterruptVector(IRQ_GPT1, &stepTC_Handler);
-      NVIC_SET_PRIORITY(IRQ_GPT1, 16);  // Priority 16 (higher than Temp Timer)
-
-      // Start GPT1 counting at 150 MHz
-      GPT1_CR |= GPT_CR_EN;
-
+      NVIC_SET_PRIORITY(IRQ_GPT1, 16);
      break;
-
-    //
-    // Temperature Timer – GPT2 - Compare Interrupt OCR1 - Reset Mode
-    //
    case MF_TIMER_TEMP:
-      // 24MHz mode off – Use peripheral clock (150MHz)
-      CCM_CSCMR1 &= ~CCM_CSCMR1_PERCLK_CLK_SEL;
-      // Enable GPT2 clock gating
+      CCM_CSCMR1 &= ~CCM_CSCMR1_PERCLK_CLK_SEL; // turn off 24mhz mode
      CCM_CCGR0 |= CCM_CCGR0_GPT2_BUS(CCM_CCGR_ON);

-      // Disable timer, clear all status bits
-      GPT2_CR = 0;                      // Disable timer
-      GPT2_SR = 0x3F;                   // Clear all prior status
-
-      // Prescaler = 10 => 15MHz counting clock
+      GPT2_CR = 0;                   // disable timer
+      GPT2_SR = 0x3F;                // clear all prior status
      GPT2_PR = GPT2_TIMER_PRESCALE - 1;
+      GPT2_CR |= GPT_CR_CLKSRC(1);   //clock selection #1 (peripheral clock = 150 MHz)
+      GPT2_CR |= GPT_CR_ENMOD;       //reset count to zero before enabling
+      GPT2_CR |= GPT_CR_OM1(1);      // toggle mode
+      GPT2_OCR1 = (GPT2_TIMER_RATE / frequency) -1; // Initial compare value
+      GPT2_IR = GPT_IR_OF1IE;        // Compare3 value
+      GPT2_CR |= GPT_CR_EN;          //enable GPT2 counting at 150 MHz

-      GPT2_CR = GPT_CR_CLKSRC(1)        // Clock selection #1 (peripheral clock = 150 MHz)
-              | GPT_CR_ENMOD            // and reset count to zero before enabling
-              | GPT_CR_OM2(TERN(MARLIN_DEV_MODE, 1, 0)); // 0 = edge compare, 1 = toggle
-
-      // Compare value – the number of clocks between edges
-      GPT2_OCR1 = (GPT2_TIMER_RATE / frequency) - 1;
-
-      // Enable compare‑event interrupt
-      GPT2_IR = GPT_IR_OF1IE;           // OF1 interrupt enabled
-
-      // Pull Pin 14 HIGH (logic‑high is the “idle” state)
-      TERN_(MARLIN_DEV_MODE, OUT_WRITE(14, HIGH));
-
-      // Attach Temperature ISR
+      OUT_WRITE(14, HIGH);
      attachInterruptVector(IRQ_GPT2, &tempTC_Handler);
-      NVIC_SET_PRIORITY(IRQ_GPT2, 32);  // Priority 32 (lower than Step Timer)
-
-      // Start GPT2 counting at 150 MHz
-      GPT2_CR |= GPT_CR_EN;
-
+      NVIC_SET_PRIORITY(IRQ_GPT2, 32);
      break;
  }
 }
@@ -123,7 +82,6 @@ void HAL_timer_disable_interrupt(const uint8_t timer_num) {
    case MF_TIMER_TEMP: NVIC_DISABLE_IRQ(IRQ_GPT2); break;
  }

-  // Ensure the CPU actually stops servicing the IRQ
  // We NEED memory barriers to ensure Interrupts are actually disabled!
  // ( https://dzone.com/articles/nvic-disabling-interrupts-on-arm-cortex-m-and-the )
  asm volatile("dsb");
@@ -139,8 +97,8 @@ bool HAL_timer_interrupt_enabled(const uint8_t timer_num) {

 void HAL_timer_isr_prologue(const uint8_t timer_num) {
  switch (timer_num) {
-    case MF_TIMER_STEP: GPT1_SR = GPT_IR_OF1IE; break;   // clear OF1
-    case MF_TIMER_TEMP: GPT2_SR = GPT_IR_OF1IE; break;
+    case MF_TIMER_STEP: GPT1_SR = GPT_IR_OF1IE; break; // clear OF3 bit
+    case MF_TIMER_TEMP: GPT2_SR = GPT_IR_OF1IE; break; // clear OF3 bit
  }
  asm volatile("dsb");
 }
--- a/Marlin/src/HAL/TEENSY40_41/timers.h
+++ b/Marlin/src/HAL/TEENSY40_41/timers.h
@@ -58,7 +58,7 @@ typedef uint32_t hal_timer_t;

 #define STEPPER_TIMER_RATE     GPT1_TIMER_RATE
 #define STEPPER_TIMER_TICKS_PER_US ((STEPPER_TIMER_RATE) / 1000000)
-#define STEPPER_TIMER_PRESCALE (GPT_TIMER_RATE / STEPPER_TIMER_RATE)
+#define STEPPER_TIMER_PRESCALE ((GPT_TIMER_RATE / 1000000) / STEPPER_TIMER_TICKS_PER_US)

 #define PULSE_TIMER_RATE       STEPPER_TIMER_RATE   // frequency of pulse timer
 #define PULSE_TIMER_PRESCALE   STEPPER_TIMER_PRESCALE
@@ -87,16 +87,8 @@ void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency);

 FORCE_INLINE static void HAL_timer_set_compare(const uint8_t timer_num, const hal_timer_t compare) {
  switch (timer_num) {
-    case MF_TIMER_STEP:
-      GPT1_CR |= GPT_CR_FRR;    // Free Run Mode (setting OCRx preserves CNT)
-      GPT1_OCR1 = compare - 1;
-      GPT1_CR &= ~GPT_CR_FRR;   // Reset Mode (CNT resets on trigger)
-      break;
-    case MF_TIMER_TEMP:
-      GPT2_CR |= GPT_CR_FRR;    // Free Run Mode (setting OCRx preserves CNT)
-      GPT2_OCR1 = compare - 1;
-      GPT2_CR &= ~GPT_CR_FRR;   // Reset Mode (CNT resets on trigger)
-      break;
+    case MF_TIMER_STEP: GPT1_OCR1 = compare - 1; break;
+    case MF_TIMER_TEMP: GPT2_OCR1 = compare - 1; break;
  }
 }

@@ -121,4 +113,5 @@ void HAL_timer_disable_interrupt(const uint8_t timer_num);
 bool HAL_timer_interrupt_enabled(const uint8_t timer_num);

 void HAL_timer_isr_prologue(const uint8_t timer_num);
-inline void HAL_timer_isr_epilogue(const uint8_t) {}
+//void HAL_timer_isr_epilogue(const uint8_t timer_num) {}
+#define HAL_timer_isr_epilogue(T) NOOP
--- a/Marlin/src/gcode/feature/digipot/M907-M910.cpp
+++ b/Marlin/src/gcode/feature/digipot/M907-M910.cpp
@@ -108,7 +108,7 @@ void GcodeSuite::M907() {
    // Additional extruders use B,C,D.
    // TODO: Change these parameters because 'E' is used and because 'D' should be reserved for debugging. B<index>?
    #if E_STEPPERS >= 2
-      for (uint8_t i = E_AXIS + 1; i < _MAX(DIGIPOT_I2C_NUM_CHANNELS, (NUM_AXES + 3)); i++)
+      for (uint8_t i = E_AXIS + 1; i <= _MIN(DIGIPOT_I2C_NUM_CHANNELS - 1, E_AXIS + 3); i++) // Up to B=E1 C=E2 D=E3
        if (parser.seenval('B' + i - (E_AXIS + 1))) digipot_i2c.set_current(i, parser.value_float());
    #endif
  #endif
--- a/Marlin/src/gcode/motion/G2_G3.cpp
+++ b/Marlin/src/gcode/motion/G2_G3.cpp
@@ -269,7 +269,7 @@ void plan_arc(
    // d) allows the print head to stop in the remining length of the curve within all configured maximum accelerations.
    // The last has to be calculated every time through the loop.
    const float limiting_accel = _MIN(planner.settings.max_acceleration_mm_per_s2[axis_p], planner.settings.max_acceleration_mm_per_s2[axis_q]),
-                limiting_speed = _MIN(planner.settings.max_feedrate_mm_s[axis_p], planner.settings.max_feedrate_mm_s[axis_q]),
+                limiting_speed = _MIN(planner.settings.max_feedrate_mm_s[axis_p], planner.settings.max_acceleration_mm_per_s2[axis_q]),
                limiting_speed_sqr = _MIN(sq(limiting_speed), limiting_accel * radius, sq(scaled_fr_mm_s));
    float arc_mm_remaining = flat_mm;

--- a/Marlin/src/inc/Version.h
+++ b/Marlin/src/inc/Version.h
@@ -25,7 +25,7 @@
 * Release version. Leave the Marlin version or apply a custom scheme.
 */
 #ifndef SHORT_BUILD_VERSION
-  #define SHORT_BUILD_VERSION "2.0.9.9"
+  #define SHORT_BUILD_VERSION "bugfix-2.0.x"
 #endif

 /**
@@ -42,7 +42,7 @@
 * version was tagged.
 */
 #ifndef STRING_DISTRIBUTION_DATE
-  #define STRING_DISTRIBUTION_DATE "2025-11-13"
+  #define STRING_DISTRIBUTION_DATE "2025-05-27"
 #endif

 /**
--- a/Marlin/src/lcd/marlinui.h
+++ b/Marlin/src/lcd/marlinui.h
@@ -519,7 +519,7 @@ public:
    static FSTR_P get_preheat_label(const uint8_t m);
    static void apply_preheat(const uint8_t m, const uint8_t pmask, const uint8_t e=active_extruder);
    static void preheat_set_fan(const uint8_t m) { TERN_(HAS_FAN, apply_preheat(m, _BV(PT_FAN))); }
-    static void preheat_hotend(const uint8_t m, const uint8_t e=active_extruder) { TERN_(HAS_HOTEND, apply_preheat(m, _BV(PT_HOTEND), e)); }
+    static void preheat_hotend(const uint8_t m, const uint8_t e=active_extruder) { TERN_(HAS_HOTEND, apply_preheat(m, _BV(PT_HOTEND))); }
    static void preheat_hotend_and_fan(const uint8_t m, const uint8_t e=active_extruder) { preheat_hotend(m, e); preheat_set_fan(m); }
    static void preheat_bed(const uint8_t m) { TERN_(HAS_HEATED_BED, apply_preheat(m, _BV(PT_BED))); }
    static void preheat_all(const uint8_t m) { apply_preheat(m, PT_ALL); }
--- a/Marlin/src/module/stepper.cpp
+++ b/Marlin/src/module/stepper.cpp
@@ -1444,7 +1444,11 @@ HAL_STEP_TIMER_ISR() {
  HAL_timer_isr_epilogue(MF_TIMER_STEP);
 }

-#define STEP_MULTIPLY(A,B) TERN(CPU_32_BIT, MultiU32X24toH32, MultiU24X32toH16)(A, B)
+#ifdef CPU_32_BIT
+  #define STEP_MULTIPLY(A,B) MultiU32X24toH32(A, B)
+#else
+  #define STEP_MULTIPLY(A,B) MultiU24X32toH16(A, B)
+#endif

 void Stepper::isr() {

--- a/Marlin/src/pins/pins.h
+++ b/Marlin/src/pins/pins.h
@@ -702,7 +702,7 @@
 #elif MB(ARTILLERY_RUBY)
  #include "stm32f4/pins_ARTILLERY_RUBY.h"      // STM32F4                                env:Artillery_Ruby
 #elif MB(CREALITY_V24S1_301F4)
-  #include "stm32f4/pins_CREALITY_V24S1_301F4.h" // STM32F4                               env:STM32F401RC_creality env:STM32F401RC_creality_nobootloader env:STM32F401RC_creality_jlink env:STM32F401RC_creality_stlink
+  #include "stm32f4/pins_CREALITY_V24S1_301F4.h" // STM32F4                               env:STM32F401RC_creality env:STM32F401RC_creality_jlink env:STM32F401RC_creality_stlink

 //
 // ARM Cortex M7
--- a/Marlin/src/pins/ramps/pins_RAMPS.h
+++ b/Marlin/src/pins/ramps/pins_RAMPS.h
@@ -427,15 +427,15 @@
 #endif

 //
-// AUX1    5V  GND D1  D0
+// AUX1    5V  GND D2  D1
 //          2   4   6   8
 //          1   3   5   7
 //         5V  GND A3  A4
 //
 #define AUX1_05_PIN                           57  // (A3)
-#define AUX1_06_PIN                            1  // TX0
+#define AUX1_06_PIN                            2
 #define AUX1_07_PIN                           58  // (A4)
-#define AUX1_08_PIN                            0  // RX0
+#define AUX1_08_PIN                            1

 //
 // AUX2    GND A9 D40 D42 A11
--- a/README.md
+++ b/README.md
@@ -15,10 +15,14 @@
 Additional documentation can be found at the [Marlin Home Page](https://marlinfw.org/).
 Please test this firmware and let us know if it misbehaves in any way. Volunteers are standing by!

-## Marlin 2.0
+## Marlin 2.0 Bugfix Branch
+
+__Not for production use. Use with caution!__

 Marlin 2.0 takes this popular RepRap firmware to the next level by adding support for much faster 32-bit and ARM-based boards while improving support for 8-bit AVR boards. Read about Marlin's decision to use a "Hardware Abstraction Layer" below.

+This branch is for patches to the latest 2.0.x release version. Periodically this branch will form the basis for the next minor 2.0.x release.
+
 Download earlier versions of Marlin on the [Releases page](https://github.com/MarlinFirmware/Marlin/releases).

 ## Example Configurations
@@ -27,10 +31,11 @@ Before building Marlin you'll need to configure it for your specific hardware. Y

 ## Building Marlin 2.0

-To build Marlin 2.0 you'll need [Arduino IDE 1.8.8 or newer](https://www.arduino.cc/en/main/software) or [PlatformIO](http://docs.platformio.org/en/latest/ide.html#platformio-ide). Detailed build and install instructions are posted at:
+To build Marlin 2.0 you'll need [Arduino IDE 1.8.8 or newer](https://www.arduino.cc/en/main/software) or [PlatformIO](https://docs.platformio.org/en/latest/ide.html#platformio-ide). We've posted detailed instructions on [Building Marlin with Arduino](https://marlinfw.org/docs/basics/install_arduino.html) and [Building Marlin with PlatformIO for ReArm](https://marlinfw.org/docs/basics/install_rearm.html) (which applies well to other 32-bit boards).

-  - [Installing Marlin (Arduino)](http://marlinfw.org/docs/basics/install_arduino.html)
-  - [Installing Marlin (VSCode)](http://marlinfw.org/docs/basics/install_platformio_vscode.html).
+## Hardware Abstraction Layer (HAL)
+
+Marlin 2.0 introduces a layer of abstraction so that all the existing high-level code can be built for 32-bit platforms while still retaining full 8-bit AVR compatibility. Retaining AVR compatibility and a single code-base is important to us, because we want to make sure that features and patches get as much testing and attention as possible, and that all platforms always benefit from the latest improvements.

 ### Supported Platforms

@@ -52,11 +57,18 @@ To build Marlin 2.0 you'll need [Arduino IDE 1.8.8 or newer](https://www.arduino
  [Teensy 4.1](https://www.pjrc.com/store/teensy41.html)|ARM® Cortex-M7|
  Linux Native|x86/ARM/etc.|Raspberry Pi

-## Submitting Changes
+## Submitting Patches

- Submit **Bug Fixes** as Pull Requests to the ([bugfix-2.0.x](https://github.com/MarlinFirmware/Marlin/tree/bugfix-2.0.x)) branch.
- Follow the [Coding Standards](http://marlinfw.org/docs/development/coding_standards.html) to gain points with the maintainers.
- Please submit your questions and concerns to the [Issue Queue](https://github.com/MarlinFirmware/Marlin/issues).
+Proposed patches should be submitted as a Pull Request against the ([bugfix-2.0.x](https://github.com/MarlinFirmware/Marlin/tree/bugfix-2.0.x)) branch.
+
+- This branch is for fixing bugs and integrating any new features for the duration of the Marlin 2.0.x life-cycle.
+- Follow the [Coding Standards](https://marlinfw.org/docs/development/coding_standards.html) to gain points with the maintainers.
+- Please submit Feature Requests and Bug Reports to the [Issue Queue](https://github.com/MarlinFirmware/Marlin/issues/new/choose). Support resources are also listed there.
+- Whenever you add new features, be sure to add tests to `buildroot/tests` and then run your tests locally, if possible.
+  - It's optional: Running all the tests on Windows might take a long time, and they will run anyway on GitHub.
+  - If you're running the tests on Linux (or on WSL with the code on a Linux volume) the speed is much faster.
+  - You can use `make tests-all-local` or `make tests-single-local TEST_TARGET=...`.
+  - If you prefer Docker you can use `make tests-all-local-docker` or `make tests-all-local-docker TEST_TARGET=...`.

 ## Marlin Support

--- a/buildroot/bin/use_example_configs
+++ b/buildroot/bin/use_example_configs
@@ -5,7 +5,7 @@
 # Examples:
 #   use_example_configs
 #   use_example_configs Creality/CR-10/CrealityV1
-#   use_example_configs release-2.0.9.7:Creality/CR-10/CrealityV1
+#   use_example_configs release-2.0.9.4:Creality/CR-10/CrealityV1
 #
 # If a configpath has spaces (or quotes) escape them or enquote the path
 #
--- a/buildroot/share/PlatformIO/scripts/chitu_crypt.py
+++ b/buildroot/share/PlatformIO/scripts/chitu_crypt.py
@@ -4,9 +4,9 @@
 #
 import pioutil
 if pioutil.is_pio_build():
-    import os,random,struct,uuid,marlin
-    # Relocate firmware from 0x08000000 to 0x08008800
-    marlin.relocate_firmware("0x08008800")
+    import struct,uuid,marlin
+
+    board = marlin.env.BoardConfig()

    def calculate_crc(contents, seed):
        accumulating_xor_value = seed;
@@ -105,13 +105,22 @@ if pioutil.is_pio_build():

    # Encrypt ${PROGNAME}.bin and save it as 'update.cbd'
    def encrypt(source, target, env):
-        firmware = open(target[0].path, "rb")
-        update = open(target[0].dir.path + '/update.cbd', "wb")
-        length = os.path.getsize(target[0].path)
+        from pathlib import Path

-        encrypt_file(firmware, update, length)
+        fwpath = Path(target[0].path)
+        fwsize = fwpath.stat().st_size

-        firmware.close()
-        update.close()
+        enname = board.get("build.crypt_chitu")
+        enpath = Path(target[0].dir.path)

+        fwfile = fwpath.open("rb")
+        enfile = (enpath / enname).open("wb")
+
+        print(f"Encrypting {fwpath} to {enname}")
+        encrypt_file(fwfile, enfile, fwsize)
+        fwfile.close()
+        enfile.close()
+        fwpath.unlink()
+
+    marlin.relocate_firmware("0x08008800")
    marlin.add_post_action(encrypt);
--- a/buildroot/share/PlatformIO/scripts/common-dependencies.py
+++ b/buildroot/share/PlatformIO/scripts/common-dependencies.py
@@ -60,7 +60,7 @@ if pioutil.is_pio_build():
        for line in atoms:
            parts = line.split('=')
            name = parts.pop(0)
-            if name in ['build_flags', 'extra_scripts', 'build_src_filter', 'lib_ignore']:
+            if name in ['build_flags', 'extra_scripts', 'src_filter', 'lib_ignore']:
                feat[name] = '='.join(parts)
                blab("[%s] %s=%s" % (feature, name, feat[name]), 3)
            else:
@@ -172,19 +172,19 @@ if pioutil.is_pio_build():
                blab("Running extra_scripts for %s... " % feature, 2)
                env.SConscript(feat['extra_scripts'], exports="env")

-            if 'build_src_filter' in feat:
+            if 'src_filter' in feat:
                blab("========== Adding build_src_filter for %s... " % feature, 2)
-                build_src_filter = ' '.join(env.GetProjectOption('build_src_filter'))
+                src_filter = ' '.join(env.GetProjectOption('src_filter'))
                # first we need to remove the references to the same folder
-                my_srcs = re.findall(r'[+-](<.*?>)', feat['build_src_filter'])
-                cur_srcs = re.findall(r'[+-](<.*?>)', build_src_filter)
+                my_srcs = re.findall(r'[+-](<.*?>)', feat['src_filter'])
+                cur_srcs = re.findall(r'[+-](<.*?>)', src_filter)
                for d in my_srcs:
                    if d in cur_srcs:
-                        build_src_filter = re.sub(r'[+-]' + d, '', build_src_filter)
+                        src_filter = re.sub(r'[+-]' + d, '', src_filter)

-                build_src_filter = feat['build_src_filter'] + ' ' + build_src_filter
-                set_env_field('build_src_filter', [build_src_filter])
-                env.Replace(SRC_FILTER=build_src_filter)
+                src_filter = feat['src_filter'] + ' ' + src_filter
+                set_env_field('build_src_filter', [src_filter])
+                env.Replace(SRC_FILTER=src_filter)

            if 'lib_ignore' in feat:
                blab("========== Adding lib_ignore for %s... " % feature, 2)
--- a/buildroot/share/PlatformIO/scripts/marlin.py
+++ b/buildroot/share/PlatformIO/scripts/marlin.py
@@ -16,8 +16,7 @@ def copytree(src, dst, symlinks=False, ignore=None):
            shutil.copy2(item, dst / item.name)

 def replace_define(field, value):
-    envdefs = env['CPPDEFINES'].copy()
-    for define in envdefs:
+    for define in env['CPPDEFINES']:
        if define[0] == field:
            env['CPPDEFINES'].remove(define)
    env['CPPDEFINES'].append((field, value))
--- a/buildroot/share/PlatformIO/scripts/preflight-checks.py
+++ b/buildroot/share/PlatformIO/scripts/preflight-checks.py
@@ -129,10 +129,8 @@ if pioutil.is_pio_build():
        #
        if 'FILAMENT_RUNOUT_SENSOR' in env['MARLIN_FEATURES'] and 'NUM_RUNOUT_SENSORS' in env['MARLIN_FEATURES']:
            if env['MARLIN_FEATURES']['NUM_RUNOUT_SENSORS'].isdigit() and int(env['MARLIN_FEATURES']['NUM_RUNOUT_SENSORS']) > 1:
-                if 'FILAMENT_RUNOUT_SCRIPT' in env['MARLIN_FEATURES']:
-                    frs = env['MARLIN_FEATURES']['FILAMENT_RUNOUT_SCRIPT']
-                    if "M600" in frs and "%c" not in frs:
-                        err = "ERROR: FILAMENT_RUNOUT_SCRIPT needs a %c parameter (e.g., \"M600 T%c\") when NUM_RUNOUT_SENSORS is > 1"
-                        raise SystemExit(err)
+                if 'FILAMENT_RUNOUT_SCRIPT' in env['MARLIN_FEATURES'] and "%c" not in env['MARLIN_FEATURES']['FILAMENT_RUNOUT_SCRIPT']:
+                    err = "ERROR: FILAMENT_RUNOUT_SCRIPT needs a %c parameter (e.g., 'M600 T%c') when NUM_RUNOUT_SENSORS is > 1."
+                    raise SystemExit(err)

    sanity_check_target()
--- a/config/README.md
+++ b/config/README.md
@@ -1,3 +1,9 @@
 # Where have all the configurations gone?

-## https://github.com/MarlinFirmware/Configurations/archive/release-2.0.9.7.zip
+Marlin configurations for specific machines are now maintained in their own repository at:
+
+## https://github.com/MarlinFirmware/Configurations/tree/bugfix-2.0.x
+
+Configuration files for use with the nightly `bugfix-2.0.x` branch can be downloaded from:
+
+## https://github.com/MarlinFirmware/Configurations/archive/bugfix-2.0.x.zip
--- a/ini/features.ini
+++ b/ini/features.ini
@@ -11,233 +11,233 @@

 [features]
 YHCB2004                               = red-scorp/LiquidCrystal_AIP31068@^1.0.4, red-scorp/SoftSPIB@^1.1.1
-HAS_TFT_LVGL_UI                        = lvgl=https://github.com/makerbase-mks/LVGL-6.1.1-MKS/archive/a3ebe98bc6.zip
-                                         build_src_filter=+<src/lcd/extui/mks_ui>
+HAS_TFT_LVGL_UI                        = lvgl=https://github.com/makerbase-mks/LVGL-6.1.1-MKS/archive/master.zip
+                                         src_filter=+<src/lcd/extui/mks_ui>
                                         extra_scripts=download_mks_assets.py
-POSTMORTEM_DEBUGGING                   = build_src_filter=+<src/HAL/shared/cpu_exception> +<src/HAL/shared/backtrace>
+POSTMORTEM_DEBUGGING                   = src_filter=+<src/HAL/shared/cpu_exception> +<src/HAL/shared/backtrace>
                                         build_flags=-funwind-tables
-MKS_WIFI_MODULE                        = QRCode=https://github.com/makerbase-mks/QRCode/archive/261c5a696a.zip
+MKS_WIFI_MODULE                        = QRCode=https://github.com/makerbase-mks/QRCode/archive/master.zip
 HAS_TRINAMIC_CONFIG                    = TMCStepper@~0.7.3
-                                         build_src_filter=+<src/module/stepper/trinamic.cpp> +<src/gcode/feature/trinamic/M122.cpp> +<src/gcode/feature/trinamic/M906.cpp> +<src/gcode/feature/trinamic/M911-M914.cpp> +<src/gcode/feature/trinamic/M919.cpp>
-HAS_T(RINAMIC_CONFIG|MC_SPI)           = build_src_filter=+<src/feature/tmc_util.cpp>
-HAS_STEALTHCHOP                        = build_src_filter=+<src/gcode/feature/trinamic/M569.cpp>
-SR_LCD_3W_NL                           = SailfishLCD=https://github.com/mikeshub/SailfishLCD/archive/6f53c19a8a.zip
+                                         src_filter=+<src/module/stepper/trinamic.cpp> +<src/gcode/feature/trinamic/M122.cpp> +<src/gcode/feature/trinamic/M906.cpp> +<src/gcode/feature/trinamic/M911-M914.cpp> +<src/gcode/feature/trinamic/M919.cpp>
+HAS_T(RINAMIC_CONFIG|MC_SPI)           = src_filter=+<src/feature/tmc_util.cpp>
+HAS_STEALTHCHOP                        = src_filter=+<src/gcode/feature/trinamic/M569.cpp>
+SR_LCD_3W_NL                           = SailfishLCD=https://github.com/mikeshub/SailfishLCD/archive/master.zip
 HAS_MOTOR_CURRENT_I2C                  = SlowSoftI2CMaster
-                                         build_src_filter=+<src/feature/digipot>
-HAS_TMC26X                             = TMC26XStepper=https://github.com/MarlinFirmware/TMC26XStepper/archive/a7d7c92a13.zip
-                                         build_src_filter=+<src/module/stepper/TMC26X.cpp>
+                                         src_filter=+<src/feature/digipot>
+HAS_TMC26X                             = TMC26XStepper=https://github.com/MarlinFirmware/TMC26XStepper/archive/master.zip
+                                         src_filter=+<src/module/stepper/TMC26X.cpp>
 HAS_L64XX                              = Arduino-L6470@0.8.0
-                                         build_src_filter=+<src/libs/L64XX> +<src/module/stepper/L64xx.cpp> +<src/gcode/feature/L6470> +<src/HAL/shared/HAL_spi_L6470.cpp>
-LIB_INTERNAL_MAX31865                  = build_src_filter=+<src/libs/MAX31865.cpp>
+                                         src_filter=+<src/libs/L64XX> +<src/module/stepper/L64xx.cpp> +<src/gcode/feature/L6470> +<src/HAL/shared/HAL_spi_L6470.cpp>
+LIB_INTERNAL_MAX31865                  = src_filter=+<src/libs/MAX31865.cpp>
 NEOPIXEL_LED                           = adafruit/Adafruit NeoPixel@~1.8.0
-                                         build_src_filter=+<src/feature/leds/neopixel.cpp>
+                                         src_filter=+<src/feature/leds/neopixel.cpp>
 I2C_AMMETER                            = peterus/INA226Lib@1.1.2
-                                         build_src_filter=+<src/feature/ammeter.cpp>
+                                         src_filter=+<src/feature/ammeter.cpp>
 USES_LIQUIDCRYSTAL                     = LiquidCrystal=https://github.com/MarlinFirmware/New-LiquidCrystal/archive/1.5.1.zip
 USES_LIQUIDCRYSTAL_I2C                 = marcoschwartz/LiquidCrystal_I2C@1.1.4
 USES_LIQUIDTWI2                        = LiquidTWI2@1.2.7
-HAS_LCDPRINT                           = build_src_filter=+<src/lcd/lcdprint.cpp>
-HAS_MARLINUI_HD44780                   = build_src_filter=+<src/lcd/HD44780>
+HAS_LCDPRINT                           = src_filter=+<src/lcd/lcdprint.cpp>
+HAS_MARLINUI_HD44780                   = src_filter=+<src/lcd/HD44780>
 HAS_MARLINUI_U8GLIB                    = U8glib-HAL@~0.5.2
-                                         build_src_filter=+<src/lcd/dogm>
-HAS_(FSMC|SPI|LTDC)_TFT                = build_src_filter=+<src/HAL/STM32/tft> +<src/HAL/STM32F1/tft> +<src/lcd/tft_io>
-HAS_FSMC_TFT                           = build_src_filter=+<src/HAL/STM32/tft/tft_fsmc.cpp> +<src/HAL/STM32F1/tft/tft_fsmc.cpp>
-HAS_SPI_TFT                            = build_src_filter=+<src/HAL/STM32/tft/tft_spi.cpp> +<src/HAL/STM32F1/tft/tft_spi.cpp>
-I2C_EEPROM                             = build_src_filter=+<src/HAL/shared/eeprom_if_i2c.cpp>
-SOFT_I2C_EEPROM                        = SlowSoftI2CMaster, SlowSoftWire=https://github.com/felias-fogg/SlowSoftWire/archive/f34d777f39.zip
-SPI_EEPROM                             = build_src_filter=+<src/HAL/shared/eeprom_if_spi.cpp>
-HAS_DWIN_E3V2|IS_DWIN_MARLINUI         = build_src_filter=+<src/lcd/e3v2/common>
-DWIN_CREALITY_LCD                      = build_src_filter=+<src/lcd/e3v2/creality>
-DWIN_LCD_PROUI                         = build_src_filter=+<src/lcd/e3v2/proui>
-DWIN_CREALITY_LCD_JYERSUI              = build_src_filter=+<src/lcd/e3v2/jyersui>
-IS_DWIN_MARLINUI                       = build_src_filter=+<src/lcd/e3v2/marlinui>
-HAS_GRAPHICAL_TFT                      = build_src_filter=+<src/lcd/tft>
-IS_TFTGLCD_PANEL                       = build_src_filter=+<src/lcd/TFTGLCD>
-HAS_TOUCH_BUTTONS                      = build_src_filter=+<src/lcd/touch/touch_buttons.cpp>
-HAS_MARLINUI_MENU                      = build_src_filter=+<src/lcd/menu>
-HAS_GAMES                              = build_src_filter=+<src/lcd/menu/game/game.cpp>
-MARLIN_BRICKOUT                        = build_src_filter=+<src/lcd/menu/game/brickout.cpp>
-MARLIN_INVADERS                        = build_src_filter=+<src/lcd/menu/game/invaders.cpp>
-MARLIN_MAZE                            = build_src_filter=+<src/lcd/menu/game/maze.cpp>
-MARLIN_SNAKE                           = build_src_filter=+<src/lcd/menu/game/snake.cpp>
-HAS_MENU_BACKLASH                      = build_src_filter=+<src/lcd/menu/menu_backlash.cpp>
-HAS_MENU_BED_CORNERS                   = build_src_filter=+<src/lcd/menu/menu_bed_corners.cpp>
-LCD_BED_LEVELING                       = build_src_filter=+<src/lcd/menu/menu_bed_leveling.cpp>
-HAS_MENU_CANCELOBJECT                  = build_src_filter=+<src/lcd/menu/menu_cancelobject.cpp>
-HAS_MENU_DELTA_CALIBRATE               = build_src_filter=+<src/lcd/menu/menu_delta_calibrate.cpp>
-HAS_MENU_FILAMENT                      = build_src_filter=+<src/lcd/menu/menu_filament.cpp>
-LCD_INFO_MENU                          = build_src_filter=+<src/lcd/menu/menu_info.cpp>
-HAS_MENU_JOB_RECOVERY                  = build_src_filter=+<src/lcd/menu/menu_job_recovery.cpp>
-HAS_MULTI_LANGUAGE                     = build_src_filter=+<src/lcd/menu/menu_language.cpp> +<src/gcode/lcd/M414.cpp>
-HAS_MENU_LED                           = build_src_filter=+<src/lcd/menu/menu_led.cpp>
-HAS_MENU_MEDIA                         = build_src_filter=+<src/lcd/menu/menu_media.cpp>
-HAS_MENU_MIXER                         = build_src_filter=+<src/lcd/menu/menu_mixer.cpp>
-HAS_MENU_MMU2                          = build_src_filter=+<src/lcd/menu/menu_mmu2.cpp>
-HAS_MENU_PASSWORD                      = build_src_filter=+<src/lcd/menu/menu_password.cpp>
-HAS_MENU_POWER_MONITOR                 = build_src_filter=+<src/lcd/menu/menu_power_monitor.cpp>
-HAS_MENU_CUTTER                        = build_src_filter=+<src/lcd/menu/menu_spindle_laser.cpp>
-HAS_MENU_TEMPERATURE                   = build_src_filter=+<src/lcd/menu/menu_temperature.cpp>
-HAS_MENU_TMC                           = build_src_filter=+<src/lcd/menu/menu_tmc.cpp>
-HAS_MENU_TOUCH_SCREEN                  = build_src_filter=+<src/lcd/menu/menu_touch_screen.cpp>
-HAS_MENU_TRAMMING                      = build_src_filter=+<src/lcd/menu/menu_tramming.cpp>
-HAS_MENU_UBL                           = build_src_filter=+<src/lcd/menu/menu_ubl.cpp>
-ANYCUBIC_LCD_CHIRON                    = build_src_filter=+<src/lcd/extui/anycubic_chiron>
-ANYCUBIC_LCD_I3MEGA                    = build_src_filter=+<src/lcd/extui/anycubic_i3mega>
-HAS_DGUS_LCD_CLASSIC                   = build_src_filter=+<src/lcd/extui/dgus>
-DGUS_LCD_UI_RELOADED                   = build_src_filter=+<src/lcd/extui/dgus_reloaded>
-DGUS_LCD_UI_FYSETC                     = build_src_filter=+<src/lcd/extui/dgus/fysetc>
-DGUS_LCD_UI_HIPRECY                    = build_src_filter=+<src/lcd/extui/dgus/hiprecy>
-DGUS_LCD_UI_MKS                        = build_src_filter=+<src/lcd/extui/dgus/mks>
-DGUS_LCD_UI_ORIGIN                     = build_src_filter=+<src/lcd/extui/dgus/origin>
-EXTUI_EXAMPLE                          = build_src_filter=+<src/lcd/extui/example>
-TOUCH_UI_FTDI_EVE                      = build_src_filter=+<src/lcd/extui/ftdi_eve_touch_ui>
-MALYAN_LCD                             = build_src_filter=+<src/lcd/extui/malyan>
-NEXTION_TFT                            = build_src_filter=+<src/lcd/extui/nextion>
-USE_UHS2_USB                           = build_src_filter=+<src/sd/usb_flashdrive/lib-uhs2>
-USE_UHS3_USB                           = build_src_filter=+<src/sd/usb_flashdrive/lib-uhs3>
-USB_FLASH_DRIVE_SUPPORT                = build_src_filter=+<src/sd/usb_flashdrive/Sd2Card_FlashDrive.cpp>
-HAS_MCP3426_ADC                        = build_src_filter=+<src/feature/adc> +<src/gcode/feature/adc>
-AUTO_BED_LEVELING_BILINEAR             = build_src_filter=+<src/feature/bedlevel/abl>
-AUTO_BED_LEVELING_(3POINT|(BI)?LINEAR) = build_src_filter=+<src/gcode/bedlevel/abl>
-X_AXIS_TWIST_COMPENSATION              = build_src_filter=+<src/feature/x_twist.cpp> +<src/lcd/menu/menu_x_twist.cpp> +<src/gcode/probe/M423.cpp>
-MESH_BED_LEVELING                      = build_src_filter=+<src/feature/bedlevel/mbl> +<src/gcode/bedlevel/mbl>
-AUTO_BED_LEVELING_UBL                  = build_src_filter=+<src/feature/bedlevel/ubl> +<src/gcode/bedlevel/ubl>
-UBL_HILBERT_CURVE                      = build_src_filter=+<src/feature/bedlevel/hilbert_curve.cpp>
-BACKLASH_COMPENSATION                  = build_src_filter=+<src/feature/backlash.cpp>
-BARICUDA                               = build_src_filter=+<src/feature/baricuda.cpp> +<src/gcode/feature/baricuda>
-BINARY_FILE_TRANSFER                   = build_src_filter=+<src/feature/binary_stream.cpp> +<src/libs/heatshrink>
-BLTOUCH                                = build_src_filter=+<src/feature/bltouch.cpp>
-CANCEL_OBJECTS                         = build_src_filter=+<src/feature/cancel_object.cpp> +<src/gcode/feature/cancel>
-CASE_LIGHT_ENABLE                      = build_src_filter=+<src/feature/caselight.cpp> +<src/gcode/feature/caselight>
-EXTERNAL_CLOSED_LOOP_CONTROLLER        = build_src_filter=+<src/feature/closedloop.cpp> +<src/gcode/calibrate/M12.cpp>
-USE_CONTROLLER_FAN                     = build_src_filter=+<src/feature/controllerfan.cpp>
-HAS_COOLER|LASER_COOLANT_FLOW_METER    = build_src_filter=+<src/feature/cooler.cpp>
-HAS_MOTOR_CURRENT_DAC                  = build_src_filter=+<src/feature/dac>
-DIRECT_STEPPING                        = build_src_filter=+<src/feature/direct_stepping.cpp> +<src/gcode/motion/G6.cpp>
-EMERGENCY_PARSER                       = build_src_filter=+<src/feature/e_parser.cpp> -<src/gcode/control/M108_*.cpp>
-EASYTHREED_UI                          = build_src_filter=+<src/feature/easythreed_ui.cpp>
-I2C_POSITION_ENCODERS                  = build_src_filter=+<src/feature/encoder_i2c.cpp>
-IIC_BL24CXX_EEPROM                     = build_src_filter=+<src/libs/BL24CXX.cpp>
-HAS_SPI_FLASH                          = build_src_filter=+<src/libs/W25Qxx.cpp>
-HAS_ETHERNET                           = build_src_filter=+<src/feature/ethernet.cpp> +<src/gcode/feature/network/M552-M554.cpp>
-HAS_FANCHECK                           = build_src_filter=+<src/feature/fancheck.cpp> +<src/gcode/temp/M123.cpp>
-HAS_FANMUX                             = build_src_filter=+<src/feature/fanmux.cpp>
-FILAMENT_WIDTH_SENSOR                  = build_src_filter=+<src/feature/filwidth.cpp> +<src/gcode/feature/filwidth>
-FWRETRACT                              = build_src_filter=+<src/feature/fwretract.cpp> +<src/gcode/feature/fwretract>
-HOST_ACTION_COMMANDS                   = build_src_filter=+<src/feature/host_actions.cpp>
-HOTEND_IDLE_TIMEOUT                    = build_src_filter=+<src/feature/hotend_idle.cpp>
-JOYSTICK                               = build_src_filter=+<src/feature/joystick.cpp>
-BLINKM                                 = build_src_filter=+<src/feature/leds/blinkm.cpp>
-HAS_COLOR_LEDS                         = build_src_filter=+<src/feature/leds/leds.cpp> +<src/gcode/feature/leds/M150.cpp>
-PCA9533                                = build_src_filter=+<src/feature/leds/pca9533.cpp>
-PCA9632                                = build_src_filter=+<src/feature/leds/pca9632.cpp>
-PRINTER_EVENT_LEDS                     = build_src_filter=+<src/feature/leds/printer_event_leds.cpp>
-TEMP_STAT_LEDS                         = build_src_filter=+<src/feature/leds/tempstat.cpp>
-MAX7219_DEBUG                          = build_src_filter=+<src/feature/max7219.cpp> +<src/gcode/feature/leds/M7219.cpp>
-HAS_MEATPACK                           = build_src_filter=+<src/feature/meatpack.cpp>
-MIXING_EXTRUDER                        = build_src_filter=+<src/feature/mixing.cpp> +<src/gcode/feature/mixing/M163-M165.cpp>
-HAS_PRUSA_MMU1                         = build_src_filter=+<src/feature/mmu/mmu.cpp>
-HAS_PRUSA_MMU2                         = build_src_filter=+<src/feature/mmu/mmu2.cpp> +<src/gcode/feature/prusa_MMU2>
-PASSWORD_FEATURE                       = build_src_filter=+<src/feature/password> +<src/gcode/feature/password>
-ADVANCED_PAUSE_FEATURE                 = build_src_filter=+<src/feature/pause.cpp> +<src/gcode/feature/pause/M600.cpp> +<src/gcode/feature/pause/M603.cpp>
-PSU_CONTROL                            = build_src_filter=+<src/feature/power.cpp>
-HAS_POWER_MONITOR                      = build_src_filter=+<src/feature/power_monitor.cpp> +<src/gcode/feature/power_monitor>
-POWER_LOSS_RECOVERY                    = build_src_filter=+<src/feature/powerloss.cpp> +<src/gcode/feature/powerloss>
-HAS_PTC                                = build_src_filter=+<src/feature/probe_temp_comp.cpp> +<src/gcode/calibrate/G76_M871.cpp>
-HAS_FILAMENT_SENSOR                    = build_src_filter=+<src/feature/runout.cpp> +<src/gcode/feature/runout>
-(EXT|MANUAL)_SOLENOID.*                = build_src_filter=+<src/feature/solenoid.cpp> +<src/gcode/control/M380_M381.cpp>
-MK2_MULTIPLEXER                        = build_src_filter=+<src/feature/snmm.cpp>
-HAS_CUTTER                             = build_src_filter=+<src/feature/spindle_laser.cpp> +<src/gcode/control/M3-M5.cpp>
-HAS_DRIVER_SAFE_POWER_PROTECT          = build_src_filter=+<src/feature/stepper_driver_safety.cpp>
-EXPERIMENTAL_I2CBUS                    = build_src_filter=+<src/feature/twibus.cpp> +<src/gcode/feature/i2c>
-G26_MESH_VALIDATION                    = build_src_filter=+<src/gcode/bedlevel/G26.cpp>
-ASSISTED_TRAMMING                      = build_src_filter=+<src/feature/tramming.cpp> +<src/gcode/bedlevel/G35.cpp>
-HAS_MESH                               = build_src_filter=+<src/gcode/bedlevel/G42.cpp>
-HAS_LEVELING                           = build_src_filter=+<src/gcode/bedlevel/M420.cpp> +<src/feature/bedlevel/bedlevel.cpp>
-MECHANICAL_GANTRY_CAL.+                = build_src_filter=+<src/gcode/calibrate/G34.cpp>
-Z_MULTI_ENDSTOPS|Z_STEPPER_AUTO_ALIGN  = build_src_filter=+<src/gcode/calibrate/G34_M422.cpp>
-Z_STEPPER_AUTO_ALIGN                   = build_src_filter=+<src/feature/z_stepper_align.cpp>
-DELTA_AUTO_CALIBRATION                 = build_src_filter=+<src/gcode/calibrate/G33.cpp>
-CALIBRATION_GCODE                      = build_src_filter=+<src/gcode/calibrate/G425.cpp>
-Z_MIN_PROBE_REPEATABILITY_TEST         = build_src_filter=+<src/gcode/calibrate/M48.cpp>
-M100_FREE_MEMORY_WATCHER               = build_src_filter=+<src/gcode/calibrate/M100.cpp>
-BACKLASH_GCODE                         = build_src_filter=+<src/gcode/calibrate/M425.cpp>
-IS_KINEMATIC                           = build_src_filter=+<src/gcode/calibrate/M665.cpp>
-HAS_EXTRA_ENDSTOPS                     = build_src_filter=+<src/gcode/calibrate/M666.cpp>
-SKEW_CORRECTION_GCODE                  = build_src_filter=+<src/gcode/calibrate/M852.cpp>
-DIRECT_PIN_CONTROL                     = build_src_filter=+<src/gcode/control/M42.cpp> +<src/gcode/control/M226.cpp>
-PINS_DEBUGGING                         = build_src_filter=+<src/gcode/config/M43.cpp>
-NO_VOLUMETRICS                         = build_src_filter=-<src/gcode/config/M200-M205.cpp>
-HAS_MULTI_EXTRUDER                     = build_src_filter=+<src/gcode/config/M217.cpp>
-HAS_HOTEND_OFFSET                      = build_src_filter=+<src/gcode/config/M218.cpp>
-EDITABLE_SERVO_ANGLES                  = build_src_filter=+<src/gcode/config/M281.cpp>
-PIDTEMP                                = build_src_filter=+<src/gcode/config/M301.cpp>
-PREVENT_COLD_EXTRUSION                 = build_src_filter=+<src/gcode/config/M302.cpp>
-PIDTEMPBED                             = build_src_filter=+<src/gcode/config/M304.cpp>
-HAS_USER_THERMISTORS                   = build_src_filter=+<src/gcode/config/M305.cpp>
-SD_ABORT_ON_ENDSTOP_HIT                = build_src_filter=+<src/gcode/config/M540.cpp>
-BAUD_RATE_GCODE                        = build_src_filter=+<src/gcode/config/M575.cpp>
-HAS_SMART_EFF_MOD                      = build_src_filter=+<src/gcode/config/M672.cpp>
-COOLANT_CONTROL|AIR_ASSIST             = build_src_filter=+<src/gcode/control/M7-M9.cpp>
-AIR_EVACUATION                         = build_src_filter=+<src/gcode/control/M10-M11.cpp>
-HAS_SOFTWARE_ENDSTOPS                  = build_src_filter=+<src/gcode/control/M211.cpp>
-SERVO_DETACH_GCODE                     = build_src_filter=+<src/gcode/control/M282.cpp>
-HAS_DUPLICATION_MODE                   = build_src_filter=+<src/gcode/control/M605.cpp>
-LIN_ADVANCE                            = build_src_filter=+<src/gcode/feature/advance>
-PHOTO_GCODE                            = build_src_filter=+<src/gcode/feature/camera>
-CONTROLLER_FAN_EDITABLE                = build_src_filter=+<src/gcode/feature/controllerfan>
-GCODE_MACROS                           = build_src_filter=+<src/gcode/feature/macro>
-GRADIENT_MIX                           = build_src_filter=+<src/gcode/feature/mixing/M166.cpp>
-HAS_SAVED_POSITIONS                    = build_src_filter=+<src/gcode/feature/pause/G60.cpp> +<src/gcode/feature/pause/G61.cpp>
-PARK_HEAD_ON_PAUSE                     = build_src_filter=+<src/gcode/feature/pause/M125.cpp>
-FILAMENT_LOAD_UNLOAD_GCODES            = build_src_filter=+<src/gcode/feature/pause/M701_M702.cpp>
-CNC_WORKSPACE_PLANES                   = build_src_filter=+<src/gcode/geometry/G17-G19.cpp>
-CNC_COORDINATE_SYSTEMS                 = build_src_filter=+<src/gcode/geometry/G53-G59.cpp>
-HAS_M206_COMMAND                       = build_src_filter=+<src/gcode/geometry/M206_M428.cpp>
-EXPECTED_PRINTER_CHECK                 = build_src_filter=+<src/gcode/host/M16.cpp>
-HOST_KEEPALIVE_FEATURE                 = build_src_filter=+<src/gcode/host/M113.cpp>
-AUTO_REPORT_POSITION                   = build_src_filter=+<src/gcode/host/M154.cpp>
-REPETIER_GCODE_M360                    = build_src_filter=+<src/gcode/host/M360.cpp>
-HAS_GCODE_M876                         = build_src_filter=+<src/gcode/host/M876.cpp>
-HAS_RESUME_CONTINUE                    = build_src_filter=+<src/gcode/lcd/M0_M1.cpp>
-LCD_SET_PROGRESS_MANUALLY              = build_src_filter=+<src/gcode/lcd/M73.cpp>
-HAS_STATUS_MESSAGE                     = build_src_filter=+<src/gcode/lcd/M117.cpp>
-HAS_LCD_CONTRAST                       = build_src_filter=+<src/gcode/lcd/M250.cpp>
-HAS_GCODE_M255                         = build_src_filter=+<src/gcode/lcd/M255.cpp>
-HAS_LCD_BRIGHTNESS                     = build_src_filter=+<src/gcode/lcd/M256.cpp>
-HAS_SOUND                              = build_src_filter=+<src/gcode/lcd/M300.cpp>
-TOUCH_SCREEN_CALIBRATION               = build_src_filter=+<src/gcode/lcd/M995.cpp>
-ARC_SUPPORT                            = build_src_filter=+<src/gcode/motion/G2_G3.cpp>
-GCODE_MOTION_MODES                     = build_src_filter=+<src/gcode/motion/G80.cpp>
-BABYSTEPPING                           = build_src_filter=+<src/gcode/motion/M290.cpp> +<src/feature/babystep.cpp>
-Z_PROBE_SLED                           = build_src_filter=+<src/gcode/probe/G31_G32.cpp>
-G38_PROBE_TARGET                       = build_src_filter=+<src/gcode/probe/G38.cpp>
-MAGNETIC_PARKING_EXTRUDER              = build_src_filter=+<src/gcode/probe/M951.cpp>
-SDSUPPORT                              = build_src_filter=+<src/sd/cardreader.cpp> +<src/sd/Sd2Card.cpp> +<src/sd/SdBaseFile.cpp> +<src/sd/SdFatUtil.cpp> +<src/sd/SdFile.cpp> +<src/sd/SdVolume.cpp> +<src/gcode/sd>
-HAS_MEDIA_SUBCALLS                     = build_src_filter=+<src/gcode/sd/M32.cpp>
-GCODE_REPEAT_MARKERS                   = build_src_filter=+<src/feature/repeat.cpp> +<src/gcode/sd/M808.cpp>
-HAS_EXTRUDERS                          = build_src_filter=+<src/gcode/units/M82_M83.cpp> +<src/gcode/temp/M104_M109.cpp> +<src/gcode/config/M221.cpp>
-HAS_TEMP_PROBE                         = build_src_filter=+<src/gcode/temp/M192.cpp>
-HAS_COOLER                             = build_src_filter=+<src/gcode/temp/M143_M193.cpp>
-AUTO_REPORT_TEMPERATURES               = build_src_filter=+<src/gcode/temp/M155.cpp>
-MPCTEMP                                = build_src_filter=+<src/gcode/temp/M306.cpp>
-INCH_MODE_SUPPORT                      = build_src_filter=+<src/gcode/units/G20_G21.cpp>
-TEMPERATURE_UNITS_SUPPORT              = build_src_filter=+<src/gcode/units/M149.cpp>
-NEED_HEX_PRINT                         = build_src_filter=+<src/libs/hex_print.cpp>
-NEED_LSF                               = build_src_filter=+<src/libs/least_squares_fit.cpp>
-NOZZLE_PARK_FEATURE                    = build_src_filter=+<src/libs/nozzle.cpp> +<src/gcode/feature/pause/G27.cpp>
-NOZZLE_CLEAN_FEATURE                   = build_src_filter=+<src/libs/nozzle.cpp> +<src/gcode/feature/clean>
-DELTA                                  = build_src_filter=+<src/module/delta.cpp> +<src/gcode/calibrate/M666.cpp>
-POLARGRAPH                             = build_src_filter=+<src/module/polargraph.cpp>
-BEZIER_CURVE_SUPPORT                   = build_src_filter=+<src/module/planner_bezier.cpp> +<src/gcode/motion/G5.cpp>
-PRINTCOUNTER                           = build_src_filter=+<src/module/printcounter.cpp>
-HAS_BED_PROBE                          = build_src_filter=+<src/module/probe.cpp> +<src/gcode/probe/G30.cpp> +<src/gcode/probe/M401_M402.cpp> +<src/gcode/probe/M851.cpp>
-IS_SCARA                               = build_src_filter=+<src/module/scara.cpp>
-HAS_SERVOS                             = build_src_filter=+<src/module/servo.cpp> +<src/gcode/control/M280.cpp>
-MORGAN_SCARA                           = build_src_filter=+<src/gcode/scara>
-HAS_MICROSTEPS                         = build_src_filter=+<src/gcode/control/M350_M351.cpp>
+                                         src_filter=+<src/lcd/dogm>
+HAS_(FSMC|SPI|LTDC)_TFT                = src_filter=+<src/HAL/STM32/tft> +<src/HAL/STM32F1/tft> +<src/lcd/tft_io>
+HAS_FSMC_TFT                           = src_filter=+<src/HAL/STM32/tft/tft_fsmc.cpp> +<src/HAL/STM32F1/tft/tft_fsmc.cpp>
+HAS_SPI_TFT                            = src_filter=+<src/HAL/STM32/tft/tft_spi.cpp> +<src/HAL/STM32F1/tft/tft_spi.cpp>
+I2C_EEPROM                             = src_filter=+<src/HAL/shared/eeprom_if_i2c.cpp>
+SOFT_I2C_EEPROM                        = SlowSoftI2CMaster, SlowSoftWire=https://github.com/felias-fogg/SlowSoftWire/archive/master.zip
+SPI_EEPROM                             = src_filter=+<src/HAL/shared/eeprom_if_spi.cpp>
+HAS_DWIN_E3V2|IS_DWIN_MARLINUI         = src_filter=+<src/lcd/e3v2/common>
+DWIN_CREALITY_LCD                      = src_filter=+<src/lcd/e3v2/creality>
+DWIN_LCD_PROUI                         = src_filter=+<src/lcd/e3v2/proui>
+DWIN_CREALITY_LCD_JYERSUI              = src_filter=+<src/lcd/e3v2/jyersui>
+IS_DWIN_MARLINUI                       = src_filter=+<src/lcd/e3v2/marlinui>
+HAS_GRAPHICAL_TFT                      = src_filter=+<src/lcd/tft>
+IS_TFTGLCD_PANEL                       = src_filter=+<src/lcd/TFTGLCD>
+HAS_TOUCH_BUTTONS                      = src_filter=+<src/lcd/touch/touch_buttons.cpp>
+HAS_MARLINUI_MENU                      = src_filter=+<src/lcd/menu>
+HAS_GAMES                              = src_filter=+<src/lcd/menu/game/game.cpp>
+MARLIN_BRICKOUT                        = src_filter=+<src/lcd/menu/game/brickout.cpp>
+MARLIN_INVADERS                        = src_filter=+<src/lcd/menu/game/invaders.cpp>
+MARLIN_MAZE                            = src_filter=+<src/lcd/menu/game/maze.cpp>
+MARLIN_SNAKE                           = src_filter=+<src/lcd/menu/game/snake.cpp>
+HAS_MENU_BACKLASH                      = src_filter=+<src/lcd/menu/menu_backlash.cpp>
+HAS_MENU_BED_CORNERS                   = src_filter=+<src/lcd/menu/menu_bed_corners.cpp>
+LCD_BED_LEVELING                       = src_filter=+<src/lcd/menu/menu_bed_leveling.cpp>
+HAS_MENU_CANCELOBJECT                  = src_filter=+<src/lcd/menu/menu_cancelobject.cpp>
+HAS_MENU_DELTA_CALIBRATE               = src_filter=+<src/lcd/menu/menu_delta_calibrate.cpp>
+HAS_MENU_FILAMENT                      = src_filter=+<src/lcd/menu/menu_filament.cpp>
+LCD_INFO_MENU                          = src_filter=+<src/lcd/menu/menu_info.cpp>
+HAS_MENU_JOB_RECOVERY                  = src_filter=+<src/lcd/menu/menu_job_recovery.cpp>
+HAS_MULTI_LANGUAGE                     = src_filter=+<src/lcd/menu/menu_language.cpp> +<src/gcode/lcd/M414.cpp>
+HAS_MENU_LED                           = src_filter=+<src/lcd/menu/menu_led.cpp>
+HAS_MENU_MEDIA                         = src_filter=+<src/lcd/menu/menu_media.cpp>
+HAS_MENU_MIXER                         = src_filter=+<src/lcd/menu/menu_mixer.cpp>
+HAS_MENU_MMU2                          = src_filter=+<src/lcd/menu/menu_mmu2.cpp>
+HAS_MENU_PASSWORD                      = src_filter=+<src/lcd/menu/menu_password.cpp>
+HAS_MENU_POWER_MONITOR                 = src_filter=+<src/lcd/menu/menu_power_monitor.cpp>
+HAS_MENU_CUTTER                        = src_filter=+<src/lcd/menu/menu_spindle_laser.cpp>
+HAS_MENU_TEMPERATURE                   = src_filter=+<src/lcd/menu/menu_temperature.cpp>
+HAS_MENU_TMC                           = src_filter=+<src/lcd/menu/menu_tmc.cpp>
+HAS_MENU_TOUCH_SCREEN                  = src_filter=+<src/lcd/menu/menu_touch_screen.cpp>
+HAS_MENU_TRAMMING                      = src_filter=+<src/lcd/menu/menu_tramming.cpp>
+HAS_MENU_UBL                           = src_filter=+<src/lcd/menu/menu_ubl.cpp>
+ANYCUBIC_LCD_CHIRON                    = src_filter=+<src/lcd/extui/anycubic_chiron>
+ANYCUBIC_LCD_I3MEGA                    = src_filter=+<src/lcd/extui/anycubic_i3mega>
+HAS_DGUS_LCD_CLASSIC                   = src_filter=+<src/lcd/extui/dgus>
+DGUS_LCD_UI_RELOADED                   = src_filter=+<src/lcd/extui/dgus_reloaded>
+DGUS_LCD_UI_FYSETC                     = src_filter=+<src/lcd/extui/dgus/fysetc>
+DGUS_LCD_UI_HIPRECY                    = src_filter=+<src/lcd/extui/dgus/hiprecy>
+DGUS_LCD_UI_MKS                        = src_filter=+<src/lcd/extui/dgus/mks>
+DGUS_LCD_UI_ORIGIN                     = src_filter=+<src/lcd/extui/dgus/origin>
+EXTUI_EXAMPLE                          = src_filter=+<src/lcd/extui/example>
+TOUCH_UI_FTDI_EVE                      = src_filter=+<src/lcd/extui/ftdi_eve_touch_ui>
+MALYAN_LCD                             = src_filter=+<src/lcd/extui/malyan>
+NEXTION_TFT                            = src_filter=+<src/lcd/extui/nextion>
+USE_UHS2_USB                           = src_filter=+<src/sd/usb_flashdrive/lib-uhs2>
+USE_UHS3_USB                           = src_filter=+<src/sd/usb_flashdrive/lib-uhs3>
+USB_FLASH_DRIVE_SUPPORT                = src_filter=+<src/sd/usb_flashdrive/Sd2Card_FlashDrive.cpp>
+HAS_MCP3426_ADC                        = src_filter=+<src/feature/adc> +<src/gcode/feature/adc>
+AUTO_BED_LEVELING_BILINEAR             = src_filter=+<src/feature/bedlevel/abl>
+AUTO_BED_LEVELING_(3POINT|(BI)?LINEAR) = src_filter=+<src/gcode/bedlevel/abl>
+X_AXIS_TWIST_COMPENSATION              = src_filter=+<src/feature/x_twist.cpp> +<src/lcd/menu/menu_x_twist.cpp> +<src/gcode/probe/M423.cpp>
+MESH_BED_LEVELING                      = src_filter=+<src/feature/bedlevel/mbl> +<src/gcode/bedlevel/mbl>
+AUTO_BED_LEVELING_UBL                  = src_filter=+<src/feature/bedlevel/ubl> +<src/gcode/bedlevel/ubl>
+UBL_HILBERT_CURVE                      = src_filter=+<src/feature/bedlevel/hilbert_curve.cpp>
+BACKLASH_COMPENSATION                  = src_filter=+<src/feature/backlash.cpp>
+BARICUDA                               = src_filter=+<src/feature/baricuda.cpp> +<src/gcode/feature/baricuda>
+BINARY_FILE_TRANSFER                   = src_filter=+<src/feature/binary_stream.cpp> +<src/libs/heatshrink>
+BLTOUCH                                = src_filter=+<src/feature/bltouch.cpp>
+CANCEL_OBJECTS                         = src_filter=+<src/feature/cancel_object.cpp> +<src/gcode/feature/cancel>
+CASE_LIGHT_ENABLE                      = src_filter=+<src/feature/caselight.cpp> +<src/gcode/feature/caselight>
+EXTERNAL_CLOSED_LOOP_CONTROLLER        = src_filter=+<src/feature/closedloop.cpp> +<src/gcode/calibrate/M12.cpp>
+USE_CONTROLLER_FAN                     = src_filter=+<src/feature/controllerfan.cpp>
+HAS_COOLER|LASER_COOLANT_FLOW_METER    = src_filter=+<src/feature/cooler.cpp>
+HAS_MOTOR_CURRENT_DAC                  = src_filter=+<src/feature/dac>
+DIRECT_STEPPING                        = src_filter=+<src/feature/direct_stepping.cpp> +<src/gcode/motion/G6.cpp>
+EMERGENCY_PARSER                       = src_filter=+<src/feature/e_parser.cpp> -<src/gcode/control/M108_*.cpp>
+EASYTHREED_UI                          = src_filter=+<src/feature/easythreed_ui.cpp>
+I2C_POSITION_ENCODERS                  = src_filter=+<src/feature/encoder_i2c.cpp>
+IIC_BL24CXX_EEPROM                     = src_filter=+<src/libs/BL24CXX.cpp>
+HAS_SPI_FLASH                          = src_filter=+<src/libs/W25Qxx.cpp>
+HAS_ETHERNET                           = src_filter=+<src/feature/ethernet.cpp> +<src/gcode/feature/network/M552-M554.cpp>
+HAS_FANCHECK                           = src_filter=+<src/feature/fancheck.cpp> +<src/gcode/temp/M123.cpp>
+HAS_FANMUX                             = src_filter=+<src/feature/fanmux.cpp>
+FILAMENT_WIDTH_SENSOR                  = src_filter=+<src/feature/filwidth.cpp> +<src/gcode/feature/filwidth>
+FWRETRACT                              = src_filter=+<src/feature/fwretract.cpp> +<src/gcode/feature/fwretract>
+HOST_ACTION_COMMANDS                   = src_filter=+<src/feature/host_actions.cpp>
+HOTEND_IDLE_TIMEOUT                    = src_filter=+<src/feature/hotend_idle.cpp>
+JOYSTICK                               = src_filter=+<src/feature/joystick.cpp>
+BLINKM                                 = src_filter=+<src/feature/leds/blinkm.cpp>
+HAS_COLOR_LEDS                         = src_filter=+<src/feature/leds/leds.cpp> +<src/gcode/feature/leds/M150.cpp>
+PCA9533                                = src_filter=+<src/feature/leds/pca9533.cpp>
+PCA9632                                = src_filter=+<src/feature/leds/pca9632.cpp>
+PRINTER_EVENT_LEDS                     = src_filter=+<src/feature/leds/printer_event_leds.cpp>
+TEMP_STAT_LEDS                         = src_filter=+<src/feature/leds/tempstat.cpp>
+MAX7219_DEBUG                          = src_filter=+<src/feature/max7219.cpp> +<src/gcode/feature/leds/M7219.cpp>
+HAS_MEATPACK                           = src_filter=+<src/feature/meatpack.cpp>
+MIXING_EXTRUDER                        = src_filter=+<src/feature/mixing.cpp> +<src/gcode/feature/mixing/M163-M165.cpp>
+HAS_PRUSA_MMU1                         = src_filter=+<src/feature/mmu/mmu.cpp>
+HAS_PRUSA_MMU2                         = src_filter=+<src/feature/mmu/mmu2.cpp> +<src/gcode/feature/prusa_MMU2>
+PASSWORD_FEATURE                       = src_filter=+<src/feature/password> +<src/gcode/feature/password>
+ADVANCED_PAUSE_FEATURE                 = src_filter=+<src/feature/pause.cpp> +<src/gcode/feature/pause/M600.cpp> +<src/gcode/feature/pause/M603.cpp>
+PSU_CONTROL                            = src_filter=+<src/feature/power.cpp>
+HAS_POWER_MONITOR                      = src_filter=+<src/feature/power_monitor.cpp> +<src/gcode/feature/power_monitor>
+POWER_LOSS_RECOVERY                    = src_filter=+<src/feature/powerloss.cpp> +<src/gcode/feature/powerloss>
+HAS_PTC                                = src_filter=+<src/feature/probe_temp_comp.cpp> +<src/gcode/calibrate/G76_M871.cpp>
+HAS_FILAMENT_SENSOR                    = src_filter=+<src/feature/runout.cpp> +<src/gcode/feature/runout>
+(EXT|MANUAL)_SOLENOID.*                = src_filter=+<src/feature/solenoid.cpp> +<src/gcode/control/M380_M381.cpp>
+MK2_MULTIPLEXER                        = src_filter=+<src/feature/snmm.cpp>
+HAS_CUTTER                             = src_filter=+<src/feature/spindle_laser.cpp> +<src/gcode/control/M3-M5.cpp>
+HAS_DRIVER_SAFE_POWER_PROTECT          = src_filter=+<src/feature/stepper_driver_safety.cpp>
+EXPERIMENTAL_I2CBUS                    = src_filter=+<src/feature/twibus.cpp> +<src/gcode/feature/i2c>
+G26_MESH_VALIDATION                    = src_filter=+<src/gcode/bedlevel/G26.cpp>
+ASSISTED_TRAMMING                      = src_filter=+<src/feature/tramming.cpp> +<src/gcode/bedlevel/G35.cpp>
+HAS_MESH                               = src_filter=+<src/gcode/bedlevel/G42.cpp>
+HAS_LEVELING                           = src_filter=+<src/gcode/bedlevel/M420.cpp> +<src/feature/bedlevel/bedlevel.cpp>
+MECHANICAL_GANTRY_CAL.+                = src_filter=+<src/gcode/calibrate/G34.cpp>
+Z_MULTI_ENDSTOPS|Z_STEPPER_AUTO_ALIGN  = src_filter=+<src/gcode/calibrate/G34_M422.cpp>
+Z_STEPPER_AUTO_ALIGN                   = src_filter=+<src/feature/z_stepper_align.cpp>
+DELTA_AUTO_CALIBRATION                 = src_filter=+<src/gcode/calibrate/G33.cpp>
+CALIBRATION_GCODE                      = src_filter=+<src/gcode/calibrate/G425.cpp>
+Z_MIN_PROBE_REPEATABILITY_TEST         = src_filter=+<src/gcode/calibrate/M48.cpp>
+M100_FREE_MEMORY_WATCHER               = src_filter=+<src/gcode/calibrate/M100.cpp>
+BACKLASH_GCODE                         = src_filter=+<src/gcode/calibrate/M425.cpp>
+IS_KINEMATIC                           = src_filter=+<src/gcode/calibrate/M665.cpp>
+HAS_EXTRA_ENDSTOPS                     = src_filter=+<src/gcode/calibrate/M666.cpp>
+SKEW_CORRECTION_GCODE                  = src_filter=+<src/gcode/calibrate/M852.cpp>
+DIRECT_PIN_CONTROL                     = src_filter=+<src/gcode/control/M42.cpp> +<src/gcode/control/M226.cpp>
+PINS_DEBUGGING                         = src_filter=+<src/gcode/config/M43.cpp>
+NO_VOLUMETRICS                         = src_filter=-<src/gcode/config/M200-M205.cpp>
+HAS_MULTI_EXTRUDER                     = src_filter=+<src/gcode/config/M217.cpp>
+HAS_HOTEND_OFFSET                      = src_filter=+<src/gcode/config/M218.cpp>
+EDITABLE_SERVO_ANGLES                  = src_filter=+<src/gcode/config/M281.cpp>
+PIDTEMP                                = src_filter=+<src/gcode/config/M301.cpp>
+PREVENT_COLD_EXTRUSION                 = src_filter=+<src/gcode/config/M302.cpp>
+PIDTEMPBED                             = src_filter=+<src/gcode/config/M304.cpp>
+HAS_USER_THERMISTORS                   = src_filter=+<src/gcode/config/M305.cpp>
+SD_ABORT_ON_ENDSTOP_HIT                = src_filter=+<src/gcode/config/M540.cpp>
+BAUD_RATE_GCODE                        = src_filter=+<src/gcode/config/M575.cpp>
+HAS_SMART_EFF_MOD                      = src_filter=+<src/gcode/config/M672.cpp>
+COOLANT_CONTROL|AIR_ASSIST             = src_filter=+<src/gcode/control/M7-M9.cpp>
+AIR_EVACUATION                         = src_filter=+<src/gcode/control/M10-M11.cpp>
+HAS_SOFTWARE_ENDSTOPS                  = src_filter=+<src/gcode/control/M211.cpp>
+SERVO_DETACH_GCODE                     = src_filter=+<src/gcode/control/M282.cpp>
+HAS_DUPLICATION_MODE                   = src_filter=+<src/gcode/control/M605.cpp>
+LIN_ADVANCE                            = src_filter=+<src/gcode/feature/advance>
+PHOTO_GCODE                            = src_filter=+<src/gcode/feature/camera>
+CONTROLLER_FAN_EDITABLE                = src_filter=+<src/gcode/feature/controllerfan>
+GCODE_MACROS                           = src_filter=+<src/gcode/feature/macro>
+GRADIENT_MIX                           = src_filter=+<src/gcode/feature/mixing/M166.cpp>
+HAS_SAVED_POSITIONS                    = src_filter=+<src/gcode/feature/pause/G60.cpp> +<src/gcode/feature/pause/G61.cpp>
+PARK_HEAD_ON_PAUSE                     = src_filter=+<src/gcode/feature/pause/M125.cpp>
+FILAMENT_LOAD_UNLOAD_GCODES            = src_filter=+<src/gcode/feature/pause/M701_M702.cpp>
+CNC_WORKSPACE_PLANES                   = src_filter=+<src/gcode/geometry/G17-G19.cpp>
+CNC_COORDINATE_SYSTEMS                 = src_filter=+<src/gcode/geometry/G53-G59.cpp>
+HAS_M206_COMMAND                       = src_filter=+<src/gcode/geometry/M206_M428.cpp>
+EXPECTED_PRINTER_CHECK                 = src_filter=+<src/gcode/host/M16.cpp>
+HOST_KEEPALIVE_FEATURE                 = src_filter=+<src/gcode/host/M113.cpp>
+AUTO_REPORT_POSITION                   = src_filter=+<src/gcode/host/M154.cpp>
+REPETIER_GCODE_M360                    = src_filter=+<src/gcode/host/M360.cpp>
+HAS_GCODE_M876                         = src_filter=+<src/gcode/host/M876.cpp>
+HAS_RESUME_CONTINUE                    = src_filter=+<src/gcode/lcd/M0_M1.cpp>
+LCD_SET_PROGRESS_MANUALLY              = src_filter=+<src/gcode/lcd/M73.cpp>
+HAS_STATUS_MESSAGE                     = src_filter=+<src/gcode/lcd/M117.cpp>
+HAS_LCD_CONTRAST                       = src_filter=+<src/gcode/lcd/M250.cpp>
+HAS_GCODE_M255                         = src_filter=+<src/gcode/lcd/M255.cpp>
+HAS_LCD_BRIGHTNESS                     = src_filter=+<src/gcode/lcd/M256.cpp>
+HAS_SOUND                              = src_filter=+<src/gcode/lcd/M300.cpp>
+TOUCH_SCREEN_CALIBRATION               = src_filter=+<src/gcode/lcd/M995.cpp>
+ARC_SUPPORT                            = src_filter=+<src/gcode/motion/G2_G3.cpp>
+GCODE_MOTION_MODES                     = src_filter=+<src/gcode/motion/G80.cpp>
+BABYSTEPPING                           = src_filter=+<src/gcode/motion/M290.cpp> +<src/feature/babystep.cpp>
+Z_PROBE_SLED                           = src_filter=+<src/gcode/probe/G31_G32.cpp>
+G38_PROBE_TARGET                       = src_filter=+<src/gcode/probe/G38.cpp>
+MAGNETIC_PARKING_EXTRUDER              = src_filter=+<src/gcode/probe/M951.cpp>
+SDSUPPORT                              = src_filter=+<src/sd/cardreader.cpp> +<src/sd/Sd2Card.cpp> +<src/sd/SdBaseFile.cpp> +<src/sd/SdFatUtil.cpp> +<src/sd/SdFile.cpp> +<src/sd/SdVolume.cpp> +<src/gcode/sd>
+HAS_MEDIA_SUBCALLS                     = src_filter=+<src/gcode/sd/M32.cpp>
+GCODE_REPEAT_MARKERS                   = src_filter=+<src/feature/repeat.cpp> +<src/gcode/sd/M808.cpp>
+HAS_EXTRUDERS                          = src_filter=+<src/gcode/units/M82_M83.cpp> +<src/gcode/temp/M104_M109.cpp> +<src/gcode/config/M221.cpp>
+HAS_TEMP_PROBE                         = src_filter=+<src/gcode/temp/M192.cpp>
+HAS_COOLER                             = src_filter=+<src/gcode/temp/M143_M193.cpp>
+AUTO_REPORT_TEMPERATURES               = src_filter=+<src/gcode/temp/M155.cpp>
+MPCTEMP                                = src_filter=+<src/gcode/temp/M306.cpp>
+INCH_MODE_SUPPORT                      = src_filter=+<src/gcode/units/G20_G21.cpp>
+TEMPERATURE_UNITS_SUPPORT              = src_filter=+<src/gcode/units/M149.cpp>
+NEED_HEX_PRINT                         = src_filter=+<src/libs/hex_print.cpp>
+NEED_LSF                               = src_filter=+<src/libs/least_squares_fit.cpp>
+NOZZLE_PARK_FEATURE                    = src_filter=+<src/libs/nozzle.cpp> +<src/gcode/feature/pause/G27.cpp>
+NOZZLE_CLEAN_FEATURE                   = src_filter=+<src/libs/nozzle.cpp> +<src/gcode/feature/clean>
+DELTA                                  = src_filter=+<src/module/delta.cpp> +<src/gcode/calibrate/M666.cpp>
+POLARGRAPH                             = src_filter=+<src/module/polargraph.cpp>
+BEZIER_CURVE_SUPPORT                   = src_filter=+<src/module/planner_bezier.cpp> +<src/gcode/motion/G5.cpp>
+PRINTCOUNTER                           = src_filter=+<src/module/printcounter.cpp>
+HAS_BED_PROBE                          = src_filter=+<src/module/probe.cpp> +<src/gcode/probe/G30.cpp> +<src/gcode/probe/M401_M402.cpp> +<src/gcode/probe/M851.cpp>
+IS_SCARA                               = src_filter=+<src/module/scara.cpp>
+HAS_SERVOS                             = src_filter=+<src/module/servo.cpp> +<src/gcode/control/M280.cpp>
+MORGAN_SCARA                           = src_filter=+<src/gcode/scara>
+HAS_MICROSTEPS                         = src_filter=+<src/gcode/control/M350_M351.cpp>
 (ESP3D_)?WIFISUPPORT                   = AsyncTCP, ESP Async WebServer
-                                         ESP3DLib=https://github.com/luc-github/ESP3DLib/archive/dc0f3d96c6.zip
+                                         ESP3DLib=https://github.com/luc-github/ESP3DLib/archive/master.zip
                                         arduinoWebSockets=links2004/WebSockets@2.3.4
                                         luc-github/ESP32SSDP@1.1.1
                                         lib_ignore=ESPAsyncTCP
--- a/ini/native.ini
+++ b/ini/native.ini
@@ -44,7 +44,7 @@ debug_build_flags = -fstack-protector-strong -g -g3 -ggdb
 lib_compat_mode   = off
 build_src_filter  = ${common.default_src_filter} +<src/HAL/NATIVE_SIM>
 lib_deps          = ${common.lib_deps}
-                    MarlinSimUI=https://github.com/p3p/MarlinSimUI/archive/8791f3ff43.zip
+                    MarlinSimUI=https://github.com/p3p/MarlinSimUI/archive/bugfix-2.0.x.zip
                    Adafruit NeoPixel=https://github.com/p3p/Adafruit_NeoPixel/archive/c6b319f447.zip
                    LiquidCrystal=https://github.com/p3p/LiquidCrystal/archive/322fb5fc23.zip
 extra_scripts     = ${common.extra_scripts}
--- a/ini/stm32-common.ini
+++ b/ini/stm32-common.ini
@@ -35,8 +35,7 @@ extra_scripts = ${common_stm32.extra_scripts}
 # USB Flash Drive mix-ins for STM32
 #
 [stm_flash_drive]
-# Arduino_Core_STM32 uses usb-host-msc-cdc-msc-3 branch
-platform_packages = framework-arduinoststm32@https://github.com/rhapsodyv/Arduino_Core_STM32/archive/39f37d6d6a.zip
+platform_packages = framework-arduinoststm32@https://github.com/rhapsodyv/Arduino_Core_STM32/archive/usb-host-msc-cdc-msc-3.zip
 build_flags       = ${common_stm32.build_flags}
                    -DHAL_PCD_MODULE_ENABLED -DHAL_HCD_MODULE_ENABLED
                    -DUSBHOST -DUSBH_IRQ_PRIO=3 -DUSBH_IRQ_SUBPRIO=4
--- a/ini/stm32f4.ini
+++ b/ini/stm32f4.ini
@@ -621,7 +621,7 @@ extra_scripts     = ${common_stm32.extra_scripts}
 #
 # Ender-3 S1 STM32F401RC_creality
 #
-[STM32F401RC_creality_base]
+[env:STM32F401RC_creality]
 extends                     = stm32_variant
 board                       = genericSTM32F401RC
 board_build.variant         = MARLIN_CREALITY_STM32F401RC
@@ -635,18 +635,6 @@ extra_scripts               = ${stm32_variant.extra_scripts}
                              pre:buildroot/share/PlatformIO/scripts/random-bin.py
 monitor_speed               = 115200

-[env:STM32F401RC_creality]
-extends                     = STM32F401RC_creality_base
-board_build.offset          = 0x10000
-board_upload.offset_address = 0x08010000
-
-[env:STM32F401RC_creality_nobootloader]
-extends                     = STM32F401RC_creality_base
-board_build.offset          = 0x0000
-board_upload.offset_address = 0x08000000
-debug_tool                  = stlink
-upload_protocol             = stlink
-
 [env:STM32F401RC_creality_jlink]
 extends                     = env:STM32F401RC_creality
 debug_tool                  = jlink
--- a/ini/stm32g0.ini
+++ b/ini/stm32g0.ini
@@ -25,8 +25,7 @@
 [env:STM32G0B1RE_btt]
 extends                     = stm32_variant
 platform                    = ststm32@~14.1.0
-platform_packages           = framework-arduinoststm32@~4.20600.231001
-                              toolchain-gccarmnoneeabi@1.100301.220327
+platform_packages           = framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32/archive/main.zip
 board                       = marlin_STM32G0B1RE
 board_build.offset          = 0x2000
 board_upload.offset_address = 0x08002000
--- a/ini/stm32h7.ini
+++ b/ini/stm32h7.ini
@@ -24,8 +24,7 @@
 #
 [env:BTT_SKR_SE_BX]
 extends            = stm32_variant
-# framework-arduinoststm32 uses biqu-bx-workaround branch
-platform_packages  = framework-arduinoststm32@https://github.com/thisiskeithb/Arduino_Core_STM32/archive/8b3522051a.zip
+platform_packages  = framework-arduinoststm32@https://github.com/thisiskeithb/Arduino_Core_STM32/archive/biqu-bx-workaround.zip
 board              = marlin_BTT_SKR_SE_BX
 board_build.offset = 0x20000
 build_flags        = ${stm32_variant.build_flags} ${stm_flash_drive.build_flags}
@@ -46,17 +45,17 @@ debug_tool         = cmsis-dap
 [env:STM32H743Vx_btt]
 extends                     = stm32_variant
 platform                    = ststm32@~14.1.0
-platform_packages           = framework-arduinoststm32@~4.20600.231001
+platform_packages           = framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32/archive/main.zip
 board                       = marlin_STM32H743Vx
 board_build.offset          = 0x20000
 board_upload.offset_address = 0x08020000
 build_flags                 = ${stm32_variant.build_flags}
-                              -DPIN_SERIAL1_RX=PA_10 -DPIN_SERIAL1_TX=PA_9
-                              -DPIN_SERIAL3_RX=PD_9 -DPIN_SERIAL3_TX=PD_8
-                              -DPIN_SERIAL4_RX=PA_1 -DPIN_SERIAL4_TX=PA_0
-                              -DSERIAL_RX_BUFFER_SIZE=1024 -DSERIAL_TX_BUFFER_SIZE=1024
-                              -DTIMER_SERVO=TIM5 -DTIMER_TONE=TIM2
-                              -DSTEP_TIMER_IRQ_PRIO=0
-                              -DD_CACHE_DISABLED
+                            -DPIN_SERIAL1_RX=PA_10 -DPIN_SERIAL1_TX=PA_9
+                            -DPIN_SERIAL3_RX=PD_9 -DPIN_SERIAL3_TX=PD_8
+                            -DPIN_SERIAL4_RX=PA_1 -DPIN_SERIAL4_TX=PA_0
+                            -DSERIAL_RX_BUFFER_SIZE=1024 -DSERIAL_TX_BUFFER_SIZE=1024
+                            -DTIMER_SERVO=TIM5 -DTIMER_TONE=TIM2
+                            -DSTEP_TIMER_IRQ_PRIO=0
+                            -DD_CACHE_DISABLED
 upload_protocol             = cmsis-dap
 debug_tool                  = cmsis-dap
Author	SHA1	Message	Date
thinkyhead	ea0ac46a7d	[cron] Bump distribution date (2025-05-27)	2025-05-27 00:35:09 +00:00
Scott Lahteine	75b4b474e9	🔨 Update Simulator build	2025-05-26 13:35:07 -05:00
thinkyhead	70c5bca8c2	[cron] Bump distribution date (2023-04-16)	2023-04-16 06:07:32 +00:00
Scott Lahteine	bb4a01c4f9	🔨 Newer PlatformIO support	2023-04-15 22:27:40 -05:00
Scott Lahteine	06a6708220	🧑‍💻 Update Python indentation	2023-04-15 22:27:40 -05:00
ellensp	e3d1bd6d97	🩹 Add missing FORCE_SOFT_SPI (#24940 )	2023-04-15 22:27:40 -05:00
thinkyhead	031bc6adb9	[cron] Bump distribution date (2023-04-08)	2023-04-08 00:18:54 +00:00
ellensp	a6cc7a4f35	🩹 Add missing FORCE_SOFT_SPI (#24940 )	2022-11-13 22:42:36 -06:00
Scott Lahteine	4f9fbcee2b	🐛 Fix recalculate_max_e_jerk	2022-11-09 20:55:20 -06:00
Moonglow	d1211b9f90	🩹 Fix M907 "extra axis" limit (#24559 )	2022-07-29 19:37:42 -05:00
Scott Lahteine	d5699dd5c0	🚑️ Fix XYZEval = N not setting E	2022-07-29 18:41:23 -05:00
Scott Lahteine	79bd1a68c7	🧑‍💻 Further script updates	2022-07-29 08:33:08 -05:00
Scott Lahteine	0922702504	🧑‍💻 Axis macros parity with 2.1.x	2022-07-29 08:33:08 -05:00
Miguel Risco-Castillo	2bf631c6cc	🚸 Fix, update ProUI (#24251 , #24473 , #24500 )	2022-07-29 08:16:20 -05:00
Scott Lahteine	9a0d0e7ef1	♻️ Small sound / buzz refactor (#24520 )	2022-07-29 07:10:59 -05:00
Keith Bennett	3fab4898e4	👷 CI for bugfix-2.0.x, updates (#24560 )	2022-07-29 06:12:38 -05:00
tombrazier	eee8f11849	⚡️ Optimize Planner calculations (#24484 , #24509 )	2022-07-29 05:54:17 -05:00
tombrazier	096bea208e	⚡️ Optimize G2-G3 Arcs (#24366 )	2022-07-29 05:40:40 -05:00
Scott Lahteine	daa7ee6c6a	🩹 Revert extra axis changes	2022-07-29 05:40:40 -05:00
Scott Lahteine	09cc5473b5	🧑‍💻 Fix and improve build_all_examples	2022-07-29 05:06:58 -05:00
Scott Lahteine	5ccaf1d233	🧑‍💻 Add Sim debug with lldb	2022-07-29 04:56:28 -05:00
ellensp	78789ee11d	📺 SKR_MINI_SCREEN_ADAPTER for BTT SKR Mini E3 V3 (#24521 )	2022-07-29 04:52:14 -05:00
Keith Bennett	39f6ae0e3c	📝 Update board MCU comments (#24486 )	2022-07-29 04:24:11 -05:00
InsanityAutomation	3441e917bc	🚸 Machine-relative Z_STEPPER_ALIGN_XY (#24261 ) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>	2022-07-29 04:24:11 -05:00
Scott Lahteine	9ba4c58595	🧑‍💻 Fix MAP macro use Followup to #24191	2022-07-29 04:24:11 -05:00
ellensp	a720b1a335	🩹 Fix G60/G61 debug code (#24231 )	2022-07-29 04:24:11 -05:00
lujios	799b8fccaf	🩹 Fix G33 Delta Sensorless Probing compile (#24291 )	2022-07-29 04:24:11 -05:00
Scott Lahteine	69a1c539fb	🩹 Apply linearval in M600	2022-07-29 04:24:11 -05:00
Keith Bennett	6904e31e54	🔧 Assert Probe Temp Comp requirements (#24468 )	2022-07-29 04:24:11 -05:00
ellensp	407c32563b	🐛 Fix BACKLASH_COMPENSATION compile (#24072 ) Followup to #23826	2022-07-29 04:24:11 -05:00
Scott Lahteine	0281459093	🎨 Misc. 6-axis cleanup	2022-07-29 04:24:11 -05:00
Scott Lahteine	0ef496df2b	📝 Note about UBL bad splits	2022-07-29 04:24:11 -05:00
Pauli Jokela	9c2d0f47fb	🩹 Fix safe homing sanity-check (#24462 )	2022-07-29 04:24:11 -05:00
Scott Lahteine	cd9a23c4d0	🎨 Fix comments, formatting	2022-07-29 04:24:11 -05:00
Christophe Huriaux	ab346f24ca	🩹 Fix ST7565 LCD contrast init (#24457 )	2022-07-29 04:24:11 -05:00
Mike La Spina	5ee7e3ffa4	🐛 Fix laser/fan sync (#24460 ) Followup to #22690, `307dfb15`	2022-07-29 04:24:11 -05:00
Scott Lahteine	32765c600a	🩹 Fix TFT image packing	2022-07-29 04:24:11 -05:00
DerAndere	602e14704b	🚸 Better M350, M114 with more axes (#23986 ) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>	2022-07-29 04:24:11 -05:00
toomuchwonder	0ad83e0af5	🩹 Fix MKS UI extruder speed (#24476 )	2022-07-29 04:24:10 -05:00
Miguel Risco-Castillo	9bd39749d7	🚸 Fix and update ProUI (#24477 )	2022-07-29 04:24:10 -05:00
InsanityAutomation	ce5497218a	🐛 Fix Archim2 USB Hang (#24314 )	2022-07-29 04:24:10 -05:00
Scott Lahteine	ca06ec9abb	🎨 Misc. 'else' cleanup	2022-07-29 04:24:10 -05:00
Scott Lahteine	cf1e4df51b	🩹 Fix MAX31865 approximations Followup to #24407	2022-07-29 04:24:10 -05:00
Scott Lahteine	38391eb116	🩹 Fix manual move titles (#24518 )	2022-07-29 04:24:10 -05:00
Scott Lahteine	03b50354cb	🏗️ Extend AXIS_CHAR to include E Co-Authored-By: DerAndere <26200979+DerAndere1@users.noreply.github.com>	2022-07-29 04:24:10 -05:00
kisslorand	ceeb6c646b	Fix axis string 'N' (#24259 ) Followup to `167672d`	2022-07-29 02:40:12 -05:00
Ludy	20f79e290f	🌐 Update German language (#24555 )	2022-07-27 22:11:49 -05:00
Scott Lahteine	5ecf3f876c	🧑‍💻 Update planner/stepper includes	2022-07-27 22:10:00 -05:00
Scott Lahteine	dee41990cc	🩹 Fix lcd_preheat compile	2022-07-27 22:09:41 -05:00
Scott Lahteine	94a8b70ce3	🔨 Update build/CI scripts	2022-07-27 22:08:38 -05:00
Scott Lahteine	b2101b9928	🎨 PIO scripts cleanup	2022-07-27 22:05:52 -05:00
Keith Bennett	976ac28be5	📺 Fix TFT Classic UI non-Touchscreen 1024x600 (#24541 )	2022-07-27 22:04:58 -05:00
Keith Bennett	b0b340aab9	📝 Update MPCTEMP G-Code M306 T (#24535 ) M306 simply reports current values. M306 T starts autotune process.	2022-07-27 21:49:09 -05:00
Scott Lahteine	1ceac4a9fe	📝 Update Driver Type comments	2022-07-23 19:43:50 -05:00
Scott Lahteine	a8046d2a95	🎨 Clean up extra axes Followup to #24120	2022-07-23 19:14:57 -05:00
Scott Lahteine	c6f2be637c	EXP header pin numbers redux (#24525 ) Followup to `504fec98`	2022-07-23 18:53:47 -05:00
tombrazier	30da489f1c	🐛 Fix 2d mesh print (#24536 )	2022-07-22 23:34:16 -05:00
Scott Lahteine	a540c58a2d	🔧 Config parity with 2.1.x	2022-07-17 22:25:51 -05:00
Scott Lahteine	e52298db35	🔨 Add mftest --default flag	2022-07-16 23:55:25 -05:00
Arthur Masson	31c350d55e	✨ Polargraph M665 settings (#24401 )	2022-07-16 23:55:25 -05:00
Scott Lahteine	d50a3129e2	🚸 Renumber EXP pins to match schematics/RRF/Klipper	2022-07-16 23:55:25 -05:00
Scott Lahteine	614f54622a	🔖 Configuration version 02000905	2022-07-16 23:55:25 -05:00
Christophe Huriaux	f89bb65220	✨ eMotion-Tech eMotronic (Micro-Delta rework) (#24488 )	2022-07-16 23:30:52 -05:00
Scott Lahteine	284b35d120	🔨 Fix and update Makefile Followup to `89fe5f6d`	2022-07-16 23:30:52 -05:00
Victor Oliveira	fe5e941d92	✨ Creality3D v4.2.5 / CR200B (#24491 )	2022-07-16 23:30:52 -05:00
Keith Bennett	80cc5f0413	✨ MKS Monster8 V2 (#24483 )	2022-07-16 23:30:52 -05:00
Scott Lahteine	0595a55700	🐛 Fix SDIO for STM32 (#24470 ) Followup to #24271	2022-07-16 23:30:52 -05:00
Jason Smith	2535ce2a26	🩹 Fix LCD_BACKLIGHT_TIMEOUT compile (#24463 )	2022-07-16 23:30:52 -05:00
Mike La Spina	777af4b6c4	⚡️ Fix and improve Inline Laser Power (#22690 )	2022-07-16 23:30:52 -05:00
Keith Bennett	b1162d97eb	✨ BigTreeTech SKR SE BX V3.0 (#24449 ) SKR SE BX V3.0 removes the Reverse Driver Protection feature.	2022-07-16 23:30:52 -05:00
tombrazier	e70c350b3d	💥 More M306 M => M306 H (#24258 ) Followup to #24253	2022-07-16 23:30:52 -05:00
Keith Bennett	ff516e257b	🎨 Fix/adjust warnings (#24225 , #24404 )	2022-07-16 23:30:52 -05:00
Scott Lahteine	41269e9c2b	🧑‍💻 Forward-compatible axis strings	2022-07-16 23:30:52 -05:00
DerAndere	091b0f9664	💥 Update Motor Current G-codes for extra axes (#23975 )	2022-07-16 23:30:52 -05:00
DerAndere	dc04f61adc	🩹 Fix some parameters w/out values (#24051 )	2022-07-16 22:37:40 -05:00
Scott Lahteine	eb25530ba8	🏗️ Axis name arrays Co-Authored-By: DerAndere <26200979+DerAndere1@users.noreply.github.com>	2022-07-16 22:37:40 -05:00
Scott Lahteine	6133ca2d68	♻️ More updates for multi-axis	2022-07-16 22:37:40 -05:00
GHGiampy	5a46b900d8	🔨 Fix firmware upload (#24499 )	2022-07-16 17:22:10 -05:00
Scott Lahteine	b09997d137	🔨 PlatformIO "--target upload" == "--target exec"	2022-07-16 17:22:10 -05:00
Scott Lahteine	7dc3cfa1a6	♻️ Encapsulate PID in class (#24389 )	2022-07-16 17:22:10 -05:00
Victor Oliveira	93144f1e7d	🔨 Disable stack protector on macOS simulator (#24443 )	2022-07-16 17:22:10 -05:00
Eduard Sukharev	5e215fa3c4	🐛 Fix MKS TinyBee compile (#24454 )	2022-07-16 17:22:10 -05:00
EvilGremlin	2bdc5a78ad	🔨 Fix OpenBLT encode; no-bootloader envs (#24446 )	2022-07-16 17:22:10 -05:00
Scott Lahteine	cd06d5f34f	🔨 Fix Warnings.cpp force-recompile	2022-07-16 17:22:10 -05:00
Scott Lahteine	72f341b4bc	🎨 ANY => EITHER	2022-07-13 21:24:30 -05:00
Keith Bennett	9a4cfe4940	🚸 MPCTEMP: Home before cooling (#24434 )	2022-07-04 00:30:02 -05:00
Keith Bennett	4a9ecdd70b	🩹 Fix MKS TinyBee ADC Vref (#24432 )	2022-07-04 00:30:02 -05:00
Scott Lahteine	160762742a	🩹 Remove poison wchar_t macro	2022-07-04 00:30:02 -05:00
Scott Lahteine	95b0ee2fbf	🩹 Remove obsolete split_move	2022-07-01 21:17:21 -05:00
Moonglow	505ae61b8d	🐛 Fix M149 (#24430 )	2022-06-30 22:00:52 -05:00
Scott Lahteine	5660c3b189	📝 Index Mobo Rev03 => Opulo Lumen Rev3	2022-06-30 22:00:52 -05:00
Scott Lahteine	470512dd50	🩹 Fix memset block warning	2022-06-30 22:00:52 -05:00
Keith Bennett	310a76444d	🐛 Fix Axis Homing (#24425 ) Followup to `4520a51`	2022-06-30 22:00:52 -05:00
John Lagonikas	ea630bbed7	🐛 Fix MAX31865 PT1000 normalization (#24407 ) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>	2022-06-30 22:00:52 -05:00
Scott Lahteine	15915ede53	♻️ reset_acceleration_rates => refresh_…	2022-06-30 22:00:52 -05:00
Scott Lahteine	a68aa255bc	♻️ Planner flags refactor	2022-06-30 22:00:52 -05:00
lujios	b3fe059f6c	⚡️ Improve Sensorless homing/probing accuracy for G28, G33, M48 (#24220 ) Co-Authored-By: Robby Candra <robbycandra.mail@gmail.com> Co-Authored-By: ellensp <530024+ellensp@users.noreply.github.com>	2022-06-30 22:00:52 -05:00
elimisback	b938d99b32	🔨 BTT STM32G0B1RE xfer build (#24245 )	2022-06-30 22:00:52 -05:00
Scott Lahteine	b01caf0afe	🎨 Minimize block->steps.set	2022-06-30 22:00:52 -05:00
DerAndere	088fa84b7f	♻️ More updates for multi-axis Based on #23112 Co-Authored-By: Scott Lahteine <thinkyhead@users.noreply.github.com>	2022-06-30 22:00:52 -05:00
Scott Lahteine	74339bfefc	🚨 Fix some compiler warnings	2022-06-30 22:00:52 -05:00
Scott Lahteine	40fa85b92e	🐛 Fix types.h macros and fields Fixes #24419	2022-06-29 13:05:16 -05:00
Scott Lahteine	1c3d5827e6	🎨 Misc. shorthand operators	2022-06-26 10:02:15 -05:00
Scott Lahteine	0567d613ba	🐛 Fix Manual Move axis selection (#24404 )	2022-06-26 06:45:47 -05:00
Shlee	3bf100301a	📝 Add STM32F4 example, Ruby (#24399 )	2022-06-26 06:43:49 -05:00
Giuliano Zaro	f1483e76a1	🌐 Update Italian language (#24398 )	2022-06-26 06:43:49 -05:00
Roman Moravčík	9efccbf23e	🌐 Update Slovak language (#24397 )	2022-06-26 06:43:49 -05:00
sgparry	fe86ff2d53	🩹 Fix LCD contrast with K8800 board	2022-06-26 06:43:49 -05:00
Scott Lahteine	f6e248df6e	🌐 Drop unused delta strings	2022-06-24 22:09:42 -05:00
Scott Lahteine	6d1ce46dd1	🧑‍💻 Fix STATIC_ITEM_N arg order	2022-06-24 01:39:40 -05:00
Scott Lahteine	341bf27d1d	✏️ 9-axis followup fixing G2-G3 arcs	2022-06-24 01:39:40 -05:00
tombrazier	0698fcb005	🩹 Fix Mesh Leveling + Debug compile (#24297 )	2022-06-24 01:39:40 -05:00
John Robertson	d725998340	⚡️ PWM for ESP32 I2S expander (#24193 )	2022-06-24 01:25:17 -05:00
Bob Kuhn	2f814079d8	🐛 Fix Lerdge build / encrypt (#24391 ) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>	2022-06-24 00:07:38 -05:00
Victor Oliveira	a3876c5896	✨ Classic UI BIQU BX (#24387 )	2022-06-24 00:07:24 -05:00
ellensp	7497890f04	🩹 Fix DGUS (MKS) compile (#24378 )	2022-06-24 00:07:04 -05:00
Victor Oliveira	b16a32e7ce	🚑️ Fix BIQU BX touch freeze (#24383 )	2022-06-24 00:06:35 -05:00
ellensp	052a64052b	🐛 Fix M423 invocation (#24360 ) Followup to #23745	2022-06-24 00:06:20 -05:00
tombrazier	4648ade0e6	🩹 LCD strings followup, fix warning (#24328 )	2022-06-24 00:06:06 -05:00
InsanityAutomation	a67dd76db4	🐛 Resolve DUE Servo pulse issue (#24305 ) Co-authored-by: sjasonsmith <20053467+sjasonsmith@users.noreply.github.com> Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>	2022-06-24 00:04:01 -05:00
ellensp	47b8671836	🚑️ Fix SD mount bug (#24319 ) Co-authored-by: Scott Lahteine <github@thinkyhead.com>	2022-06-24 00:01:36 -05:00
Scott Lahteine	f04efa85cd	🎨 Simplify move menus with substitution	2022-06-22 05:55:38 -05:00
Scott Lahteine	5b2b08d048	🎨 Use MAP for home axis items	2022-06-22 05:55:38 -05:00
Scott Lahteine	3f9869a6c1	🧑‍💻 Fix STATIC_ITEM_N arg order	2022-06-22 05:55:38 -05:00
Scott Lahteine	65490f27c4	🎨 Fix comments, formatting	2022-06-22 05:37:38 -05:00
luzpaz	1afb80d45d	🌐 Fix LCD string, typos (#24324 )	2022-06-22 05:37:38 -05:00
tombrazier	6a20b1271d	🐛 Fix G2/G3 Arcs stutter / JD speed (#24362 )	2022-06-22 05:37:38 -05:00
ellensp	733e5f3957	👷 CI test without src filter (emulate Arduino) (#24335 )	2022-06-22 05:37:38 -05:00
Keith Bennett	031633cde6	👷 Use Biqu BX for CI test (#24331 )	2022-06-22 05:37:38 -05:00
Scott Lahteine	5149eed13c	🧑‍💻 MAP macro for axis lists, etc. (#24191 )	2022-06-22 05:37:38 -05:00
Scott Lahteine	2ecaebeab2	🧑‍💻 Apply F() to some LCD / TFT strings Followup to #24228	2022-06-13 21:01:55 -05:00
ellensp	047ecc5995	🩹 Fix missing ProUI cpp wrapper (#24313 )	2022-06-13 21:01:55 -05:00
ellensp	2268e1417b	🐛 Fix JGAurora A5S A1 build (#24326 )	2022-06-13 04:30:00 -05:00
Steven Haigh	3fa767f533	🩹 Fix ProUI compile (#24310 ) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>	2022-06-13 04:29:40 -05:00
Scott Lahteine	9860580bed	🧑‍💻 Misc. servo code cleanup	2022-06-13 04:29:24 -05:00
Scott Lahteine	6df193a5d1	🧑‍💻 Remove servo macros	2022-06-13 04:29:04 -05:00
ellensp	e5fb6ace4c	🩹 Media Change followup (#24302 ) Followup to #24015	2022-06-07 01:59:58 -05:00
Scott Lahteine	b659bb2a52	👔 Fix and comment use_example_configs	2022-06-06 19:13:26 -05:00
Miguel Risco-Castillo	7e27f06364	🚸 ProUI G-code preview, PID plot (#24282 )	2022-06-06 00:01:26 -05:00
Scott Lahteine	72346e80fa	🔖 Repurpose as bugfix for 2.0.9.4	2022-06-05 23:56:18 -05:00