🔧 Update settings sections (#28240)

Marlin/Configuration.h

@@ -61,7 +61,7 @@
 // @section info
 
 // Author info of this build printed to the host during boot and M115
-#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Original author or contributor.
+#define STRING_CONFIG_H_AUTHOR "(MarlinFirmware)" // Original author or contributor.
 //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
 
 // @section machine
@@ -468,7 +468,7 @@
 //===========================================================================
 //============================= Thermal Settings ============================
 //===========================================================================
-// @section temperature
+// @section temperature sensors
 
 /**
  * Temperature Sensors:
@@ -652,6 +652,8 @@
   #define TEMP_SENSOR_REDUNDANT_MAX_DIFF  10  // (°C) Temperature difference that will trigger a print abort.
 #endif
 
+// @section temperature
+
 // Below this temperature the heater will be switched off
 // because it probably indicates a broken thermistor wire.
 #define HEATER_0_MINTEMP   5
@@ -1860,15 +1862,12 @@
 //#define DISABLE_V
 //#define DISABLE_W
 
-// Turn off the display blinking that warns about possible accuracy reduction
-//#define DISABLE_REDUCED_ACCURACY_WARNING
-
 // @section extruder
 
 //#define DISABLE_E               // Disable the extruder when not stepping
 #define DISABLE_OTHER_EXTRUDERS   // Keep only the active extruder enabled
 
-// @section motion
+// @section stepper drivers
 
 // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
 #define INVERT_X_DIR false
@@ -1881,8 +1880,6 @@
 //#define INVERT_V_DIR false
 //#define INVERT_W_DIR false
 
-// @section extruder
-
 // For direct drive extruder v9 set to true, for geared extruder set to false.
 #define INVERT_E0_DIR false
 #define INVERT_E1_DIR false
@@ -2527,7 +2524,7 @@
 //
 //#define TEMPERATURE_UNITS_SUPPORT
 
-// @section temperature
+// @section temperature presets
 
 //
 // Preheat Constants - Up to 10 are supported without changes

Marlin/Configuration_adv.h

@@ -1526,6 +1526,9 @@
 
 // @section lcd
 
+// Turn off the display blinking that warns about possible accuracy reduction
+//#define DISABLE_REDUCED_ACCURACY_WARNING
+
 #if HAS_MANUAL_MOVE_MENU
   #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
   #define FINE_MANUAL_MOVE 0.025    // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
@@ -2355,7 +2358,7 @@
   //#define WATCHDOG_RESET_MANUAL
 #endif
 
-// @section lcd
+// @section baby-stepping
 
 /**
  * Babystepping enables movement of the axes by tiny increments without changing
@@ -2608,13 +2611,15 @@
   #endif
 #endif // PTC_PROBE || PTC_BED || PTC_HOTEND
 
-// @section extras
+// @section gcode
 
 //
 // G60/G61 Position Save and Return
 //
 //#define SAVED_POSITIONS 1         // Each saved position slot costs 12 bytes
 
+// @section motion
+
 //
 // G2/G3 Arc Support
 //
@@ -2646,6 +2651,8 @@
  */
 //#define DIRECT_STEPPING
 
+// @section calibrate
+
 /**
  * G38 Probe Target
  *
@@ -2852,7 +2859,7 @@
  */
 //#define EXTRA_FAN_SPEED
 
-// @section gcode
+// @section firmware retraction
 
 /**
  * Firmware-based and LCD-controlled retract

Marlin/src/inc/Warnings.cpp

@@ -799,7 +799,7 @@
 
 #if ANY(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) && DISABLED(RGB_LED)
   #warning "Your FYSETC Mini Panel works best with RGB_LED."
-#elif ANY(FYSETC_MINI_12864_2_0, FYSETC_MINI_12864_2_1) && DISABLED(LED_USER_PRESET_STARTUP)
+#elif ENABLED(FYSETC_MINI_12864_2_0) && DISABLED(LED_USER_PRESET_STARTUP)
   #warning "Your FYSETC/MKS/BTT/BEEZ Mini Panel works best with LED_USER_PRESET_STARTUP."
 #endif