Mirrors/Maixduino
2
0
Fork 0
mirror of https://github.com/sipeed/Maixduino.git synced 2026-03-03 00:53:59 +01:00
Code Issues Packages Projects Releases Wiki Activity

New boards added

Browse Source
This commit is contained in:
UT2UH
2020-11-02 21:05:00 +02:00
parent a256706b7f
commit 1376ced183
15 changed files with 1600 additions and 194 deletions
Download Patch File Download Diff File Expand all files Collapse all files

396
boards.txt
View File

@@ -3,10 +3,243 @@ menu.burn_tool_firmware=Burn Tool Firmware
menu.burn_baudrate=Burn Baud Rate
menu.toolsloc=Tool Install Location
##################################################
############# Sipeed Maix Amigo ###############
amigo.name=Sipeed Maix Amigo
## Toolchain
amigo.menu.toolsloc.default=Default
amigo.menu.toolsloc.default.compiler.path={runtime.tools.riscv64-unknown-elf-gcc.path}/bin/
## CPU Clock
amigo.menu.clksrc.400=400MHz CPU Clock Frequency
amigo.menu.clksrc.500=500MHz CPU Clock Frequency
amigo.menu.clksrc.600=600MHz CPU Clock Frequency
amigo.menu.clksrc.400.build.f_cpu=400000000L
amigo.menu.clksrc.500.build.f_cpu=500000000L
amigo.menu.clksrc.600.build.f_cpu=600000000L
## Burn baud rate
amigo.menu.burn_baudrate.2000000=2 Mbps
amigo.menu.burn_baudrate.4500000=4.5 Mbps (Must open-ec!)
amigo.menu.burn_baudrate.1500000=1.5 Mbps
amigo.menu.burn_baudrate.1000000=1 Mbps
amigo.menu.burn_baudrate.2000000.build.burn_baudrate=2000000
amigo.menu.burn_baudrate.4500000.build.burn_baudrate=4500000
amigo.menu.burn_baudrate.1500000.build.burn_baudrate=1500000
amigo.menu.burn_baudrate.1000000.build.burn_baudrate=1000000
## Burn tool firmware
amigo.menu.burn_tool_firmware.amigo=open-ec
amigo.menu.burn_tool_firmware.amigo.build.burn_tool_firmware=goE
## Core settings
amigo.build.variant=sipeed_maix_amigo
amigo.build.core=arduino
## This sets a define for use in the compiled code.
amigo.build.board=MAIX_AMIGO
## This selects the tool from "programmers.txt"
amigo.program.tool=kflash
amigo.upload.tool=kflash
## Limit is the 16MB Flash. Assume half is used for something else.
amigo.upload.maximum_size=8388608
amigo.build.ldscript="{runtime.platform.path}/cores/arduino/kendryte-standalone-sdk/lds/kendryte.ld"
##################################################
############# Sipeed Maix Cube ###############
cube.name=Sipeed Maix Cube
## Toolchain
cube.menu.toolsloc.default=Default
cube.menu.toolsloc.default.compiler.path={runtime.tools.riscv64-unknown-elf-gcc.path}/bin/
## CPU Clock
cube.menu.clksrc.400=400MHz CPU Clock Frequency
cube.menu.clksrc.500=500MHz CPU Clock Frequency
cube.menu.clksrc.600=600MHz CPU Clock Frequency
cube.menu.clksrc.400.build.f_cpu=400000000L
cube.menu.clksrc.500.build.f_cpu=500000000L
cube.menu.clksrc.600.build.f_cpu=600000000L
## Burn baud rate
cube.menu.burn_baudrate.1500000=1.5 Mbps
cube.menu.burn_baudrate.1000000=1 Mbps
cube.menu.burn_baudrate.1500000.build.burn_baudrate=1500000
cube.menu.burn_baudrate.1000000.build.burn_baudrate=1000000
## Burn tool firmware
cube.menu.burn_tool_firmware.cube=open-ec
cube.menu.burn_tool_firmware.cube.build.burn_tool_firmware=goE
## Point to the file for ./variants/<variant>/pins_arduino.h
cube.build.variant=sipeed_maix_cube
## "The 'core' file directory for this board, in ./cores
cube.build.core=arduino
## This sets a define for use in the compiled code.
cube.build.board=MAIX_CUBE
cube.build.sdata.size=512
## This selects the tool from "programmers.txt"
cube.upload.tool=kflash
## Limit is the 16MB Flash. Assume half is used for something else.
cube.upload.maximum_size=8388608
cube.build.ldscript="{runtime.platform.path}/cores/arduino/kendryte-standalone-sdk/lds/kendryte.ld"
####################################################
############### Sipeed Maix Go Board ###############
go.name=Sipeed Maix Go
## Toolchain
go.menu.toolsloc.default=Default
go.menu.toolsloc.default.compiler.path={runtime.tools.riscv64-unknown-elf-gcc.path}/bin/
## CPU Clock
go.menu.clksrc.400=400MHz CPU Clock Frequency
go.menu.clksrc.500=500MHz CPU Clock Frequency
go.menu.clksrc.600=600MHz CPU Clock Frequency
go.menu.clksrc.400.build.f_cpu=400000000L
go.menu.clksrc.500.build.f_cpu=500000000L
go.menu.clksrc.600.build.f_cpu=600000000L
## Burn baud rate
go.menu.burn_baudrate.2000000=2 Mbps
go.menu.burn_baudrate.4500000=4.5 Mbps (Must open-ec!)
go.menu.burn_baudrate.1500000=1.5 Mbps
go.menu.burn_baudrate.1000000=1 Mbps
go.menu.burn_baudrate.2000000.build.burn_baudrate=2000000
go.menu.burn_baudrate.4500000.build.burn_baudrate=4500000
go.menu.burn_baudrate.1500000.build.burn_baudrate=1500000
go.menu.burn_baudrate.1000000.build.burn_baudrate=1000000
## Burn tool firmware
go.menu.burn_tool_firmware.goE=open-ec
go.menu.burn_tool_firmware.goD=CMSIS-DAP
go.menu.burn_tool_firmware.goE.build.burn_tool_firmware=goE
go.menu.burn_tool_firmware.goD.build.burn_tool_firmware=goD
## Core settings
## Point to the file for ./variants/<variant>/pins_arduino.h
go.build.variant=sipeed_maix_go
## "The 'core' file directory for this board, in ./cores
go.build.core=arduino
## This sets a define for use in the compiled code.
go.build.board=MAIX_GO
## This selects the tool from "programmers.txt"
go.program.tool=kflash
go.upload.tool=kflash
## Limit is the 16MB Flash. Assume half is used for something else.
go.upload.maximum_size=8388608
go.build.ldscript="{runtime.platform.path}/cores/arduino/kendryte-standalone-sdk/lds/kendryte.ld"
##################################################
############# Sipeed Maixduino Board ###############
mduino.name=Sipeed Maixduino
## Toolchain
mduino.menu.toolsloc.default=Default
mduino.menu.toolsloc.default.compiler.path={runtime.tools.riscv64-unknown-elf-gcc.path}/bin/
## CPU Clock
mduino.menu.clksrc.400=400MHz CPU Clock Frequency
mduino.menu.clksrc.500=500MHz CPU Clock Frequency
mduino.menu.clksrc.600=600MHz CPU Clock Frequency
mduino.menu.clksrc.400.build.f_cpu=400000000L
mduino.menu.clksrc.500.build.f_cpu=500000000L
mduino.menu.clksrc.600.build.f_cpu=600000000L
## Burn baud rate
mduino.menu.burn_baudrate.1500000=1.5 Mbps
mduino.menu.burn_baudrate.1000000=1 Mbps
mduino.menu.burn_baudrate.1500000.build.burn_baudrate=1500000
mduino.menu.burn_baudrate.1000000.build.burn_baudrate=1000000
## Burn tool firmware
mduino.menu.burn_tool_firmware.mduino=Default
mduino.menu.burn_tool_firmware.mduino.build.burn_tool_firmware=maixduino
## Point to the file for ./variants/<variant>/pins_arduino.h
mduino.build.variant=sipeed_maixduino
## "The 'core' file directory for this board, in ./cores
mduino.build.core=arduino
## This sets a define for use in the compiled code.
mduino.build.board=MAIX_DUINO
mduino.build.sdata.size=512
## This selects the tool from "programmers.txt"
mduino.program.tool=kflash
mduino.upload.tool=kflash
## Limit is the 16MB Flash. Assume half is used for something else.
mduino.upload.maximum_size=8388608
mduino.build.ldscript="{runtime.platform.path}/cores/arduino/kendryte-standalone-sdk/lds/kendryte.ld"
##################################################
############# Sipeed M1W Dock Board ###############
m1w.name=Sipeed Maix Dock M1W
## Toolchain
m1w.menu.toolsloc.default=Default
m1w.menu.toolsloc.default.compiler.path={runtime.tools.riscv64-unknown-elf-gcc.path}/bin/
## CPU Clock
m1w.menu.clksrc.400=400MHz CPU Clock Frequency
m1w.menu.clksrc.500=500MHz CPU Clock Frequency
m1w.menu.clksrc.600=600MHz CPU Clock Frequency
m1w.menu.clksrc.400.build.f_cpu=400000000L
m1w.menu.clksrc.500.build.f_cpu=500000000L
m1w.menu.clksrc.600.build.f_cpu=600000000L
## Burn baud rate
m1w.menu.burn_baudrate.2000000=2 Mbps
m1w.menu.burn_baudrate.1500000=1.5 Mbps
m1w.menu.burn_baudrate.1000000=1 Mbps
m1w.menu.burn_baudrate.2000000.build.burn_baudrate=2000000
m1w.menu.burn_baudrate.1500000.build.burn_baudrate=1500000
m1w.menu.burn_baudrate.1000000.build.burn_baudrate=1000000
## Burn tool firmware
m1w.menu.burn_tool_firmware.dan=Default
m1w.menu.burn_tool_firmware.dan.build.burn_tool_firmware=dan
## Point to the file for ./variants/<variant>/pins_arduino.h
m1w.build.variant=sipeed_maix_one_w_dock
## "The 'core' file directory for this board, in ./cores
m1w.build.core=arduino
## This sets a define for use in the compiled code.
m1w.build.board=MAIX_DOCK_M1W
m1w.build.sdata.size=512
## This selects the tool from "programmers.txt"
m1w.program.tool=kflash
m1w.upload.tool=kflash
## Limit is the 16MB Flash. Assume half is used for something else.
m1w.upload.maximum_size=8388608
m1w.build.ldscript="{runtime.platform.path}/cores/arduino/kendryte-standalone-sdk/lds/kendryte.ld"
##################################################
############# Sipeed M1 Dock Board ###############
m1.name=Sipeed Maix One Dock Board
m1.name=Sipeed Maix Dock M1
## Toolchain
m1.menu.toolsloc.default=Default
@@ -39,7 +272,7 @@ m1.build.variant=sipeed_maix_one_dock
m1.build.core=arduino
## This sets a define for use in the compiled code.
m1.build.board=BOARD_SIPEED_MAIX_ONE_DOCK
m1.build.board=MAIX_DOCK_M1
m1.build.sdata.size=512
## This selects the tool from "programmers.txt"
@@ -53,7 +286,7 @@ m1.build.ldscript="{runtime.platform.path}/cores/arduino/kendryte-standalone-sdk
##################################################
############# Sipeed Maix Bit Board ###############
bit.name=Sipeed Maix Bit Board
bit.name=Sipeed Maix Bit
## Toolchain
bit.menu.toolsloc.default=Default
@@ -86,7 +319,7 @@ bit.build.variant=sipeed_maix_bit
bit.build.core=arduino
## This sets a define for use in the compiled code.
bit.build.board=BOARD_SIPEED_MAIX_BIT
bit.build.board=MAIX_BIT
bit.build.sdata.size=512
## This selects the tool from "programmers.txt"
@@ -101,7 +334,7 @@ bit.build.ldscript="{runtime.platform.path}/cores/arduino/kendryte-standalone-sd
##################################################
############# Sipeed Maix Bit with Mic Board ###############
bitm.name=Sipeed Maix Bit-Mic Board
bitm.name=Sipeed Maix Bit-Mic
## Toolchain
bitm.menu.toolsloc.default=Default
@@ -132,7 +365,7 @@ bitm.build.variant=sipeed_maix_bit_mic
bitm.build.core=arduino
## This sets a define for use in the compiled code.
bitm.build.board=BOARD_SIPEED_MAIX_BIT
bitm.build.board=MAIX_BIT_M
bitm.build.sdata.size=512
## This selects the tool from "programmers.txt"
@@ -142,106 +375,101 @@ bitm.upload.tool=kflash
bitm.upload.maximum_size=8388608
bitm.build.ldscript="{runtime.platform.path}/cores/arduino/kendryte-standalone-sdk/lds/kendryte.ld"
####################################################
############### Sipeed Maix Go Board ###############
go.name=Sipeed Maix Go Board
## Toolchain
go.menu.toolsloc.default=Default
go.menu.toolsloc.default.compiler.path={runtime.tools.riscv64-unknown-elf-gcc.path}/bin/
## CPU Clock
go.menu.clksrc.400=400MHz CPU Clock Frequency
go.menu.clksrc.500=500MHz CPU Clock Frequency
go.menu.clksrc.600=600MHz CPU Clock Frequency
go.menu.clksrc.400.build.f_cpu=400000000L
go.menu.clksrc.500.build.f_cpu=500000000L
go.menu.clksrc.600.build.f_cpu=600000000L
## Burn baud rate
go.menu.burn_baudrate.2000000=2 Mbps
go.menu.burn_baudrate.4500000=4.5 Mbps (Must open-ec!)
go.menu.burn_baudrate.1500000=1.5 Mbps
go.menu.burn_baudrate.1000000=1 Mbps
go.menu.burn_baudrate.2000000.build.burn_baudrate=2000000
go.menu.burn_baudrate.4500000.build.burn_baudrate=4500000
go.menu.burn_baudrate.1500000.build.burn_baudrate=1500000
go.menu.burn_baudrate.1000000.build.burn_baudrate=1000000
## Burn tool firmware
go.menu.burn_tool_firmware.goE=open-ec
go.menu.burn_tool_firmware.goD=CMSIS-DAP
go.menu.burn_tool_firmware.goE.build.burn_tool_firmware=goE
go.menu.burn_tool_firmware.goD.build.burn_tool_firmware=goD
## Core settings
go.build.variant=sipeed_maix_go
go.build.core=arduino
## This sets a define for use in the compiled code.
go.build.board=BOARD_SIPEED_MAIX_GO
## This selects the tool from "programmers.txt"
go.program.tool=kflash
go.upload.tool=kflash
## Limit is the 16MB Flash. Assume half is used for something else.
go.upload.maximum_size=8388608
go.build.ldscript="{runtime.platform.path}/cores/arduino/kendryte-standalone-sdk/lds/kendryte.ld"
##################################################
############# Sipeed Maixduino Board ###############
############# M5Stack M5StickV Stick ###############
mduino.name=Sipeed Maixduino Board
stickv.name=M5Stack M5StickV Stick
## Toolchain
mduino.menu.toolsloc.default=Default
mduino.menu.toolsloc.default.compiler.path={runtime.tools.riscv64-unknown-elf-gcc.path}/bin/
stickv.menu.toolsloc.default=Default
stickv.menu.toolsloc.default.compiler.path={runtime.tools.riscv64-unknown-elf-gcc.path}/bin/
## CPU Clock
mduino.menu.clksrc.400=400MHz CPU Clock Frequency
mduino.menu.clksrc.500=500MHz CPU Clock Frequency
mduino.menu.clksrc.600=600MHz CPU Clock Frequency
mduino.menu.clksrc.400.build.f_cpu=400000000L
mduino.menu.clksrc.500.build.f_cpu=500000000L
mduino.menu.clksrc.600.build.f_cpu=600000000L
stickv.menu.clksrc.400=400MHz CPU Clock Frequency
stickv.menu.clksrc.500=500MHz CPU Clock Frequency
stickv.menu.clksrc.600=600MHz CPU Clock Frequency
stickv.menu.clksrc.400.build.f_cpu=400000000L
stickv.menu.clksrc.500.build.f_cpu=500000000L
stickv.menu.clksrc.600.build.f_cpu=600000000L
## Burn baud rate
mduino.menu.burn_baudrate.1500000=1.5 Mbps
mduino.menu.burn_baudrate.1000000=1 Mbps
mduino.menu.burn_baudrate.1500000.build.burn_baudrate=1500000
mduino.menu.burn_baudrate.1000000.build.burn_baudrate=1000000
stickv.menu.burn_baudrate.1500000=1.5 Mbps
stickv.menu.burn_baudrate.1000000=1 Mbps
stickv.menu.burn_baudrate.1500000.build.burn_baudrate=1500000
stickv.menu.burn_baudrate.1000000.build.burn_baudrate=1000000
## Burn tool firmware
mduino.menu.burn_tool_firmware.mduino=Default
mduino.menu.burn_tool_firmware.mduino.build.burn_tool_firmware=maixduino
stickv.menu.burn_tool_firmware.stick1=CH340
stickv.menu.burn_tool_firmware.stick1.build.burn_tool_firmware=bit-mic
## Point to the file for ./variants/<variant>/pins_arduino.h
mduino.build.variant=sipeed_maixduino
stickv.build.variant=m5stack_m5stick_v
## "The 'core' file directory for this board, in ./cores
mduino.build.core=arduino
stickv.build.core=arduino
## This sets a define for use in the compiled code.
mduino.build.board=BOARD_SIPEED_MAIX_DUINO
mduino.build.sdata.size=512
stickv.build.board=M5STICK_V
stickv.build.sdata.size=512
## This selects the tool from "programmers.txt"
mduino.program.tool=kflash
mduino.upload.tool=kflash
stickv.program.tool=kflash
stickv.upload.tool=kflash
## Limit is the 16MB Flash. Assume half is used for something else.
mduino.upload.maximum_size=8388608
mduino.build.ldscript="{runtime.platform.path}/cores/arduino/kendryte-standalone-sdk/lds/kendryte.ld"
stickv.upload.maximum_size=8388608
stickv.build.ldscript="{runtime.platform.path}/cores/arduino/kendryte-standalone-sdk/lds/kendryte.ld"
##################################################
############# M5Stack M5UnitV Camera ###############
unitv.name=M5Stack M5UnitV Camera
## Toolchain
unitv.menu.toolsloc.default=Default
unitv.menu.toolsloc.default.compiler.path={runtime.tools.riscv64-unknown-elf-gcc.path}/bin/
## CPU Clock
unitv.menu.clksrc.400=400MHz CPU Clock Frequency
unitv.menu.clksrc.500=500MHz CPU Clock Frequency
unitv.menu.clksrc.600=600MHz CPU Clock Frequency
unitv.menu.clksrc.400.build.f_cpu=400000000L
unitv.menu.clksrc.500.build.f_cpu=500000000L
unitv.menu.clksrc.600.build.f_cpu=600000000L
## Burn baud rate
unitv.menu.burn_baudrate.1500000=1.5 Mbps
unitv.menu.burn_baudrate.1000000=1 Mbps
unitv.menu.burn_baudrate.1500000.build.burn_baudrate=1500000
unitv.menu.burn_baudrate.1000000.build.burn_baudrate=1000000
## Burn tool firmware
unitv.menu.burn_tool_firmware.unit1=CH340
unitv.menu.burn_tool_firmware.unit1.build.burn_tool_firmware=bit-mic
## Point to the file for ./variants/<variant>/pins_arduino.h
unitv.build.variant=m5stack_m5unit_v
## "The 'core' file directory for this board, in ./cores
unitv.build.core=arduino
## This sets a define for use in the compiled code.
unitv.build.board=M5UNIT_V
unitv.build.sdata.size=512
## This selects the tool from "programmers.txt"
unitv.program.tool=kflash
unitv.upload.tool=kflash
## Limit is the 16MB Flash. Assume half is used for something else.
unitv.upload.maximum_size=8388608
unitv.build.ldscript="{runtime.platform.path}/cores/arduino/kendryte-standalone-sdk/lds/kendryte.ld"
##################################################
############# LamLoei AIoT DaaN Board ###############
aiotdaan.name=LamLoei AIoT DaaN Board
aiotdaan.name=LamLoei AIoT DaaN
## Toolchain
aiotdaan.menu.toolsloc.default=Default
@@ -274,7 +502,7 @@ aiotdaan.build.variant=lamloei_aiot_daan
aiotdaan.build.core=arduino
## This sets a define for use in the compiled code.
aiotdaan.build.board=BOARD_SIPEED_MAIX_ONE_DOCK
aiotdaan.build.board=MAIX_DOCK_M1
aiotdaan.build.sdata.size=512
## This selects the tool from "programmers.txt"
@@ -321,7 +549,7 @@ ioxgd4.build.variant=ioxgd4
ioxgd4.build.core=arduino
## This sets a define for use in the compiled code.
ioxgd4.build.board=BOARD_SIPEED_MAIX_ONE_DOCK
ioxgd4.build.board=MAIX_DOCK_M1
ioxgd4.build.sdata.size=512
## This selects the tool from "programmers.txt"

115
libraries/AXP173/AXP173.cpp Normal file
View File

@@ -0,0 +1,115 @@
#include "AXP173.h"
AXP173::AXP173()
{
}
void AXP173::begin(bool isInited)
{
if(!isInited){
Wire.begin((uint8_t) SDA, (uint8_t) SCL, 400000);
}
#if defined (ARDUINO_MAIX_AMIGO)
Write1Byte(0x27, 0x20); //LDO4 - 0.8V (default 0x48 1.8V)
Write1Byte(0x28, 0x0C); //LDO2/3 - LDO2 1.8V / LDO3 3.0V
#else //ARDUINO_MAIX_CUBE
Write1Byte(0x46, 0xFF); //Clear interupts
Write1Byte(0x33, 0xC1); //Set Bat Charging Voltage to 4V2, Current to 190mA
Write1Byte(0x10, (Read8bit(0x10) & 0xFC)); //EXTEN & DC-DC2 control
#endif
}
void AXP173::Write1Byte( uint8_t Addr , uint8_t Data )
{
Wire.beginTransmission(AXP_ADDR);
Wire.write(Addr);
Wire.write(Data);
Wire.endTransmission();
}
uint8_t AXP173::Read8bit( uint8_t Addr )
{
Wire.beginTransmission(AXP_ADDR);
Wire.write(Addr);
Wire.endTransmission();
Wire.requestFrom(AXP_ADDR, 1);
return Wire.read();
}
uint16_t AXP173::Read12Bit( uint8_t Addr)
{
uint16_t Data = 0;
uint8_t buf[2];
ReadBuff(Addr,2,buf);
Data = ((buf[0] << 4) + buf[1]);
return Data;
}
uint16_t AXP173::Read13Bit( uint8_t Addr)
{
uint16_t Data = 0;
uint8_t buf[2];
ReadBuff(Addr,2,buf);
Data = ((buf[0] << 5) + buf[1]);
return Data;
}
uint16_t AXP173::Read16bit( uint8_t Addr )
{
uint16_t ReData = 0;
Wire.beginTransmission(AXP_ADDR);
Wire.write(Addr);
Wire.endTransmission();
Wire.requestFrom(AXP_ADDR, 2);
for( int i = 0 ; i < 2 ; i++ )
{
ReData <<= 8;
ReData |= Wire.read();
}
return ReData;
}
uint32_t AXP173::Read24bit( uint8_t Addr )
{
uint32_t ReData = 0;
Wire.beginTransmission(AXP_ADDR);
Wire.write(Addr);
Wire.endTransmission();
Wire.requestFrom(AXP_ADDR, 3);
for( int i = 0 ; i < 3 ; i++ )
{
ReData <<= 8;
ReData |= Wire.read();
}
return ReData;
}
uint32_t AXP173::Read32bit( uint8_t Addr )
{
uint32_t ReData = 0;
Wire.beginTransmission(AXP_ADDR);
Wire.write(Addr);
Wire.endTransmission();
Wire.requestFrom(AXP_ADDR, 4);
for( int i = 0 ; i < 4 ; i++ )
{
ReData <<= 8;
ReData |= Wire.read();
}
return ReData;
}
void AXP173::ReadBuff( uint8_t Addr , uint8_t Size , uint8_t *Buff )
{
Wire.beginTransmission(AXP_ADDR);
Wire.write(Addr);
Wire.endTransmission();
Wire.requestFrom(AXP_ADDR, (int)Size);
for (int i = 0; i < Size; i++)
{
*( Buff + i ) = Wire.read();
}
}

53
libraries/AXP173/AXP173.h Normal file
View File

@@ -0,0 +1,53 @@
#ifndef __AXP173_H__
#define __AXP173_H__
#include <Wire.h>
#include <Arduino.h>
#define SLEEP_MSEC(us) (((uint64_t)us) * 1000L)
#define SLEEP_SEC(us) (((uint64_t)us) * 1000000L)
#define SLEEP_MIN(us) (((uint64_t)us) * 60L * 1000000L)
#define SLEEP_HR(us) (((uint64_t)us) * 60L * 60L * 1000000L)
#define AXP_ADDR 0X34
#define CURRENT_100MA (0b0000)
#define CURRENT_190MA (0b0001)
#define CURRENT_280MA (0b0010)
#define CURRENT_360MA (0b0011)
#define CURRENT_450MA (0b0100)
#define CURRENT_550MA (0b0101)
#define CURRENT_630MA (0b0110)
#define CURRENT_700MA (0b0111)
class AXP173 {
public:
AXP173();
/**
* DCDC1: 3V3 Main rail. When not set the stick shuts down
* DCDC2: 0V9 K210 VCore
* DCDC3: 1V8 Use unknown
* LDO1: Don't set GPIO1 as LDO
* LDO2: 2V8 Display backlight
* LDO3: 1V5 Display Control
* GPIO0: LDO1 LCD_BL
* EXTEN:
*/
void begin(bool isInited = false);
public:
private:
void Write1Byte( uint8_t Addr , uint8_t Data );
uint8_t Read8bit( uint8_t Addr );
uint16_t Read12Bit( uint8_t Addr);
uint16_t Read13Bit( uint8_t Addr);
uint16_t Read16bit( uint8_t Addr );
uint32_t Read24bit( uint8_t Addr );
uint32_t Read32bit( uint8_t Addr );
void ReadBuff( uint8_t Addr , uint8_t Size , uint8_t *Buff );
};
#endif

428
libraries/AXP192/AXP192.cpp Normal file
View File

@@ -0,0 +1,428 @@
#include "AXP192.h"
AXP192::AXP192()
{
}
void AXP192::begin(bool isInited)
{
if(!isInited){
Wire.begin((uint8_t) SDA, (uint8_t) SCL, 400000);
}
Write1Byte(0x46, 0xFF); //Clear interupts
Write1Byte(0x23, 0x08); //Set DC-DC2 (VCore) to 0V9
Write1Byte(0x33, 0xC0); //Set Bat Charging Voltage to 4V2, Current to 100mA
Write1Byte(0x36, 0x0C); //Set 128ms power on, 4s power off
Write1Byte(0x91, 0xF0); //Set GPIO0 (TFT_BL) (from 0x70 (min)) to 3V3 (max)
Write1Byte(0x90, 0x02); //Set GPIO0 to LDO mode
Write1Byte(0x28, 0xF0); //VDD2.8V net: LDO2 3.3V, VDD 1.5V net: LDO3 1.8V
Write1Byte(0x27, 0x2C); //VDD1.8V net: DC-DC3 1.8V
Write1Byte(0x12, 0xFF); //Enble all LDO/DC_DC and EXTEN
Write1Byte(0x23, 0x08); //VDD 0.9v net: DC-DC2 0.9V
Write1Byte(0x32, 0x46); //Enable bat detection
Write1Byte(0x39, 0xFC); //Disable Temp Protection (Sensor doesn't exist!)
Write1Byte(0x31, (Read8bit(0x31) & 0xf8) | (1 << 2)); // Set Power off voltage 3V0
fpioa_set_function(INTL_INT, (fpioa_function_t)(FUNC_GPIOHS0 + 26));
gpiohs_set_drive_mode(26, GPIO_DM_OUTPUT);
gpiohs_set_pin(26, GPIO_PV_HIGH); //Disable VBUS As Input, BAT->5V Boost->VBUS->Charing Cycle
msleep(20);
}
void AXP192::Write1Byte( uint8_t Addr , uint8_t Data )
{
Wire.beginTransmission(AXP_ADDR);
Wire.write(Addr);
Wire.write(Data);
Wire.endTransmission();
}
uint8_t AXP192::Read8bit( uint8_t Addr )
{
Wire.beginTransmission(AXP_ADDR);
Wire.write(Addr);
Wire.endTransmission();
Wire.requestFrom(AXP_ADDR, 1);
return Wire.read();
}
uint16_t AXP192::Read12Bit( uint8_t Addr)
{
uint16_t Data = 0;
uint8_t buf[2];
ReadBuff(Addr,2,buf);
Data = ((buf[0] << 4) + buf[1]);
return Data;
}
uint16_t AXP192::Read13Bit( uint8_t Addr)
{
uint16_t Data = 0;
uint8_t buf[2];
ReadBuff(Addr,2,buf);
Data = ((buf[0] << 5) + buf[1]);
return Data;
}
uint16_t AXP192::Read16bit( uint8_t Addr )
{
uint16_t ReData = 0;
Wire.beginTransmission(AXP_ADDR);
Wire.write(Addr);
Wire.endTransmission();
Wire.requestFrom(AXP_ADDR, 2);
for( int i = 0 ; i < 2 ; i++ )
{
ReData <<= 8;
ReData |= Wire.read();
}
return ReData;
}
uint32_t AXP192::Read24bit( uint8_t Addr )
{
uint32_t ReData = 0;
Wire.beginTransmission(AXP_ADDR);
Wire.write(Addr);
Wire.endTransmission();
Wire.requestFrom(AXP_ADDR, 3);
for( int i = 0 ; i < 3 ; i++ )
{
ReData <<= 8;
ReData |= Wire.read();
}
return ReData;
}
uint32_t AXP192::Read32bit( uint8_t Addr )
{
uint32_t ReData = 0;
Wire.beginTransmission(AXP_ADDR);
Wire.write(Addr);
Wire.endTransmission();
Wire.requestFrom(AXP_ADDR, 4);
for( int i = 0 ; i < 4 ; i++ )
{
ReData <<= 8;
ReData |= Wire.read();
}
return ReData;
}
void AXP192::ReadBuff( uint8_t Addr , uint8_t Size , uint8_t *Buff )
{
Wire.beginTransmission(AXP_ADDR);
Wire.write(Addr);
Wire.endTransmission();
Wire.requestFrom(AXP_ADDR, (int)Size);
for (int i = 0; i < Size; i++)
{
*( Buff + i ) = Wire.read();
}
}
void AXP192::ScreenBreath(uint8_t brightness)
{
if (brightness > 12)
{
brightness = 12;
}
uint8_t buf = Read8bit( 0x28 );
Write1Byte( 0x28 , ((buf & 0x0f) | (brightness << 4)) );
}
// Return True = Battery Exist
bool AXP192::GetBatState()
{
if( Read8bit(0x01) | 0x20 )
return true;
else
return false;
}
// Input Power Status
uint8_t AXP192::GetInputPowerStatus()
{
return Read8bit(0x00);
}
// Battery Charging Status
uint8_t AXP192::GetBatteryChargingStatus()
{
return Read8bit(0x01);
}
//---------coulombcounter_from_here---------
//enable: void EnableCoulombcounter(void);
//disable: void DisableCOulombcounter(void);
//stop: void StopCoulombcounter(void);
//clear: void ClearCoulombcounter(void);
//get charge data: uint32_t GetCoulombchargeData(void);
//get discharge data: uint32_t GetCoulombdischargeData(void);
//get coulomb val affter calculation: float GetCoulombData(void);
//------------------------------------------
void AXP192::EnableCoulombcounter(void)
{
Write1Byte( 0xB8 , 0x80 );
}
void AXP192::DisableCoulombcounter(void)
{
Write1Byte( 0xB8 , 0x00 );
}
void AXP192::StopCoulombcounter(void)
{
Write1Byte( 0xB8 , 0xC0 );
}
void AXP192::ClearCoulombcounter(void)
{
Write1Byte( 0xB8, Read8bit(0xB8) | 0x20); // Only set the Clear Flag
}
uint32_t AXP192::GetCoulombchargeData(void)
{
return Read32bit(0xB0);
}
uint32_t AXP192::GetCoulombdischargeData(void)
{
return Read32bit(0xB4);
}
float AXP192::GetCoulombData(void)
{
uint32_t coin = GetCoulombchargeData();
uint32_t coout = GetCoulombdischargeData();
uint32_t valueDifferent = 0;
bool bIsNegative = false;
if (coin > coout)
{ // Expected, in always more then out
valueDifferent = coin - coout;
}
else
{ // Warning: Out is more than In, the battery is not started at 0%
// just Flip the output sign later
bIsNegative = true;
valueDifferent = coout - coin;
}
//c = 65536 * current_LSB * (coin - coout) / 3600 / ADC rate
//Adc rate can be read from 84H, change this variable if you change the ADC reate
float ccc = (65536 * 0.5 * valueDifferent) / 3600.0 / 200.0; // Note the ADC has defaulted to be 200 Hz
if( bIsNegative )
ccc = 0.0 - ccc; // Flip it back to negative
return ccc;
}
//----------coulomb_end_at_here----------
uint8_t AXP192::GetWarningLeve(void)
{
Wire.beginTransmission(AXP_ADDR);
Wire.write(0x47);
Wire.endTransmission();
Wire.requestFrom(AXP_ADDR, 1);
uint8_t buf = Wire.read();
return (buf & 0x01);
}
void AXP192::SetSleep(void)
{
Write1Byte(0x31 , Read8bit(0x31) | ( 1 << 3)); // Turn on short press to wake up
Write1Byte(0x90 , Read8bit(0x90) | 0x07); // GPIO1 floating
Write1Byte(0x82, 0x00); // Disable ADCs
Write1Byte(0x12, Read8bit(0x12) & 0xA1); // Disable all outputs but DCDC1
}
// Return 0 = not press, 0x01 = long press(1.5s), 0x02 = short press
uint8_t AXP192::GetBtnPress()
{
uint8_t state = Read8bit(0x46); // IRQ 3 status.
if(state)
{
Write1Byte( 0x46 , 0x03 ); // Write 1 back to clear IRQ
}
return state;
}
// Low Volt Level 1, when APS Volt Output < 3.4496 V
// Low Volt Level 2, when APS Volt Output < 3.3992 V, then this flag is SET (0x01)
// Flag will reset once battery volt is charged above Low Volt Level 1
// Note: now AXP192 have the Shutdown Voltage of 3.0V (B100) Def in REG 31H
uint8_t AXP192::GetWarningLevel(void)
{
return Read8bit(0x47) & 0x01;
}
float AXP192::GetBatVoltage()
{
float ADCLSB = 1.1 / 1000.0;
uint16_t ReData = Read12Bit( 0x78 );
return ReData * ADCLSB;
}
float AXP192::GetBatCurrent()
{
float ADCLSB = 0.5;
uint16_t CurrentIn = Read13Bit( 0x7A );
uint16_t CurrentOut = Read13Bit( 0x7C );
return ( CurrentIn - CurrentOut ) * ADCLSB;
}
float AXP192::GetVinVoltage()
{
float ADCLSB = 1.7 / 1000.0;
uint16_t ReData = Read12Bit( 0x56 );
return ReData * ADCLSB;
}
float AXP192::GetVinCurrent()
{
float ADCLSB = 0.625;
uint16_t ReData = Read12Bit( 0x58 );
return ReData * ADCLSB;
}
float AXP192::GetVBusVoltage()
{
float ADCLSB = 1.7 / 1000.0;
uint16_t ReData = Read12Bit( 0x5A );
return ReData * ADCLSB;
}
float AXP192::GetVBusCurrent()
{
float ADCLSB = 0.375;
uint16_t ReData = Read12Bit( 0x5C );
return ReData * ADCLSB;
}
float AXP192::GetTempInAXP192()
{
float ADCLSB = 0.1;
const float OFFSET_DEG_C = -144.7;
uint16_t ReData = Read12Bit( 0x5E );
return OFFSET_DEG_C + ReData * ADCLSB;
}
float AXP192::GetBatPower()
{
float VoltageLSB = 1.1;
float CurrentLCS = 0.5;
uint32_t ReData = Read24bit( 0x70 );
return VoltageLSB * CurrentLCS * ReData/ 1000.0;
}
float AXP192::GetBatChargeCurrent()
{
float ADCLSB = 0.5;
uint16_t ReData = Read13Bit( 0x7A );
return ReData * ADCLSB;
}
float AXP192::GetAPSVoltage()
{
float ADCLSB = 1.4 / 1000.0;
uint16_t ReData = Read12Bit( 0x7E );
return ReData * ADCLSB;
}
float AXP192::GetBatCoulombInput()
{
uint32_t ReData = Read32bit( 0xB0 );
return ReData * 65536 * 0.5 / 3600 /25.0;
}
float AXP192::GetBatCoulombOut()
{
uint32_t ReData = Read32bit( 0xB4 );
return ReData * 65536 * 0.5 / 3600 /25.0;
}
// Can turn LCD Backlight OFF for power saving
void AXP192::SetLDO2( bool State )
{
uint8_t buf = Read8bit(0x12);
if( State == true )
{
buf = (1<<2) | buf;
}
else
{
buf = ~(1<<2) & buf;
}
Write1Byte( 0x12 , buf );
}
void AXP192::SetLDO3(bool State)
{
uint8_t buf = Read8bit(0x12);
if( State == true )
{
buf = (1<<3) | buf;
}
else
{
buf = ~(1<<3) & buf;
}
Write1Byte( 0x12 , buf );
}
// Not recommend to set charge current > 100mA, since Battery is only 80mAh.
// more then 1C charge-rate may shorten battery life-span.
void AXP192::SetChargeCurrent(uint8_t current)
{
uint8_t buf = Read8bit(0x33);
buf = (buf & 0xf0) | (current & 0x07);
Write1Byte(0x33, buf);
}
// Cut all power, except for LDO1 (RTC)
void AXP192::PowerOff()
{
Write1Byte(0x32, Read8bit(0x32) | 0x80); // MSB for Power Off
}
void AXP192::SetAdcState(bool state)
{
Write1Byte(0x82, state ? 0xff : 0x00); // Enable / Disable all ADCs
}
// AXP192 have a 6 byte storage, when the power is still valid, the data will not be lost
void AXP192::Read6BytesStorage( uint8_t *bufPtr )
{
// Address from 0x06 - 0x0B
Wire.beginTransmission(AXP_ADDR);
Wire.write(0x06);
Wire.endTransmission();
Wire.requestFrom(AXP_ADDR, 6);
for( int i = 0; i < 6; ++i )
{
bufPtr[i] = Wire.read();
}
}
// AXP192 have a 6 byte storage, when the power is still valid, the data will not be lost
void AXP192::Write6BytesStorage( uint8_t *bufPtr )
{
// Address from 0x06 - 0x0B
Wire.beginTransmission(AXP_ADDR);
Wire.write(0x06);
Wire.write(bufPtr[0]);
Wire.write(0x07);
Wire.write(bufPtr[1]);
Wire.write(0x08);
Wire.write(bufPtr[2]);
Wire.write(0x09);
Wire.write(bufPtr[3]);
Wire.write(0x0A);
Wire.write(bufPtr[4]);
Wire.write(0x0B);
Wire.write(bufPtr[5]);
Wire.endTransmission();
}

94
libraries/AXP192/AXP192.h Normal file
View File

@@ -0,0 +1,94 @@
#ifndef __AXP192_H__
#define __AXP192_H__
#include <Wire.h>
#include <Arduino.h>
#define SLEEP_MSEC(us) (((uint64_t)us) * 1000L)
#define SLEEP_SEC(us) (((uint64_t)us) * 1000000L)
#define SLEEP_MIN(us) (((uint64_t)us) * 60L * 1000000L)
#define SLEEP_HR(us) (((uint64_t)us) * 60L * 60L * 1000000L)
#define AXP_ADDR 0X34
#define CURRENT_100MA (0b0000)
#define CURRENT_190MA (0b0001)
#define CURRENT_280MA (0b0010)
#define CURRENT_360MA (0b0011)
#define CURRENT_450MA (0b0100)
#define CURRENT_550MA (0b0101)
#define CURRENT_630MA (0b0110)
#define CURRENT_700MA (0b0111)
class AXP192 {
public:
AXP192();
/**
* DCDC1: 3V3 Main rail. When not set the stick shuts down
* DCDC2: 0V9 K210 VCore
* DCDC3: 1V8 Use unknown
* LDO1: Don't set GPIO1 as LDO
* LDO2: 2V8 Display backlight
* LDO3: 1V5 Display Control
* GPIO0: LDO1 LCD_BL
* EXTEN:
*/
void begin(bool isInited = false);
void ScreenBreath(uint8_t brightness);
bool GetBatState();
uint8_t GetInputPowerStatus();
uint8_t GetBatteryChargingStatus();
void EnableCoulombcounter(void);
void DisableCoulombcounter(void);
void StopCoulombcounter(void);
void ClearCoulombcounter(void);
uint32_t GetCoulombchargeData(void); // Raw Data for Charge
uint32_t GetCoulombdischargeData(void); // Raw Data for Discharge
float GetCoulombData(void); // total in - total out and calc
uint8_t GetBtnPress(void);
void SetSleep(void);
uint8_t GetWarningLeve(void);
public:
// void SetChargeVoltage( uint8_t );
void SetChargeCurrent( uint8_t );
float GetBatVoltage();
float GetBatCurrent();
float GetVinVoltage();
float GetVinCurrent();
float GetVBusVoltage();
float GetVBusCurrent();
float GetTempInAXP192();
float GetBatPower();
float GetBatChargeCurrent();
float GetAPSVoltage();
float GetBatCoulombInput();
float GetBatCoulombOut();
uint8_t GetWarningLevel(void);
void SetLDO2( bool State ); // Can turn LCD Backlight OFF for power saving
void SetLDO3( bool State );
void SetAdcState(bool State);
// -- Power Off
void PowerOff();
// Power Maintained Storage
void Read6BytesStorage( uint8_t *bufPtr );
void Write6BytesStorage( uint8_t *bufPtr );
private:
void Write1Byte( uint8_t Addr , uint8_t Data );
uint8_t Read8bit( uint8_t Addr );
uint16_t Read12Bit( uint8_t Addr);
uint16_t Read13Bit( uint8_t Addr);
uint16_t Read16bit( uint8_t Addr );
uint32_t Read24bit( uint8_t Addr );
uint32_t Read32bit( uint8_t Addr );
void ReadBuff( uint8_t Addr , uint8_t Size , uint8_t *Buff );
};
#endif

93
variants/m5stack_m5stick_v/pins_arduino.h Normal file
View File

@@ -0,0 +1,93 @@
#ifndef _VARIANT_M5STACK_M5STICK_V
#define _VARIANT_M5STACK_M5STICK_V
#include <stdint.h>
#define RISCV
#include "platform.h"
#include "Arduino.h"
#include "pwm.h"
#ifdef __cplusplus
#include "UARTClass.h"
extern class UARTHSClass Serial;
extern class UARTClass Serial1;
extern class UARTClass Serial2;
extern class UARTClass Serial3;
#endif
/* BOARD PIN DEFINE */
/* UART */
#define RX0 4
#define TX0 5
/* LEDs */
#define PIN_LED_RED 6
#define PIN_LED_WHITE 7
#define PIN_LED_BLUE 8
#define PIN_LED_GREEN 9
#define PIN_LED 9
#define LED_RED 6
#define LED_WHITE 7
#define LED_BLUE 8
#define LED_GREEN 9
#define LED_BUILTIN 9
/* MIC ARRAY */
#define MIC_WS 10
#define MIC_DAT3 12
#define MIC_BCK 13
/* SPK MAX98357 */
#define I2S_SD 11
#define I2S_LRCLK 14
#define I2S_BCLK 15
#define I2S_DIN 17
/* LCD ST7789 135x240 */
#define LCD_SDA 18
#define LCD_SCL 19
#define LCD_DC 20
#define LCD_RST 21
#define LCD_CS 22
/* AXP192 INT PIN */
#define INTL_INT 23
/* INTL I2C - AXP192, MPU6886 */
#define SCL 28
#define SDA 29
/* SPI0 */
#define SPI0_SCLK 30
#define SPI0_MISO 31
#define SPI0_CS0 32
#define SPI0_MOSI 33
/* GROVE */
#define RX1 34
#define TX1 35
#define EXTL_SCL 34
#define EXTL_SDA 35
/* BUTTONS */
#define BTN_A 36
#define BTN_B 37
#define KEY0 36
#define KEY1 37
#define MD_PIN_MAP(fpio) (fpio)
#define ORG_PIN_MAP(org_pin) (org_pin)
static const uint8_t SS = SPI0_CS0 ;
static const uint8_t MOSI = SPI0_MOSI;
static const uint8_t MISO = SPI0_MISO;
static const uint8_t SCK = SPI0_SCLK;
typedef struct _pwm_fpio_set_t{
pwm_channel_number_t channel;
pwm_device_number_t device;
uint8_t inuse;
} pwm_fpio_set_t;
#define VARIANT_NUM_GPIOHS (32)
#define VARIANT_NUM_GPIO ( 8)
#define VARIANT_NUM_PWM (12)
#define VARIANT_NUM_I2C ( 3)
#define VARIANT_NUM_SPI ( 3)
#define VARIANT_NUM_UART ( 3)
#endif

78
variants/m5stack_m5unit_v/pins_arduino.h Normal file
View File

@@ -0,0 +1,78 @@
#ifndef _VARIANT_M5STACK_M5UNIT_V
#define _VARIANT_M5STACK_M5UNIT_V
#include <stdint.h>
#define RISCV
#include "platform.h"
#include "Arduino.h"
#include "pwm.h"
#ifdef __cplusplus
#include "UARTClass.h"
extern class UARTHSClass Serial;
extern class UARTClass Serial1;
extern class UARTClass Serial2;
extern class UARTClass Serial3;
#endif
/* BOARD PIN DEFINE */
/* UART */
#define RX0 4
#define TX0 5
/* WS2812 LEDs */
#define PIN_LED_RGB 8
/* MIC ARRAY */
#define MIC_WS 10
#define MIC_DAT3 12
#define MIC_BCK 13
/* SPK MAX98357 */
#define SPK_LRCLK 14
#define SPK_BCLK 15
#define SPK_DIN 17
#define SPK_SD 25
/* BUTTONS */
#define BTN_A 18
#define BTN_B 19
#define KEY0 18
#define KEY1 19
/* AXP192 INT PIN */
#define AXP_INT 23
/* INTL I2C */
#define SCL 28
#define SDA 29
/* SPI0 */
#define SPI0_SCLK 30
#define SPI0_MISO 31
#define SPI0_CS0 32
#define SPI0_MOSI 33
/* EXTL I2C */
#define EXTL_SCL 34
#define EXTL_SDA 35
#define MD_PIN_MAP(fpio) (fpio)
#define ORG_PIN_MAP(org_pin) (org_pin)
static const uint8_t SS = SPI0_CS0 ;
static const uint8_t MOSI = SPI0_MOSI;
static const uint8_t MISO = SPI0_MISO;
static const uint8_t SCK = SPI0_SCLK;
typedef struct _pwm_fpio_set_t{
pwm_channel_number_t channel;
pwm_device_number_t device;
uint8_t inuse;
}pwm_fpio_set_t;
#define VARIANT_NUM_GPIOHS (32)
#define VARIANT_NUM_GPIO ( 8)
#define VARIANT_NUM_PWM (12)
#define VARIANT_NUM_I2C ( 3)
#define VARIANT_NUM_SPI ( 3)
#define VARIANT_NUM_UART ( 3)
#endif

96
variants/sipeed_maix_amigo/pins_arduino.h Normal file
View File

@@ -0,0 +1,96 @@
#ifndef _VARIANT_SIPEED_MAIX_AMIGO
#define _VARIANT_SIPEED_MAIX_AMIGO
#include <stdint.h>
#define RISCV
#include "platform.h"
#include "Arduino.h"
#include "pwm.h"
#ifdef __cplusplus
#include "UARTClass.h"
extern class UARTHSClass Serial;
extern class UARTClass Serial1;
extern class UARTClass Serial2;
extern class UARTClass Serial3;
#endif
/* BOARD PIN DEFINE */
/* UARTHS CH552T */
#define RX0 4
#define TX0 5
/* UART Grove */
#define RX1 9 //Grove
#define TX1 7 //Grove
/* 8P Connector */
// #define PB0 8 //8P-12
// #define PB1 12 //8P-3
/* SPI0 */
#define SPI0_MISO 6 //8P-11
#define SPI0_MOSI 10 //8P-2
#define SPI0_SCLK 11 //8P-1
#define SPI0_CS0 26 //TF
/* KEYs */
#define KEY2 20 //Grove
#define KEY1 23 //Grove
/* LEDs */
#define PIN_LED_RED 14
#define PIN_LED_GREEN 15
#define PIN_LED_BLUE 17
#define PIN_LED 15
#define LED_RED 14
#define LED_GREEN 15
#define LED_BLUE 17
#define LED_BUILTIN 15
/* UART3 */
#define TX2 22 //8P-4
#define RX2 25 //8P-5
/* I2C1 - AXP173, MSA301, TOUCH */
#define SCL 24
#define SDA 27
/* USB_SBU */
#define USB_DP 28 //8P-8
#define USB_DM 29 //8P-9
/* I2S AUDIO CODEC ES8374 */
#define I2S2_MCLK 13
#define I2S2_WS 18
#define I2S2_SCLK 21
#define I2S2_DOUT 34
#define I2S2_DIN 35
/* Flash LED */
#define WLED_EN 32
/* TouchScreen */
#define CAP_TOUCH_IRQ 33
/* LCD */
#define LCD_TEN 19
#define LCD_CS 36
#define LCD_RST 37
#define LCD_DC 38
#define LCD_WR 39
#define MD_PIN_MAP(fpio) (fpio)
#define ORG_PIN_MAP(org_pin) (org_pin)
static const uint8_t SS = SPI0_CS0 ;
static const uint8_t MOSI = SPI0_MOSI;
static const uint8_t MISO = SPI0_MISO;
static const uint8_t SCK = SPI0_SCLK;
typedef struct _pwm_fpio_set_t{
pwm_channel_number_t channel;
pwm_device_number_t device;
uint8_t inuse;
} pwm_fpio_set_t;
#define VARIANT_NUM_GPIOHS (32)
#define VARIANT_NUM_GPIO ( 8)
#define VARIANT_NUM_PWM (12)
#define VARIANT_NUM_I2C ( 3)
#define VARIANT_NUM_SPI ( 3)
#define VARIANT_NUM_UART ( 3)
#endif

64
variants/sipeed_maix_bit/pins_arduino.h
View File

@@ -18,45 +18,58 @@ extern class UARTClass Serial3;
#endif
/* BOARD PIN DEFINE */
/* UARTHS */
#define RX0 4
#define TX0 5
/* UART */
#define RX1 6
#define TX1 7
// #define IO_8 8
// #define IO_9 9
// #define IO_10 10
/* LEDs */
#define PIN_LED_GREEN 13
#define PIN_LED_BLUE 12
#define PIN_LED_RED 14
#define PIN_LED 13
#define LED_BUILTIN 13
#define LED_GREEN 13
#define LED_BLUE 12
#define LED_RED 14
/* KEY */
#define KEY0 16
/* MIC ARRAY */
#define PIN_LED_GREEN 12
#define PIN_LED_RED 13
#define PIN_LED_BLUE 14
#define PIN_LED 12
#define LED_RED 13
#define LED_GREEN 12
#define LED_BLUE 14
#define LED_BUILTIN 12
// #define IO_15 15
// #define IO_17 17
/* I2S MIC */
#define MIC_BCK 18
#define MIC_WS 19
#define MIC_DAT3 20
#define MIC_DAT2 21
#define MIC_DAT1 22
#define MIC_DAT0 23
#define MIC_LED_DAT 24
// #define IO_21 21
// #define IO_22 22
// #define IO_23 23
// #define IO_24 24
// #define IO_25 25
/* SPI0 */
#define SPI0_CS1 25
#define SPI0_MISO 26
#define SPI0_SCLK 27
#define SPI0_MOSI 28
#define SPI0_CS0 29
// #define SCL 30
// #define SDA 31
// #define IO_30 30
// #define IO_31 31
// #define IO_32 32
// #define IO_33 33
// #define IO_34 34
// #define IO_35 35
/* LCD */
#define LCD_CS 36
#define LCD_RST 37
#define LCD_DC 38
#define LCD_WR 39
#define RX0 4
#define TX0 5
#define RX1 6
#define TX1 7
#define SDA 31
#define SCL 30
#define MD_PIN_MAP(fpio) (fpio)
#define ORG_PIN_MAP(org_pin) (org_pin)
@@ -70,8 +83,7 @@ typedef struct _pwm_fpio_set_t{
pwm_channel_number_t channel;
pwm_device_number_t device;
uint8_t inuse;
}pwm_fpio_set_t;
} pwm_fpio_set_t;
#define VARIANT_NUM_GPIOHS (32)

62
variants/sipeed_maix_bit_mic/pins_arduino.h
View File

@@ -18,45 +18,56 @@ extern class UARTClass Serial3;
#endif
/* BOARD PIN DEFINE */
/* UARTHS */
#define RX0 4
#define TX0 5
/* UART */
#define RX1 6
#define TX1 7
#define IO_8 8
#define IO_9 9
#define IO_10 10
/* LEDs */
#define PIN_LED_GREEN 13
#define PIN_LED_BLUE 12
#define PIN_LED_RED 14
#define PIN_LED 13
#define LED_BUILTIN 13
#define LED_GREEN 13
#define LED_BLUE 12
#define LED_RED 14
/* KEY */
#define KEY0 16
/* MIC ARRAY */
#define PIN_LED_GREEN 12
#define PIN_LED_RED 13
#define PIN_LED_BLUE 14
#define PIN_LED 12
#define LED_RED 13
#define LED_GREEN 12
#define LED_BLUE 14
#define LED_BUILTIN 12
// #define IO_15 15
// #define IO_17 17
/* I2S MIC */
#define MIC_BCK 18
#define MIC_WS 19
#define MIC_DAT3 20
#define MIC_DAT2 21
#define MIC_DAT1 22
#define MIC_DAT0 23
#define MIC_LED_DAT 24
// #define IO_21 21
// #define IO_22 22
// #define IO_23 23
// #define IO_24 24
// #define IO_25 25
/* SPI0 */
#define SPI0_CS1 25
#define SPI0_MISO 26
#define SPI0_SCLK 27
#define SPI0_MOSI 28
#define SPI0_CS0 29
// #define SCL 30
// #define SDA 31
// #define IO_30 30
// #define IO_31 31
// #define IO_32 32
// #define IO_33 33
// #define IO_34 34
// #define IO_35 35
/* LCD */
#define LCD_CS 36
#define LCD_RST 37
#define LCD_DC 38
#define LCD_WR 39
#define RX0 4
#define TX0 5
#define RX1 6
#define TX1 7
#define SDA 31
#define SCL 30
#define MD_PIN_MAP(fpio) (fpio)
#define ORG_PIN_MAP(org_pin) (org_pin)
@@ -70,8 +81,7 @@ typedef struct _pwm_fpio_set_t{
pwm_channel_number_t channel;
pwm_device_number_t device;
uint8_t inuse;
}pwm_fpio_set_t;
} pwm_fpio_set_t;
#define VARIANT_NUM_GPIOHS (32)

99
variants/sipeed_maix_cube/pins_arduino.h Normal file
View File

@@ -0,0 +1,99 @@
#ifndef _VARIANT_SIPEED_MAIX_CUBE
#define _VARIANT_SIPEED_MAIX_CUBE
#include <stdint.h>
#define RISCV
#include "platform.h"
#include "Arduino.h"
#include "pwm.h"
#ifdef __cplusplus
#include "UARTClass.h"
extern class UARTHSClass Serial;
extern class UARTClass Serial1;
extern class UARTClass Serial2;
extern class UARTClass Serial3;
#endif
/* BOARD PIN DEFINE */
/* UARTHS CH552T */
#define RX0 4
#define TX0 5
/* SPMOD */
#define RX1 6
#define TX1 7
// #define IO_8 8
// #define IO_9 9
/* KEYs */
#define KEY1 10
#define KEY2 11
#define PIN_KEY_DOWN 10
#define PIN_KEY_UP 11
/* LEDs */
#define PIN_LED_GREEN 12
#define PIN_LED_RED 13
#define PIN_LED_BLUE 14
#define PIN_LED 12
#define LED_RED 13
#define LED_GREEN 12
#define LED_BLUE 14
#define LED_BUILTIN 12
/* SPMOD */
// #define IO_15 15
// #define IO_20 20
// #define IO_21 21
/* I2S AUDIO CODEC ES8374 */
#define I2S_DIN 18
#define I2S_MCLK 19
#define I2S_LRCK 33
#define I2S_DOUT 34
#define I2S_SCLK 35
/* USB_SBU */
// #define IO_22 22
// #define IO_23 23
/* GROVE */
// #define IO_24 24
// #define IO_25 25
/* SPI0 */
#define SPI0_MISO 26
#define SPI0_SCLK 27
#define SPI0_MOSI 28
#define SPI0_CS0 29
/* I2C1 - AXP173, MSA301*/
#define SCL 30
#define SDA 31
/* Flash LED */
#define WLED_EN 32
/* LCD */
#define LCD_BL 17
#define LCD_CS 36
#define LCD_RST 37
#define LCD_DC 38
#define LCD_WR 39
#define MD_PIN_MAP(fpio) (fpio)
#define ORG_PIN_MAP(org_pin) (org_pin)
static const uint8_t SS = SPI0_CS0 ;
static const uint8_t MOSI = SPI0_MOSI;
static const uint8_t MISO = SPI0_MISO;
static const uint8_t SCK = SPI0_SCLK;
typedef struct _pwm_fpio_set_t{
pwm_channel_number_t channel;
pwm_device_number_t device;
uint8_t inuse;
} pwm_fpio_set_t;
#define VARIANT_NUM_GPIOHS (32)
#define VARIANT_NUM_GPIO ( 8)
#define VARIANT_NUM_PWM (12)
#define VARIANT_NUM_I2C ( 3)
#define VARIANT_NUM_SPI ( 3)
#define VARIANT_NUM_UART ( 3)
#endif

53
variants/sipeed_maix_go/pins_arduino.h
View File

@@ -1,5 +1,5 @@
#ifndef _VARIANT_BOARD_SIPEED_MAIX_GO
#define _VARIANT_BOARD_SIPEED_MAIX_GO
#ifndef _VARIANT_SIPEED_MAIX_GO
#define _VARIANT_SIPEED_MAIX_GO
#include <stdint.h>
@@ -18,21 +18,37 @@ extern class UARTClass Serial3;
#endif
/* BOARD PIN DEFINE */
/* UARTHS */
#define RX0 4
#define TX0 5
/* WIFI UART1 */
#define RX1 6
#define TX1 7
#define ESP_TX 6
#define ESP_RX 7
#define ESP_EN 8
/* BPSK */
#define BPSK_P 9
#define BPSK_N 10
// #define IO_11 11
/* LEDs */
#define PIN_LED_GREEN 13
#define PIN_LED_BLUE 12
#define PIN_LED_GREEN 13
#define PIN_LED_RED 14
#define PIN_LED 13
#define LED_BUILTIN 13
#define LED_RED 14
#define LED_GREEN 13
#define LED_BLUE 12
#define LED_RED 14
#define LED_BUILTIN 13
/* KEY */
#define KEY0 15
#define PIN_KEY_DOWN 16
#define KEY1 15
#define KEY0 16
#define KEY2 17
#define PIN_KEY_DOWN 15
#define PIN_KEY_PRESS 16
#define PIN_KEY_UP 17
#define PIN_KEY_PRESS 15
/* MIC ARRAY */
/* I2S MIC MSM261S4030H0 */
#define MIC_BCK 18
#define MIC_WS 19
#define MIC_DAT3 20
@@ -40,13 +56,17 @@ extern class UARTClass Serial3;
#define MIC_DAT1 22
#define MIC_DAT0 23
#define MIC_LED_DAT 24
/* SPI0 */
#define SPI0_CS1 25
#define MIC_LED_CLK 25
/* SPI0 TF */
#define SPI0_MISO 26
#define SPI0_SCLK 27
#define SPI0_MOSI 28
#define SPI0_CS0 29
/* I2S */
/* I2C1 MSA300 */
#define SCL 30
#define SDA 31
// #define IO_32 32
/* I2S DAC PT8211 */
#define I2S_WS 33
#define I2S_DA 34
#define I2S_BCK 35
@@ -56,14 +76,6 @@ extern class UARTClass Serial3;
#define LCD_DC 38
#define LCD_WR 39
#define RX0 4
#define TX0 5
#define RX1 6
#define TX1 7
#define SDA 31
#define SCL 30
#define MD_PIN_MAP(fpio) (fpio)
#define ORG_PIN_MAP(org_pin) (org_pin)
@@ -77,8 +89,7 @@ typedef struct _pwm_fpio_set_t{
pwm_channel_number_t channel;
pwm_device_number_t device;
uint8_t inuse;
}pwm_fpio_set_t;
} pwm_fpio_set_t;
#define VARIANT_NUM_GPIOHS (32)

24
variants/sipeed_maix_one_dock/pins_arduino.h
View File

@@ -1,5 +1,5 @@
#ifndef _VARIANT_SIPEED_M1_DOCK
#define _VARIANT_SIPEED_M1_DOCK
#ifndef _VARIANT_SIPEED_MAIX_ONE_DOCK
#define _VARIANT_SIPEED_MAIX_ONE_DOCK
#include <stdint.h>
@@ -18,17 +18,23 @@ extern class UARTClass Serial3;
#endif
/* BOARD PIN DEFINE */
/* UARTHS */
#define RX0 4
#define TX0 5
/* WIFI UART1 */
#define RX1 6
#define TX1 7
/* LEDs */
#define PIN_LED_GREEN 13
#define PIN_LED_BLUE 12
#define PIN_LED_RED 14
#define PIN_LED 13
#define LED_BUILTIN 13
#define LED_RED 14
#define LED_GREEN 13
#define LED_BLUE 12
#define LED_RED 14
#define LED_BUILTIN 13
/* KEY */
#define KEY0 16
//#define KEY0 16
/* MIC ARRAY */
#define MIC_BCK 18
#define MIC_WS 19
@@ -56,14 +62,6 @@ extern class UARTClass Serial3;
#define LCD_DC 38
#define LCD_WR 39
#define RX0 4
#define TX0 5
#define RX1 6
#define TX1 7
#define SDA 31
#define SCL 30
#define MD_PIN_MAP(fpio) (fpio)
#define ORG_PIN_MAP(org_pin) (org_pin)

90
variants/sipeed_maix_one_w_dock/pins_arduino.h Normal file
View File

@@ -0,0 +1,90 @@
#ifndef _VARIANT_SIPEED_MAIX_ONE_W_DOCK
#define _VARIANT_SIPEED_MAIX_ONE_W_DOCK
#include <stdint.h>
#define RISCV
#include "platform.h"
#include "Arduino.h"
#include "pwm.h"
#ifdef __cplusplus
#include "UARTClass.h"
extern class UARTHSClass Serial;
extern class UARTClass Serial1;
extern class UARTClass Serial2;
extern class UARTClass Serial3;
#endif
/* BOARD PIN DEFINE */
/* UARTHS */
#define RX0 4
#define TX0 5
/* WIFI UART1 */
#define RX1 6
#define TX1 7
/* LEDs */
#define PIN_LED_RED 14
#define PIN_LED_GREEN 13
#define PIN_LED_BLUE 12
#define PIN_LED 13
#define LED_RED 14
#define LED_GREEN 13
#define LED_BLUE 12
#define LED_BUILTIN 13
/* KEY */
//#define KEY0 16
/* MIC ARRAY */
#define MIC_BCK 18
#define MIC_WS 19
#define MIC_DAT3 20
#define MIC_DAT2 21
#define MIC_DAT1 22
#define MIC_DAT0 23
#define MIC_LED_DAT 24
/* SPI0 */
#define SPI0_CS1 25
#define SPI0_MISO 26
#define SPI0_SCLK 27
#define SPI0_MOSI 28
#define SPI0_CS0 29
/* I2S */
#define MIC0_WS 30
#define MIC0_DATA 31
#define MIC0_BCK 32
#define I2S_WS 33
#define I2S_DA 34
#define I2S_BCK 35
/* LCD */
#define LCD_CS 36
#define LCD_RST 37
#define LCD_DC 38
#define LCD_WR 39
#define MD_PIN_MAP(fpio) (fpio)
#define ORG_PIN_MAP(org_pin) (org_pin)
static const uint8_t SS = SPI0_CS0 ;
static const uint8_t MOSI = SPI0_MOSI;
static const uint8_t MISO = SPI0_MISO;
static const uint8_t SCK = SPI0_SCLK;
typedef struct _pwm_fpio_set_t{
pwm_channel_number_t channel;
pwm_device_number_t device;
uint8_t inuse;
}pwm_fpio_set_t;
#define VARIANT_NUM_GPIOHS (32)
#define VARIANT_NUM_GPIO ( 8)
#define VARIANT_NUM_PWM (12)
#define VARIANT_NUM_I2C ( 3)
#define VARIANT_NUM_SPI ( 3)
#define VARIANT_NUM_UART ( 3)
#endif

49
variants/sipeed_maixduino/pins_arduino.h
View File

@@ -18,47 +18,48 @@ extern class UARTClass Serial3;
#endif
/* BOARD PIN DEFINE */
#define RX0 0
#define TX0 1
/* LEDs (USE Builtin TX PIN led)*/
#define PIN_LED 1
#define LED_BUILTIN 1
#define PIN_LED_RED 13
#define PIN_LED_GREEN 12
#define PIN_LED_BLUE 14
#define PIN_LED 12
#define LED_RED 13
#define LED_GREEN 12
#define LED_BLUE 14
#define LED_BUILTIN 12
/* KEY */
#define KEY0 16
/* MIC ARRAY */
#define MIC_BCK 18
#define MIC_WS 19
#define MIC_DAT3 20
#define MIC_DAT2 21
#define MIC_DAT1 22
#define MIC_DAT0 23
#define MIC_LED_DAT 24
//#define KEY0 16
/* ONBOARD ESP32 */
#define ESP_TX 6
#define ESP_RX 7
#define ESP_EN 8
#define ESP_READY 9
#define ESP_SPI_CS 25
/* SPI0 */
#define SPI0_CS1 25
#define SPI0_MISO 26
#define SPI0_SCLK 27
#define SPI0_MOSI 28
#define SPI0_CS0 29
/* I2S */
#define MIC0_WS 30
#define MIC0_DATA 31
#define MIC0_BCK 32
#define MIC_BCK 18
#define MIC_WS 19
#define MIC_DATA 20
/* I2C1 */
#define SCL 30
#define SDA 31
/* DAC PT8211 */
#define I2S_WS 33
#define I2S_DA 34
#define I2S_BCK 35
/* LCD */
#define LCD_BL 17
#define LCD_CS 36
#define LCD_RST 37
#define LCD_DC 38
#define LCD_WR 39
#define RX0 0
#define TX0 1
#define RX1 6
#define TX1 7
#define SDA 31
#define SCL 30
static const uint8_t SS = SPI0_CS0 ;
static const uint8_t MOSI = SPI0_MOSI;