2.2 KiB
Build instructions for Embedded (ARM port)
First clone, initialize submodules and install Poetry as defined here.
Do not forget you need to be in a poetry shell environment!
Requirements
You will need the GCC ARM toolchain for building and OpenOCD for flashing to a device. You will also need Python dependencies for signing.
Debian/Ubuntu
sudo apt-get install scons gcc-arm-none-eabi libnewlib-arm-none-eabi llvm-dev libclang-dev clang
NixOS
There is a shell.nix file in the root of the project. Just run the following
before entering the core directory:
nix-shell
OS X
Consider using Nix. With Nix all you need to do is nix-shell.
For other users:
- Download gcc-arm-none-eabi
- Follow the install instructions
- To install OpenOCD, run
brew install open-ocd - Run
make vendor build_boardloader build_bootloader build_firmware
Rust
Install the appropriate target with rustup:
rustup target add thumbv7em-none-eabihf # for TT
rustup target add thumbv7m-none-eabi # for T1
Building
make vendor build_boardloader build_bootloader build_firmware
Uploading
Use make upload to upload the firmware to a production device. Do not forget to enter bootloader on the device beforehand.
Flashing
For flashing firmware to blank device (without bootloader) use make flash.
You need to have OpenOCD installed.
Building in debug mode
You can also build firmware in debug mode to see log output or run tests.
PYOPT=0 make build_firmware
To get a full debug build, use:
make build_firmware BITCOIN_ONLY=0 PYOPT=0
Use screen to enter the device's console. Do not forget to add your user to the dialout group or use sudo. Note that both the group and the tty name can differ, use ls -l /dev/tty* or ls /dev/tty* | grep usb to find out proper names on your machine.
screen /dev/ttyACM0