hackrf

mirror of https://github.com/greatscottgadgets/hackrf.git synced 2026-03-06 07:25:37 +01:00

Files

Dominic Spill acaf0d192c Change RFFC5071 clock from 40MHz to 50MHz and invert it

Now the MAX2837 and RFFC5071 clocks are out of phase with each other
Hopefully this reduces some noise

2017-02-21 17:56:37 -07:00

xapp058

Fix include paths

2015-07-22 22:56:17 +02:00

bitband.c

Fix-ups to copyrights -- missing e-mail address and inconsistent formatting.

2012-10-06 19:14:55 -07:00

bitband.h

Fix-ups to copyrights -- missing e-mail address and inconsistent formatting.

2012-10-06 19:14:55 -07:00

cpld_jtag.c

Use new GPIO API to abstract GPIO in various drivers.

2014-11-15 16:26:59 -08:00

cpld_jtag.h

Use new GPIO API to abstract GPIO in various drivers.

2014-11-15 16:26:59 -08:00

fault_handler.c

Add GCC "used" attribute to prevent hard_fault_handler_c() from being removed. It trips up -flto.

2014-08-11 16:07:59 -07:00

fault_handler.h

Added fault handler header file, where I've defined the Cortex-M3/M4 SCB using a struct instead of a slew of #defines. This deviates from the libopencm3 method, but is superior in other ways. So, there you go. It's not in libopencm3, it's here.

2012-10-10 13:36:10 -07:00

gpdma.c

Add GPDMA LLI functions to create a loop or one-shot chain of LLIs.

2013-12-08 18:18:22 -08:00

gpdma.h

Add GPDMA LLI functions to create a loop or one-shot chain of LLIs.

2013-12-08 18:18:22 -08:00

gpio_lpc.c

Use new GPIO API to abstract GPIO in various drivers.

2014-11-15 16:26:59 -08:00

gpio_lpc.h

Use new GPIO API to abstract GPIO in various drivers.

2014-11-15 16:26:59 -08:00

gpio.h

Use new GPIO API to abstract GPIO in various drivers.

2014-11-15 16:26:59 -08:00

hackrf_core.c

Change RFFC5071 clock from 40MHz to 50MHz and invert it

2017-02-21 17:56:37 -07:00

hackrf_core.h

Remove Jellybean support from firmware

2017-02-14 21:33:52 -07:00

hackrf-ui.h

fix(hackrf-ui): Make the calls weak

2015-12-09 22:26:16 +01:00

i2c_bus.c

I2C: Interface: Rename init()->start(), add stop().

2014-11-13 10:32:38 -08:00

i2c_bus.h

I2C: Interface: Rename init()->start(), add stop().

2014-11-13 10:32:38 -08:00

i2c_lpc.c

Fix multibyte reads over i2c

2016-12-13 19:05:49 -07:00

i2c_lpc.h

I2C: Interface: Rename init()->start(), add stop().

2014-11-13 10:32:38 -08:00

LPC43xx_M0_memory.ld

Break ldscripts into smaller pieces that can be shared.

2014-01-11 17:38:27 -08:00

LPC43xx_M4_M0_image_from_text.ld

Rename ldscript to be the one and only M0 embedding .ld, reading from .text.

2014-02-18 16:48:21 -08:00

LPC43xx_M4_memory.ld

Break ldscripts into smaller pieces that can be shared.

2014-01-11 17:38:27 -08:00

LPC4320_M4_memory.ld

Break ldscripts into smaller pieces that can be shared.

2014-01-11 17:38:27 -08:00

LPC4330_M4_memory.ld

Reinstate LPC4330 linker script

2017-02-17 07:49:16 -07:00

m0_bin.s.cmake

Firmware build system is now CMake, and seems much more sane on the whole.

2014-08-11 16:37:14 -07:00

m0_sleep.c

Add default M0 code that just loops forever, if a project doesn't specify any SRC_M0_[CS] files.

2013-11-20 15:11:54 -08:00

max2837_regs.def

MAX2837: De-singleton the driver.

2014-11-10 16:37:34 -08:00

max2837_target.c

Remove Jellybean support from firmware

2017-02-14 21:33:52 -07:00

max2837_target.h

Use new GPIO API to abstract GPIO in various drivers.

2014-11-15 16:26:59 -08:00

max2837.c

Merge remote-tracking branch 'mossmann/master' into rad1o

2017-01-26 00:21:58 +01:00

max2837.h

Remove Jellybean support from firmware

2017-02-14 21:33:52 -07:00

max2871_regs.c

feat(max2871.c): POC

2015-06-07 17:07:36 +02:00

max2871_regs.h

refact(mixer): Basic mixer abstraction

2017-01-26 00:31:43 +01:00

max2871.c

chore(rad1o): White space fixes and cleanup

2017-02-03 19:27:19 +01:00

max2871.h

feat(mixer): Full MAX2871 integration for rad1o

2017-01-27 21:41:24 +01:00

max5864_target.c

Use new GPIO API to abstract GPIO in various drivers.

2014-11-15 16:26:59 -08:00

max5864_target.h

Use new GPIO API to abstract GPIO in various drivers.

2014-11-15 16:26:59 -08:00

max5864.c

SPI: Rename spi_t to spi_bus_t to match I2C naming.

2014-11-13 10:16:39 -08:00

max5864.h

SPI: Rename spi_t to spi_bus_t to match I2C naming.

2014-11-13 10:16:39 -08:00

mixer.c

fix(mixer): Use correct pins for MAX2871

2017-01-28 22:31:00 +01:00

mixer.h

feat(mixer): Full MAX2871 integration for rad1o

2017-01-27 21:41:24 +01:00

operacake.c

fixed operacake indentation warning in firmware

2017-01-26 15:24:55 -07:00

operacake.h

Tidy unused operacake code and use addresses to refer to boards

2016-12-25 11:01:55 +00:00

README

started firmware directory with some basic stuff

2012-05-21 11:33:46 -06:00

rf_path.c

chore(rad1o): White space fixes and cleanup

2017-02-03 19:27:19 +01:00

rf_path.h

fix(rf_path): Port rad1o pin config

2017-01-27 20:45:49 +01:00

rffc5071_regs.def

RFFC507x: De-singleton the driver code.

2014-11-10 16:42:08 -08:00

rffc5071_spi.c

Speed up RFFC5072 comms by 50%!

2016-12-27 21:08:12 +00:00

rffc5071_spi.h

Use new GPIO API to abstract GPIO in various drivers.

2014-11-15 16:26:59 -08:00

rffc5071.c

Change RFFC5071 clock from 40MHz to 50MHz and invert it

2017-02-21 17:56:37 -07:00

rffc5071.h

fix(common, hackf_usb): Make it compile for rad10

2015-06-06 18:49:09 +02:00

rom_iap.c

SPI: Rename spi_t to spi_bus_t to match I2C naming.

2014-11-13 10:16:39 -08:00

rom_iap.h

Add host(hackrf_info)/fw(usb_performance) IAP read part id/serial no(to be confirmed).

2013-03-09 11:47:28 +01:00

sgpio.c

chore(rad1o): White space fixes and cleanup

2017-02-03 19:27:19 +01:00

sgpio.h

Use new GPIO API to abstract GPIO in various drivers.

2014-11-15 16:26:59 -08:00

si5351c.c

Clean up Si5351c initialisation code

2017-02-21 17:43:19 -07:00

si5351c.h

Si5351C: Bring I2C wrapper into main driver.

2014-11-12 18:32:00 -08:00

spi_bus.c

SPI: Rename spi_t to spi_bus_t to match I2C naming.

2014-11-13 10:16:39 -08:00

spi_bus.h

SPI: Rename spi_t to spi_bus_t to match I2C naming.

2014-11-13 10:16:39 -08:00

spi_ssp.c

Use new GPIO API to abstract GPIO in various drivers.

2014-11-15 16:26:59 -08:00

spi_ssp.h

Use new GPIO API to abstract GPIO in various drivers.

2014-11-15 16:26:59 -08:00

streaming.c

Merge branch 'multi-device-hardware-sync' of https://github.com/dodgymike/hackrf into dodgymike-multi-device-hardware-sync

2017-01-24 16:18:33 -07:00

streaming.h

Use new GPIO API to abstract GPIO in various drivers.

2014-11-15 16:26:59 -08:00

tuning.c

fix(rad1o): Restore hackrf max2837_freq_nominal_hz behaviour

2017-02-03 19:33:25 +01:00

tuning.h

replaced set_freq_if() with set_freq_explicit() and implemented explicit tuning option in hackrf_transfer

2014-03-13 16:06:51 -06:00

usb_queue.c

Move files that have no application-specific bits (e.g. USB stack, tuning, and RF path APIs) to ../common/.

2013-09-17 15:10:46 -07:00

usb_queue.h

Broke some application-specific USB code into separate files within hackrf_usb/. Hoping I can use them as necessary in other projects, or push them into a library eventually.

2013-09-19 19:51:32 -07:00

usb_request.c

Move files that have no application-specific bits (e.g. USB stack, tuning, and RF path APIs) to ../common/.

2013-09-17 15:10:46 -07:00

usb_request.h

Move files that have no application-specific bits (e.g. USB stack, tuning, and RF path APIs) to ../common/.

2013-09-17 15:10:46 -07:00

usb_standard_request.c

Add Windows Compatible ID descriptors

2016-07-17 22:20:32 +01:00

usb_standard_request.h

Add Windows Compatible ID descriptors

2016-07-17 22:20:32 +01:00

usb_type.h

Add Windows Compatible ID descriptors

2016-07-17 22:20:32 +01:00

usb.c

Merge remote-tracking branch 'mossmann/master' into opera-merge

2017-02-03 16:25:32 +01:00

usb.h

change(usb): Make usb_phy_enable() non static

2017-01-28 22:32:27 +01:00

w25q80bv_target.c

Use new GPIO API to abstract GPIO in various drivers.

2014-11-15 16:26:59 -08:00

w25q80bv_target.h

Use new GPIO API to abstract GPIO in various drivers.

2014-11-15 16:26:59 -08:00

w25q80bv.c

Merge remote-tracking branch 'mossmann/master' into rad1o

2017-01-26 00:21:58 +01:00

w25q80bv.h

Merge remote-tracking branch 'mossmann/master' into rad1o

2017-01-26 00:21:58 +01:00

README

This directory contains things shared by multiple HackRF firmware
implementations.