Tobias Schneider e612dfd8bf fix(usb): Use new USB PID: 0xCC15

2015-08-11 11:19:58 +02:00

..

CMakeLists.txt

Create separate CMake toolchain file. Add references to toolchain file in each firmware CMakeLists.txt. I suspect this can be simpler still, just not sure how, yet...

2014-08-11 16:43:58 -07:00

hackrf_usb.c

HACK: wait until si5351 is powered up

2015-07-28 02:51:52 +02:00

sgpio_isr.c

Remove sample-pair reordering in SGPIO interrupt -- CPLD fixes address this.

2013-11-16 13:32:41 -08:00

sgpio_isr.h

Move SGPIO ISRs to separate .c/.h files.

2013-09-08 15:10:19 -07:00

usb_api_board_info.c

Extracted USB API for board information into separate files.

2013-09-19 22:45:38 -07:00

usb_api_board_info.h

Extracted USB API for board information into separate files.

2013-09-19 22:45:38 -07:00

usb_api_cpld.c

Quiet warning about unused args in cpld_buffer_refilled().

2014-11-10 11:11:49 -08:00

usb_api_cpld.h

Move USB API for CPLD management into separate files.

2013-09-19 19:52:14 -07:00

usb_api_register.c

chore(name): We are now rad1o

2015-06-07 23:33:24 +02:00

usb_api_register.h

Moved USB API for manipulating RF chip registers into separate files.

2013-09-19 22:37:36 -07:00

usb_api_spiflash.c

Extracted USB API for SPI flash erase/write/read into separate files.

2013-09-19 22:29:49 -07:00

usb_api_spiflash.h

Extracted USB API for SPI flash erase/write/read into separate files.

2013-09-19 22:29:49 -07:00

usb_api_transceiver.c

replaced set_freq_if() with set_freq_explicit() and implemented explicit tuning option in hackrf_transfer

2014-03-13 16:06:51 -06:00

usb_api_transceiver.h

replaced set_freq_if() with set_freq_explicit() and implemented explicit tuning option in hackrf_transfer

2014-03-13 16:06:51 -06:00

usb_bulk_buffer.c

Remove usb_bulk_buffer declaration, it was causing duplicate buffers to exist in RAM. Allow ldscript to determine symbol's address by making buffer "extern" only.

2014-02-14 10:48:38 -08:00

usb_bulk_buffer.h

Remove usb_bulk_buffer declaration, it was causing duplicate buffers to exist in RAM. Allow ldscript to determine symbol's address by making buffer "extern" only.

2014-02-14 10:48:38 -08:00

usb_descriptor.c

fix(usb): Use new USB PID: 0xCC15

2015-08-11 11:19:58 +02:00

usb_descriptor.h

Create a #define/constant for the usb_descriptor_string_serial_number length.

2015-02-24 01:13:06 +02:00

usb_device.c

Broke some application-specific USB code into separate files within hackrf_usb/. Hoping I can use them as necessary in other projects, or push them into a library eventually.

2013-09-19 19:51:32 -07:00

usb_device.h

Broke some application-specific USB code into separate files within hackrf_usb/. Hoping I can use them as necessary in other projects, or push them into a library eventually.

2013-09-19 19:51:32 -07:00

usb_endpoint.c

Change USB bulk endpoint for baseband data to have only one queue item. Since there are only two baseband buffers, and one is transferring with the codec and the other with USB, enqueueing more than one buffer at a time would result in transferring an incomplete buffer.

2013-12-31 20:34:01 -08:00

usb_endpoint.h

Broke some application-specific USB code into separate files within hackrf_usb/. Hoping I can use them as necessary in other projects, or push them into a library eventually.

2013-09-19 19:51:32 -07:00