mirror of
https://github.com/greatscottgadgets/hackrf.git
synced 2026-03-09 08:48:30 +01:00
9206a8b752
The current code does reads and writes in two chunks: one of 6 words, followed by one of 2. Instead, use two chunks of 4 words each. This takes the same number of total cycles, but frees up two registers for other uses. Note that we can't do things in one chunk, because we'd need eight registers to hold the data, plus a ninth to hold the buffer pointer. The ldm/stm instructions can only use the eight low registers, r0-r7. So we have to use two chunks, and the most register-efficient way to do that is to use two equal chunks.
The primary firmware source code for USB HackRF devices is hackrf_usb. Most of the other directories contain firmware source code for test and development. The common directory contains source code shared by multiple HackRF firmware projects. The cpld directory contains HDL source for the CPLD. The firmware is set up for compilation with the GCC toolchain available here: https://developer.arm.com/open-source/gnu-toolchain/gnu-rm/downloads Required dependency: https://github.com/mossmann/libopencm3 If you are using git, the preferred way to install libopencm3 is to use the submodule: $ cd .. $ git submodule init $ git submodule update To build and install a standard firmware image for HackRF One: $ cd hackrf_usb $ mkdir build $ cd build $ cmake .. $ make $ hackrf_spiflash -w hackrf_usb.bin If you have a Jawbreaker, add -DBOARD=JAWBREAKER to the cmake command. If you have a rad1o, use -DBOARD=RAD1O instead. It is possible to use a USB Device Firmware Upgrade (DFU) method to load firmware into RAM. This is normally only required to recover a device that has had faulty firmware loaded, but it can also be useful for firmware developers. For loading firmware into RAM with DFU you will need: http://dfu-util.sourceforge.net/ To start up HackRF One in DFU mode, hold down the DFU button while powering it on or while pressing and releasing the RESET button. Release the DFU button after the 3V3 LED illuminates. A .dfu file is built by default when building firmware. Alternatively you can use a known good .dfu file from a release package. Load the firmware into RAM with: $ dfu-util --device 1fc9:000c --alt 0 --download hackrf_usb.dfu