hackrf

mirror of https://github.com/greatscottgadgets/hackrf.git synced 2026-03-03 14:06:49 +01:00

Files

Jared Boone bafe97e302 Extract knowledge of RF path configurations from the RFFC5071 driver.

Change initial RF path mode to SWITCHCTRL_SAFE. (Previously started at SWITCHCTRL_SAFE and then immediately switched to SWITCHCTRL_AMP_BYPASS.)

2013-09-07 12:59:57 -07:00

xapp058

jtagprog fixed. (to be checked by reading back the CPLD to be sure of the programming).

2013-02-23 18:52:56 +01:00

bitband.c

Fix-ups to copyrights -- missing e-mail address and inconsistent formatting.

2012-10-06 19:14:55 -07:00

bitband.h

Fix-ups to copyrights -- missing e-mail address and inconsistent formatting.

2012-10-06 19:14:55 -07:00

cpld_jtag.c

jtagprog fixed. (to be checked by reading back the CPLD to be sure of the programming).

2013-02-23 18:52:56 +01:00

cpld_jtag.h

jtagprog fixed. (to be checked by reading back the CPLD to be sure of the programming).

2013-02-23 18:52:56 +01:00

fault_handler.c

fault_handler add more info in case of crash.

2013-03-10 14:23:26 +01:00

fault_handler.h

Added fault handler header file, where I've defined the Cortex-M3/M4 SCB using a struct instead of a slew of #defines. This deviates from the libopencm3 method, but is superior in other ways. So, there you go. It's not in libopencm3, it's here.

2012-10-10 13:36:10 -07:00

hackrf_core.c

Adjusted cpu_clock_pll1_low_speed() to operate at 48MHz, as per several comments with the code. The actual MSEL value was previously selecting 84MHz.

2013-09-04 16:23:32 -07:00

hackrf_core.h

Fix for "issues/62 fix PLL1 overclock bug" see hackrf_core.c -> cpu_clock_init()

2013-08-28 22:01:57 +02:00

LPC4330_M4_rom_to_ram.ld

renamed LPC4330_M4_ROM_to_RAM.ld for case sensitive platforms like mine

2013-03-23 10:02:06 -06:00

LPC4330_M4.ld

Split ram_ahb memory region into two, with a 32K hole where the USB buffers live.

2012-10-10 14:27:21 -07:00

Makefile_inc.mk

A few more changes due to the libopencm3 merge

2013-07-07 17:48:54 -04:00

max2837_regs.def

firmware: gain control

2013-05-27 14:01:22 +02:00

max2837.c

Oops, missed a spot where I should've called a MAX2837 mode function.

2013-09-06 23:09:29 -07:00

max2837.h

Add MAX2837 mode set/get functions.

2013-09-06 22:29:57 -07:00

max5864.c

Use new ssp_transfer() function instead of ssp_write().

2012-10-13 16:58:22 -07:00

max5864.h

Fix-ups to copyrights -- missing e-mail address and inconsistent formatting.

2012-10-06 19:14:55 -07:00

README

started firmware directory with some basic stuff

2012-05-21 11:33:46 -06:00

rffc5071_regs.def

Fix overflows in shifts, suppress warnings for temporarily unused variables.

2012-09-04 20:08:30 -04:00

rffc5071.c

Extract knowledge of RF path configurations from the RFFC5071 driver.

2013-09-07 12:59:57 -07:00

rffc5071.h

Extract knowledge of RF path configurations from the RFFC5071 driver.

2013-09-07 12:59:57 -07:00

rom_iap.c

Cleanup on xxx_rom_to_ram directory now it contains only makefile, removed redundant .c file from xxx dir.

2013-04-07 18:55:12 +02:00

rom_iap.h

Add host(hackrf_info)/fw(usb_performance) IAP read part id/serial no(to be confirmed).

2013-03-09 11:47:28 +01:00

sgpio.c

Comment fix.

2013-04-04 19:48:28 +02:00

sgpio.h

Consolidated single-slice SGPIO configuration functions into single sgpio_configure() function.

2012-10-11 15:45:28 -07:00

si5351c.c

firmware: enable int mode if div is even integer

2013-06-07 23:10:35 +02:00

si5351c.h

firmware: fix a warning

2013-06-09 09:15:35 -06:00

w25q80bv.c

Cleanup on xxx_rom_to_ram directory now it contains only makefile, removed redundant .c file from xxx dir.

2013-04-07 18:55:12 +02:00

w25q80bv.h

Cleanup on xxx_rom_to_ram directory now it contains only makefile, removed redundant .c file from xxx dir.

2013-04-07 18:55:12 +02:00

README

This directory contains things shared by multiple HackRF firmware
implementations.