Jared Boone 5a77d196ea W25Q80BV: Separate structures into algorithm and hardware access layers. ...

Also extract #define constants for W25Q80BV into driver structure. Driver could eventually extend to other devices.

2014-11-10 16:46:12 -08:00

..

CMakeLists.txt

W25Q80BV: Extract hardware-specific code into separate layer.

2014-11-10 16:45:23 -08:00

hackrf_usb.c

si5351c_activate_best_clock_source() when starting RX or TX

2014-07-01 15:21:36 -06:00

sgpio_isr.c

Remove sample-pair reordering in SGPIO interrupt -- CPLD fixes address this.

2013-11-16 13:32:41 -08:00

sgpio_isr.h

Move SGPIO ISRs to separate .c/.h files.

2013-09-08 15:10:19 -07:00

usb_api_board_info.c

Extracted USB API for board information into separate files.

2013-09-19 22:45:38 -07:00

usb_api_board_info.h

Extracted USB API for board information into separate files.

2013-09-19 22:45:38 -07:00

usb_api_cpld.c

Quiet warning about unused args in cpld_buffer_refilled().

2014-11-10 11:11:49 -08:00

usb_api_cpld.h

Move USB API for CPLD management into separate files.

2013-09-19 19:52:14 -07:00

usb_api_register.c

RFFC507x: De-singleton the driver code.

2014-11-10 16:42:08 -08:00

usb_api_register.h

Moved USB API for manipulating RF chip registers into separate files.

2013-09-19 22:37:36 -07:00

usb_api_spiflash.c

W25Q80BV: Separate structures into algorithm and hardware access layers.

2014-11-10 16:46:12 -08:00

usb_api_spiflash.h

Extracted USB API for SPI flash erase/write/read into separate files.

2013-09-19 22:29:49 -07:00

usb_api_transceiver.c

MAX2837: De-singleton the driver.

2014-11-10 16:37:34 -08:00

usb_api_transceiver.h

replaced set_freq_if() with set_freq_explicit() and implemented explicit tuning option in hackrf_transfer

2014-03-13 16:06:51 -06:00

usb_bulk_buffer.c

Remove usb_bulk_buffer declaration, it was causing duplicate buffers to exist in RAM. Allow ldscript to determine symbol's address by making buffer "extern" only.

2014-02-14 10:48:38 -08:00

usb_bulk_buffer.h

Remove usb_bulk_buffer declaration, it was causing duplicate buffers to exist in RAM. Allow ldscript to determine symbol's address by making buffer "extern" only.

2014-02-14 10:48:38 -08:00

usb_descriptor.c

firmware support for HackRF One USB ID

2014-03-12 16:21:20 -06:00

usb_descriptor.h

cpld: Stream CPLD data from host

2013-09-14 18:24:25 -04:00

usb_device.c

Broke some application-specific USB code into separate files within hackrf_usb/. Hoping I can use them as necessary in other projects, or push them into a library eventually.

2013-09-19 19:51:32 -07:00

usb_device.h

Broke some application-specific USB code into separate files within hackrf_usb/. Hoping I can use them as necessary in other projects, or push them into a library eventually.

2013-09-19 19:51:32 -07:00

usb_endpoint.c

Change USB bulk endpoint for baseband data to have only one queue item. Since there are only two baseband buffers, and one is transferring with the codec and the other with USB, enqueueing more than one buffer at a time would result in transferring an incomplete buffer.

2013-12-31 20:34:01 -08:00

usb_endpoint.h

Broke some application-specific USB code into separate files within hackrf_usb/. Hoping I can use them as necessary in other projects, or push them into a library eventually.

2013-09-19 19:51:32 -07:00