hackrf

mirror of https://github.com/greatscottgadgets/hackrf.git synced 2026-03-06 07:25:37 +01:00

Files

Jared Boone 4ad3680428 Break SGPIO interrupt handlers in two -- RX and TX.

Assign an SGPIO interrupt handler function at runtime, based on RX or TX mode. NOTE: This is incompatible with placing the vector table in ROM, which is fine on a device with no internal flash).
Remove SGPIO interrupt-time dependency on volatile transceiver_mode variable. Side effect is that a few cycles are probably saved inside the SGPIO interrupt.

2013-09-07 21:04:36 -07:00

blinky

firmware/: Use uint32_t instead of u32

2013-07-07 17:48:54 -04:00

blinky_rom_to_ram

Cleanup on xxx_rom_to_ram directory now it contains only makefile, removed redundant .c file from xxx dir.

2013-04-07 18:55:12 +02:00

common

Extract knowledge of RF path configurations from the RFFC5071 driver.

2013-09-07 12:59:57 -07:00

cpld

moved cpld stuff out of hardware/jellybean where people would be unlikely to look for it

2013-05-18 09:48:37 -06:00

cpldjtagprog

sgpio_if (top.vhd) CPLD VHDL fix for IQ/aliasing problems for ADC. (cpldjtagprog => sgpio_if_xsvf.h updated to rebuild).

2013-04-04 19:43:30 +02:00

cpldjtagprog_rom_to_ram

Cleanup on xxx_rom_to_ram directory now it contains only makefile, removed redundant .c file from xxx dir.

2013-04-07 18:55:12 +02:00

hackrf_usb

Break SGPIO interrupt handlers in two -- RX and TX.

2013-09-07 21:04:36 -07:00

hackrf_usb_rom_to_ram

renamed usb_performance to hackrf_usb

2013-05-18 08:51:34 -06:00

libopencm3 @ f92dbcdf60

Update libopencm3 submodule commit.

2013-09-06 16:02:01 -07:00

mixertx

Merge branch 'master' of https://github.com/mossmann/hackrf

2012-09-04 09:24:18 -07:00

sgpio

Consolidate a few clock setup tasks that repeat among many projects into cpu_clock_init().

2012-10-17 11:45:30 -07:00

sgpio_passthrough_rom_to_ram

Fixed some makefile and set default BOARD to JAWBREAKER (instead of JELLYBEAN).

2013-02-10 18:33:01 +01:00

sgpio-rx

firmware, lib: update comments, doc

2013-06-17 12:32:12 +02:00

simpletx

Moving gpio_setup() / pin_setup() functions in separate projects to hackrf_core.h/c.

2012-07-31 21:38:57 -07:00

spiflash

induce fewer seizures

2013-02-22 18:41:46 -07:00

startup

firmware/: Use uint32_t instead of u32

2013-07-07 17:48:54 -04:00

startup_systick

firmware/: Update #includes for libopencm3 merge

2013-07-07 17:48:54 -04:00

startup_systick_perfo

firmware/: Update #includes for libopencm3 merge

2013-07-07 17:48:54 -04:00

startup_systick_perfo_rom_to_ram

Cleanup on xxx_rom_to_ram directory now it contains only makefile, removed redundant .c file from xxx dir.

2013-04-07 18:55:12 +02:00

tools

Added two CGU debugging tools:

2013-09-04 16:34:20 -07:00

.gitignore

.gitignore additions: .dfu in /firmware, .pdf and .svg in /hardware

2013-03-07 14:56:32 -07:00

Makefile

renamed usb_performance to hackrf_usb

2013-05-18 08:51:34 -06:00

README

added dfu-util requirement

2013-08-11 14:56:32 -06:00

README

The primary firmware source code for USB HackRF devices is hackrf_usb.  Most of
the other directories contain firmware source code for test and development.
The common directory contains source code shared by multiple HackRF firmware
projects.  The cpld directory contains HDL source for the CPLD present on the
Jawbreaker and Jellybean designs.

The firmware is set up for compilation with the GCC toolchain available here:

https://code.launchpad.net/gcc-arm-embedded

Required dependency:

https://github.com/mossmann/libopencm3

For loading firmware into RAM with DFU you will also need:

git://git.openezx.org/dfu-util.git