hackrf

mirror of https://github.com/greatscottgadgets/hackrf.git synced 2026-03-04 06:25:25 +01:00

Files

Jared Boone 3bf6573dc6 Add skip-every-N function to CPLD, where N is controlled by three input pins from the microcontroller.

Updated SGPIO CPLD testbench, as it had fallen a bit out of date.
Add SGPIO API initialization and control of CPLD decimation feature.

2013-11-19 19:52:06 -08:00

xapp058

xapp058/ports: Clean up comments and dead code

2013-09-14 18:24:25 -04:00

bitband.c

Fix-ups to copyrights -- missing e-mail address and inconsistent formatting.

2012-10-06 19:14:55 -07:00

bitband.h

Fix-ups to copyrights -- missing e-mail address and inconsistent formatting.

2012-10-06 19:14:55 -07:00

cpld_jtag.c

cpld: Stream CPLD data from host

2013-09-14 18:24:25 -04:00

cpld_jtag.h

cpld: Stream CPLD data from host

2013-09-14 18:24:25 -04:00

fault_handler.c

fault_handler add more info in case of crash.

2013-03-10 14:23:26 +01:00

fault_handler.h

Added fault handler header file, where I've defined the Cortex-M3/M4 SCB using a struct instead of a slew of #defines. This deviates from the libopencm3 method, but is superior in other ways. So, there you go. It's not in libopencm3, it's here.

2012-10-10 13:36:10 -07:00

hackrf_core.c

Changes due to CGU header API changes.

2013-11-15 11:41:20 -08:00

hackrf_core.h

Add miscellaneous Jawbreaker pins SCU #defines.

2013-09-20 14:19:07 -07:00

LPC4330_M4_rom_to_ram.ld

Break off a chunk of local RAM to serve the M0 processor.

2013-09-20 20:03:24 -07:00

LPC4330_M4.ld

Break off a chunk of local RAM to serve the M0 processor.

2013-09-20 20:03:24 -07:00

Makefile_inc.mk

Adjust Makefile_inc.mk to serve both M0 and M4 targets through the LPC43XX_TARGET variable.

2013-09-20 20:04:28 -07:00

max2837_regs.def

firmware: gain control

2013-05-27 14:01:22 +02:00

max2837.c

Oops, missed a spot where I should've called a MAX2837 mode function.

2013-09-06 23:09:29 -07:00

max2837.h

Add MAX2837 mode set/get functions.

2013-09-06 22:29:57 -07:00

max5864.c

Use new ssp_transfer() function instead of ssp_write().

2012-10-13 16:58:22 -07:00

max5864.h

Fix-ups to copyrights -- missing e-mail address and inconsistent formatting.

2012-10-06 19:14:55 -07:00

README

started firmware directory with some basic stuff

2012-05-21 11:33:46 -06:00

rf_path.c

Don't put MAX2837 into shutdown mode -- powering up takes a bit too long (500us for PLL to stabilize). Will need to revisit, because the MAX2837 chews up significant current (35 to 45mA) when not in shutdown.

2013-09-22 11:52:45 -07:00

rf_path.h

Move files that have no application-specific bits (e.g. USB stack, tuning, and RF path APIs) to ../common/.

2013-09-17 15:10:46 -07:00

rffc5071_regs.def

Fix overflows in shifts, suppress warnings for temporarily unused variables.

2012-09-04 20:08:30 -04:00

rffc5071.c

Extract knowledge of RF path configurations from the RFFC5071 driver.

2013-09-07 12:59:57 -07:00

rffc5071.h

Extract knowledge of RF path configurations from the RFFC5071 driver.

2013-09-07 12:59:57 -07:00

rom_iap.c

Cleanup on xxx_rom_to_ram directory now it contains only makefile, removed redundant .c file from xxx dir.

2013-04-07 18:55:12 +02:00

rom_iap.h

Add host(hackrf_info)/fw(usb_performance) IAP read part id/serial no(to be confirmed).

2013-03-09 11:47:28 +01:00

sgpio.c

Add skip-every-N function to CPLD, where N is controlled by three input pins from the microcontroller.

2013-11-19 19:52:06 -08:00

sgpio.h

Add skip-every-N function to CPLD, where N is controlled by three input pins from the microcontroller.

2013-11-19 19:52:06 -08:00

si5351c.c

Reduce drive strength from clock generator (Si5351C) to first mixer (RFFC5072). This reduces every-50MHz spurs in RX by 10 to 15dB.

2013-09-22 11:54:37 -07:00

si5351c.h

firmware: fix a warning

2013-06-09 09:15:35 -06:00

streaming.c

Factor out USB API for transceiver control into separate files.

2013-09-20 12:54:56 -07:00

streaming.h

Factor out USB API for transceiver control into separate files.

2013-09-20 12:54:56 -07:00

tuning.c

Remove MAX2837_FREQ_NOMINAL_MHZ #define -- it must be updated now that IF is adjustable. So I pushed the calculation directly into the two places it was used.

2013-09-21 20:27:27 -07:00

tuning.h

Move files that have no application-specific bits (e.g. USB stack, tuning, and RF path APIs) to ../common/.

2013-09-17 15:10:46 -07:00

usb_queue.c

Move files that have no application-specific bits (e.g. USB stack, tuning, and RF path APIs) to ../common/.

2013-09-17 15:10:46 -07:00

usb_queue.h

Broke some application-specific USB code into separate files within hackrf_usb/. Hoping I can use them as necessary in other projects, or push them into a library eventually.

2013-09-19 19:51:32 -07:00

usb_request.c

Move files that have no application-specific bits (e.g. USB stack, tuning, and RF path APIs) to ../common/.

2013-09-17 15:10:46 -07:00

usb_request.h

Move files that have no application-specific bits (e.g. USB stack, tuning, and RF path APIs) to ../common/.

2013-09-17 15:10:46 -07:00

usb_standard_request.c

Remove dependencies on application-specific USB descriptors.

2013-09-17 15:13:12 -07:00

usb_standard_request.h

Move files that have no application-specific bits (e.g. USB stack, tuning, and RF path APIs) to ../common/.

2013-09-17 15:10:46 -07:00

usb_type.h

Remove dependencies on application-specific USB descriptors.

2013-09-17 15:13:12 -07:00

usb.c

Move files that have no application-specific bits (e.g. USB stack, tuning, and RF path APIs) to ../common/.

2013-09-17 15:10:46 -07:00

usb.h

Move files that have no application-specific bits (e.g. USB stack, tuning, and RF path APIs) to ../common/.

2013-09-17 15:10:46 -07:00

w25q80bv.c

Cleanup on xxx_rom_to_ram directory now it contains only makefile, removed redundant .c file from xxx dir.

2013-04-07 18:55:12 +02:00

w25q80bv.h

Cleanup on xxx_rom_to_ram directory now it contains only makefile, removed redundant .c file from xxx dir.

2013-04-07 18:55:12 +02:00

README

This directory contains things shared by multiple HackRF firmware
implementations.