mirror of
https://github.com/semerad/gt3b.git
synced 2026-03-10 03:56:54 +01:00
74 lines
2.6 KiB
Plaintext
74 lines
2.6 KiB
Plaintext
*0.4.2 ()
|
|
added global setting to disable center/reset value beep
|
|
minimum battery voltage set to 2V for those experimenting with 1S cell
|
|
PPM length shortened to "NUM_CHANNELS x 2ms + 5ms" to send new data
|
|
to receiver as soon as possible
|
|
ADC measuring every 1ms, averaging last 4 samples when used
|
|
after poweron, if steering or throttle are not in center dead zone,
|
|
show calibration screen, because recalibration will be probably
|
|
needed
|
|
added poweron beep, can be set ON/OFF in global config
|
|
|
|
*0.4.1 (17 Aug 2011)
|
|
|
|
minimum battery voltage set to 6V
|
|
CH3 key set default to OFF
|
|
added DGR key function to reset DIG mix to centre
|
|
added posibility to select DIG instead of channel number at MultiPosition
|
|
added lap count functions assignable to keys
|
|
|
|
*0.4.0 (18 Jul 2011)
|
|
|
|
use steering trim when dual-ESC steering
|
|
added channel_speed for all channels, throttle channel can be applied only
|
|
for forward side
|
|
repaired setting to default values for functions of config-values mapped
|
|
to trims, this should be done only for non-config values (channel,
|
|
mix)
|
|
|
|
*0.3.2 (27 Jun 2011)
|
|
|
|
added option throttle brake cut of to be able to drive forward only
|
|
vehicles (boats)
|
|
added MultiPosition settable to channel
|
|
|
|
*0.3.1 (26 Jun 2011)
|
|
|
|
DIG mix can be set to channel 1 to have dual-ESC steering (boat, tank, ...)
|
|
|
|
*0.3.0 (24 Jun 2011)
|
|
|
|
added globally settable key long-press delay
|
|
when using trims, longer beep at value reset and short pause ignoring keys
|
|
momentary trims/keys now sets value only when state of buttons changed
|
|
(previously it always forced value to reflect button state), so it is
|
|
possible to map momentary and non-momentary keys to the same
|
|
channel/mix value, also value is showed when changed
|
|
added possibility for momentary trims and 2-state keys to return not
|
|
to centre/left, but to previous value which was active before button
|
|
press
|
|
|
|
*0.2.0 (9 Jun 2011)
|
|
|
|
added 4WS mix
|
|
added DIG mix
|
|
added steering speed (Turn, Return)
|
|
added inactivity alarm
|
|
added function C3R for keys to reset channel3 value to centre
|
|
internal changes of trims momentary/opposite_reset
|
|
|
|
*0.1.0 (2 Jun 2011)
|
|
|
|
added special chars "-1" and "10" to be able to display values -199...1099
|
|
both trims-long now only resets, before there was 1 press of first button
|
|
changed EEPROM init to eliminate broken initialization
|
|
in menu: use ENTER to switch items and END/ENTER-long to end of edit of item
|
|
added key mapping to configuration of model and removed coresponding
|
|
global settings (trim_step, autorepeat, ch3_momentary)
|
|
|
|
|
|
*0.0.0 (25 May 2011)
|
|
|
|
initial public revision
|
|
|