GENERAL

General configuration values

Device
This name will identify this device in your network (this name will be used as DHCP hostname, thus the device will be accessible as http://<hostname>). Notice that this value may contain only the ASCII letters 'a' through 'z' (in a case-insensitive manner), digits '0' through '9', and the hyphen ('-'). The hostname can neither start or end with a hyphen.
For this setting to take effect only on initial connection to the network, make sure to Reconnect if the device is already connected.
Human-friendly name for this device. It will be displayed in the WebUI and reported with the heartbeat.
For example, it can be used to specify the device location or it's purpose.
Delay in milliseconds to detect a double or triple click (from 0 to 1000ms).
The lower this number the faster the device will respond to button clicks but the harder it will be to get the expected event. Increase this number if you are having trouble triggering the event. Set this value to 0 to disable repeat detection, device will respond immediately to a single button click. When using default configuration, consider that this will disable the SoftAP button action.
You will have to reboot the device to apply this setting.
Alexa
Advertise on the network as an Alexa compatible device
Instead of the global hostname setting, use this string to identify the device
Heartbeat
How often the heartbeat messages should be sent (number of seconds).
Select which message types will be sent out with the periodic report.