The following only applies to T-Watch, please [click here to view LilyPi](lilypi_pinmap.md) # 1.Pinout table | Peripherals | 2019/TOUCH | 2019/NO TOUCH | T BLOCK | T-Watch2020 V1 | | :---------------: | :----------: | :-----------: | :----------: | :------------: | | Core | ESP32-DOWDQ6 | ESP32-DOWDQ6 | ESP32-DOWDQ6 | ESP32-DOWDQ6 | | Flash | 16MB | 16MB | 16MB | 16MB | | SPRAM | 8MB | 8MB | 8MB | 8MB | | TOUCH Driver | FT6236 | N/A | N/A | FT6236 | | TFT Driver | ST7789 | ST7789 | N/A | ST7789 | | TFT Size | 240x240/1.54 | 240x240/1.54 | N/A | 240x240/1.54 | | TFT RST | N/A | N/A | N/A | N/A | | TFT MISO | N/A | N/A | N/A | N/A | | TFT MOSI | 19 | 19 | N/A | 19 | | TFT SCLK | 18 | 18 | N/A | 18 | | TFT DC | 27 | 27 | N/A | 27 | | TFT CS | 5 | 5 | N/A | 5 | | TFT BackLight | 12 | 12 | N/A | 12 | | SENSOR SDA[3] | 21 | 21 | 21 | 21 | | SENSOR SCL[3] | 22 | 22 | 22 | 22 | | FT6236 SDA | 23 | N/A | N/A | 23 | | FT6236 SCL | 32 | N/A | N/A | 32 | | MOTOR | N/A[1] | N/A[1] | N/A[1] | 4 | | BMA423 Interrupt | 39 | N/A | N/A | 39 | | FT6236 Interrupt | 38 | 38[2] | N/A | 38 | | PCF8563 Interrupt | 37 | 37 | 37 | 37 | | BUTTON | 36 | 36 | 36 | N/A | | AXP192 Interrupt | 35 | 35 | 35 | 35 | | I2S BCK | N/A[1] | N/A[1] | N/A[1] | 26 | | I2S WS | N/A[1] | N/A[1] | N/A[1] | 25 | | I2S DOUT | N/A[1] | N/A[1] | N/A[1] | 33 | | IR Send | N/A | N/A | N/A | 13 | | SD MISO | N/A | N/A | N/A | N/A | | SD MOSI | N/A | N/A | N/A | N/A | | SD SCLK | N/A | N/A | N/A | N/A | | SD CS | N/A | N/A | N/A | N/A | [1]. According to different base plates [2]. Capacitive touch button [3]. SENSOR SDA and SCL share PCF8563, BMA423, AXP192,T-Block without BMA423, use MPU6050 [4]. T-Watch2020 V1, Audio audio power domain is controlled by AXP202 LDO3 ## 3. AXP202 power management channel | channel | Explanation | | :-----: | :--------------------: | | DC2 | NO USE | | DC3 | ESP32(Can't close) | | LDO1 | Can't control | | LDO2 | Backlight | | LDO3 | Backplane power supply | | LDO4 | S76/78G Backplane only | - In T-Watch 2020, LDO3 is the audio power domain, and the remaining power channels are not applicable ## 2. Bottom plate Pinout(The following does not apply to T-Watch2020) **Standard** | ESP32 Core | GPIO33 | GPIO25 | GPIO21 | GPIO22 | | :--------: | :----: | :-----: | :----: | :----: | | Standard | Motor | Speaker | SDA | SCL | * Onboard SD card slot * The motor/speaker power domain is LDO3 **SIM800L** | ESP32 Core | GPIO14 | GPIO15 | GPIO4 | GPIO33 | GPIO34 | | :--------: | :----: | :----: | :--------: | :----: | :----: | | SIM800L | RST | PWRKEY | BOOST_CTRL | TX | RX | * No onboard SD card slot * The modem power domain is LDO3 **SIM868** | ESP32 Core | GPIO33 | GPIO34 | | :--------: | :----: | :----: | | SIM868 | TX | RX | * Onboard SD card slot * The gps power domain is LDO3 **MPR121** | ESP32 Core | GPIO21 | GPIO22 | | :--------: | :----: | :----: | | MPR121 | SDA | SCL | * Onboard SD card slot * The sensor power domain is LDO3 **S7XG_Lora & GPS** | ESP32 Core | GPIO33 | GPIO34 | | :--------: | :----: | :----: | | S7XG_Lora | TX | RX | * Onboard SD card slot * The S76/78G power domain is LDO3 * The gps power domain is LDO3