diff --git a/examples/BasicUnit/TwatcV3Special/Microphone/Microphone.ino b/examples/BasicUnit/TwatcV3Special/Microphone/Microphone.ino
new file mode 100644
index 0000000..14e3af2
--- /dev/null
+++ b/examples/BasicUnit/TwatcV3Special/Microphone/Microphone.ino
@@ -0,0 +1,126 @@
+/**
+ *  This sample only applies to TWATCH 2020 V3 and only tests PDM microphones
+ */
+#include "config.h"
+#include <driver/i2s.h>
+
+#define BUFFER_SIZE (2*1024)
+
+// TWATCH 2020 V3 PDM microphone pin
+#define MIC_DATA            2
+#define MIC_CLOCK           0
+
+uint8_t buffer[BUFFER_SIZE] = {0};
+
+TTGOClass           *ttgo = nullptr;
+lv_obj_t            *chart = nullptr;
+lv_chart_series_t   *ser1 = nullptr;
+const int           define_max = 200;
+const int           define_avg = 15;
+const int           define_zero = 3000;
+float               val_avg = 0;
+float               val_avg_1 = 0;
+float               all_val_avg = 0;
+
+uint8_t             val1, val2;
+int16_t             val16 = 0;
+int16_t             val_max = 0;
+int16_t             val_max_1 = 0;
+int32_t             all_val_zero1 = 0;
+int32_t             all_val_zero2 = 0;
+int32_t             all_val_zero3 = 0;
+uint32_t            j = 0;
+
+void setup()
+{
+    Serial.begin(115200);
+
+    ttgo = TTGOClass::getWatch();
+
+    ttgo->begin();
+
+    ttgo->openBL();
+
+    ttgo->lvgl_begin();
+
+    lv_obj_t *text = lv_label_create(lv_scr_act(), NULL);
+    lv_label_set_text(text, "PDM Microphone Test");
+    lv_obj_align(text, NULL, LV_ALIGN_IN_TOP_MID, 0, 20);
+
+    chart = lv_chart_create(lv_scr_act(), NULL);
+    lv_obj_set_size(chart, 200, 150);
+    lv_obj_align(chart, NULL, LV_ALIGN_CENTER, 0, 0);
+    lv_chart_set_type(chart,  LV_CHART_TYPE_LINE);   /*Show lines and points too*/
+    lv_chart_set_range(chart, 0, 800);
+
+    ser1 = lv_chart_add_series(chart, LV_COLOR_RED);
+
+    i2s_config_t i2s_config = {
+        .mode = (i2s_mode_t)(I2S_MODE_MASTER | I2S_MODE_RX | I2S_MODE_PDM),
+        .sample_rate =  44100,
+        .bits_per_sample = I2S_BITS_PER_SAMPLE_16BIT,
+        .channel_format = I2S_CHANNEL_FMT_RIGHT_LEFT,
+        .communication_format = (i2s_comm_format_t)(I2S_COMM_FORMAT_I2S | I2S_COMM_FORMAT_I2S_MSB),
+        .intr_alloc_flags = ESP_INTR_FLAG_LEVEL1,
+        .dma_buf_count = 2,
+        .dma_buf_len = 128,
+    };
+
+    i2s_pin_config_t i2s_cfg;
+    i2s_cfg.bck_io_num   = I2S_PIN_NO_CHANGE;
+    i2s_cfg.ws_io_num    = MIC_CLOCK;
+    i2s_cfg.data_out_num = I2S_PIN_NO_CHANGE;
+    i2s_cfg.data_in_num  = MIC_DATA;
+
+    i2s_driver_install(I2S_NUM_0, &i2s_config, 0, NULL);
+    i2s_set_pin(I2S_NUM_0, &i2s_cfg);
+    i2s_set_clk(I2S_NUM_0, 44100, I2S_BITS_PER_SAMPLE_16BIT, I2S_CHANNEL_MONO);
+}
+
+void loop()
+{
+    size_t read_len = 0;
+    j = j + 1;
+    i2s_read(I2S_NUM_0, (char *) buffer, BUFFER_SIZE, &read_len, portMAX_DELAY);
+    for (int i = 0; i < BUFFER_SIZE / 2 ; i++) {
+        val1 = buffer[i * 2];
+        val2 = buffer[i * 2 + 1] ;
+        val16 = val1 + val2 *  256;
+        if (val16 > 0) {
+            val_avg = val_avg + val16;
+            val_max = max( val_max, val16);
+        }
+        if (val16 < 0) {
+            val_avg_1 = val_avg_1 + val16;
+            val_max_1 = min( val_max_1, val16);
+        }
+        all_val_avg = all_val_avg + val16;
+        if (abs(val16) >= 20)
+            all_val_zero1 = all_val_zero1 + 1;
+        if (abs(val16) >= 15)
+            all_val_zero2 = all_val_zero2 + 1;
+        if (abs(val16) > 5)
+            all_val_zero3 = all_val_zero3 + 1;
+    }
+
+    if (j % 2 == 0 && j > 0) {
+        val_avg = val_avg / BUFFER_SIZE ;
+        val_avg_1 = val_avg_1 / BUFFER_SIZE;
+        all_val_avg = all_val_avg / BUFFER_SIZE ;
+
+        lv_chart_set_next(chart, ser1, val_avg);
+
+        val_avg = 0;
+        val_max = 0;
+
+        val_avg_1 = 0;
+        val_max_1 = 0;
+
+        all_val_avg = 0;
+        all_val_zero1 = 0;
+        all_val_zero2 = 0;
+        all_val_zero3 = 0;
+    }
+    lv_task_handler();
+    delay(5);
+}
diff --git a/examples/BasicUnit/TwatcV3Special/Microphone/config.h b/examples/BasicUnit/TwatcV3Special/Microphone/config.h
new file mode 100644
index 0000000..ff6b112
--- /dev/null
+++ b/examples/BasicUnit/TwatcV3Special/Microphone/config.h
@@ -0,0 +1,21 @@
+// => Hardware select
+#define LILYGO_WATCH_2020_V3             //To use T-Watch2020 V3, please uncomment this line
+
+
+//NOT SUPPORT ...
+//#define LILYGO_WATCH_2020_V1
+// #define LILYGO_WATCH_2020_V2
+// #define LILYGO_WATCH_2019_WITH_TOUCH
+// #define LILYGO_WATCH_2019_NO_TOUCH
+// #define LILYGO_WATCH_BLOCK
+//NOT SUPPORT ...
+
+// => Function select
+#define LILYGO_WATCH_LVGL                   //To use LVGL, you need to enable the macro LVGL
+
+
+#include <LilyGoWatch.h>
+
+
+
+