Added static ipaddress example

examples/BasicUnit/StaticIPAddress/StaticIPAddress.ino

@@ -0,0 +1,79 @@
+/**
+ * @file      StaticIPAddress.ino
+ * @author    Lewis He (lewishe@outlook.com)
+ * @license   MIT
+ * @copyright Copyright (c) 2023  Shenzhen Xin Yuan Electronic Technology Co., Ltd
+ * @date      2023-02-17
+ *
+ */
+
+#include "config.h"
+#include <WiFi.h>
+#include <WiFiClientSecure.h>
+#include <SPIFFS.h>
+#include <FS.h>
+#include <HTTPClient.h>
+
+TTGOClass *ttgo = nullptr;
+
+const char *ssid = "yourNetworkName";
+const char *password =  "yourNetworkPass";
+
+//IPAddress
+IPAddress staticIP(192, 168, 0, 113);
+IPAddress gateway(192, 168, 0, 1);
+IPAddress subnet(255, 255, 255, 0);
+IPAddress dns(192, 168, 0, 1);
+
+void setup()
+{
+    Serial.begin(115200);
+
+    // Get Watch Instance
+    ttgo = TTGOClass::getWatch();
+
+    // Initialize watch
+    ttgo->begin();
+
+    // Register lvgl
+    ttgo->lvgl_begin();
+
+    // Turn on the backlight
+    ttgo->openBL();
+
+    // Register wifi events
+    WiFi.mode(WIFI_STA);
+
+    WiFi.begin(ssid, password);
+
+    if (WiFi.config(staticIP, gateway, subnet, dns, dns) == false) {
+        Serial.println("Configuration failed.");
+    }
+
+    while (WiFi.status() != WL_CONNECTED) {
+        Serial.print("."); delay(50);
+    }
+
+    Serial.println();
+    Serial.println("WiFi connected");
+    Serial.println("IP address: ");
+    Serial.println(WiFi.localIP());
+
+    Serial.print("Local IP: ");
+    Serial.println(WiFi.localIP());
+    Serial.print("Subnet Mask: ");
+    Serial.println(WiFi.subnetMask());
+    Serial.print("Gateway IP: ");
+    Serial.println(WiFi.gatewayIP());
+    Serial.print("DNS 1: ");
+    Serial.println(WiFi.dnsIP(0));
+    Serial.print("DNS 2: ");
+    Serial.println(WiFi.dnsIP(1));
+
+}
+
+
+void loop()
+{
+
+}

examples/BasicUnit/StaticIPAddress/config.h

@@ -0,0 +1,29 @@
+// => Hardware select
+// #define LILYGO_WATCH_2019_WITH_TOUCH         // To use T-Watch2019 with touchscreen, please uncomment this line
+// #define LILYGO_WATCH_2019_NO_TOUCH           // To use T-Watch2019 Not touchscreen , please uncomment this line
+#define LILYGO_WATCH_2020_V1                 // To use T-Watch2020 V1, please uncomment this line
+// #define LILYGO_WATCH_2020_V2                 // To use T-Watch2020 V2, please uncomment this line
+// #define LILYGO_WATCH_2020_V3                 // To use T-Watch2020 V3, please uncomment this line
+
+// #define LILYGO_LILYPI_V1                     //LILYPI / TBLOCK requires an external display module
+// #define LILYGO_WATCH_BLOCK                   //LILYPI / TBLOCK requires an external display module
+
+
+
+#if defined(LILYGO_LILYPI_V1) || defined(LILYGO_WATCH_BLOCK)
+// #define LILYGO_BLOCK_ST7796S_MODULE          //Use ST7796S
+// #define LILYGO_BLOCK_ILI9481_MODULE          //Use ILI9841
+// #define LILYGO_GC9A01A_MODULE                   //Use GC9A01A
+#endif
+#define LILYGO_WATCH_LVGL                   //To use LVGL, you need to enable the macro LVGL
+#define LILYGO_WATCH_LVGL_FS
+#define LILYGO_WATCH_LVGL_DECODER       //Need to use PNG decoding, to define this macro
+
+
+#if defined(LILYGO_WATCH_2019_WITH_TOUCH)
+#define LILYGO_WATCH_LVGL_FS_SPIFFS
+#endif
+// #define LILYGO_WATCH_HAS_SDCARD
+
+#include <LilyGoWatch.h>
+