; PlatformIO Project Configuration File ; ; Build options: build flags, source filter ; Upload options: custom upload port, speed and extra flags ; Library options: dependencies, extra library storages ; Advanced options: extra scripting ; ; Please visit documentation for the other options and examples ; https://docs.platformio.org/page/projectconf.html [platformio] src_dir = main include_dir = main extra_configs = environments.ini tests/*_env.ini *_env.ini ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; ENVIRONMENT CHOICE ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;Uncomment the env line corresponding to your board and modules required, ; ;you can also adapt the modules by removing the corresponding lines in the env detail ; ; if you go to the build flag section of your env you will see that some User_config.h ; ; parameters can be overwritten here, for example the gateway name. ; ; If you want to avoid the lost of your environments at each update you can put them ; ; into a separate file called prod_env.ini, it will be automatically read by pio ; ; an example (prod_env.ini.example) is available into the same folder as this file. ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;default_envs = rfbridge ;default_envs = rfbridge-direct ;default_envs = esp32dev-all-test ;default_envs = esp32dev-rf ;default_envs = esp32dev-pilight ;default_envs = esp32dev-pilight-cc1101 ;default_envs = esp32dev-somfy-cc1101 ;default_envs = esp32dev-pilight-somfy-cc1101 ;default_envs = esp32dev-weatherstation ;default_envs = esp32dev-gf-sun-inverter ;default_envs = esp32dev-ir ;default_envs = esp32dev-ble ;default_envs = esp32dev-ble-mqtt-undecoded ;default_envs = esp32dev-ble-aws ;default_envs = esp32feather-ble ;default_envs = esp32-lolin32lite-ble ;default_envs = esp32-olimex-gtw-ble-eth ;default_envs = esp32-olimex-gtw-ble-poe ;default_envs = esp32-olimex-gtw-ble-poe-iso ;default_envs = esp32-wt32-eth01-ble-eth ;default_envs = esp32-olimex-gtw-ble-wifi ;default_envs = esp32-m5stick-ble ;default_envs = esp32-m5stack-ble ;default_envs = esp32-m5tough-ble ;default_envs = esp32-m5stick-c-ble ;default_envs = esp32-m5stick-cp-ble ;default_envs = esp32-m5atom-matrix ;default_envs = esp32-m5atom-lite ;default_envs = esp32s3-atomS3U ;default_envs = esp32doitv1-aithinker-r01-sx1278 ;default_envs = esp32dev-rtl_433 ;default_envs = heltec-rtl_433 ;default_envs = heltec-rtl_433-fsk ;default_envs = heltec-ble ;default_envs = lilygo-rtl_433 ;default_envs = lilygo-rtl_433-fsk ;default_envs = lilygo-ble ;default_envs = esp32dev-multi_receiver ;default_envs = esp32dev-multi_receiver-pilight ;default_envs = tinypico-ble ;default_envs = ttgo-lora32-v1 ;default_envs = ttgo-lora32-v21 ;default_envs = ttgo-t-beam ;default_envs = heltec-wifi-lora-32 ;default_envs = shelly-plus1 ;default_envs = nodemcuv2-all-test ;default_envs = nodemcuv2-fastled-test ;default_envs = nodemcuv2-2g ;default_envs = nodemcuv2-ir ;default_envs = nodemcuv2-serial ;default_envs = avatto-bakeey-ir ;default_envs = nodemcuv2-rf ;default_envs = nodemcuv2-rf-cc1101 ;default_envs = nodemcuv2-somfy-cc1101 ;default_envs = manual-wifi-test ;default_envs = rf-wifi-gateway ;default_envs = nodemcuv2-rf2 ;default_envs = nodemcuv2-rf2-cc1101 ;default_envs = nodemcuv2-pilight ;default_envs = nodemcuv2-weatherstation ;default_envs = sonoff-basic ;default_envs = sonoff-basic-rfr3 ;default_envs = atmega-all-test ;default_envs = uno-rf ;default_envs = uno-fastled ;default_envs = esp32dev-ble-datatest ;default_envs = esp32s3-dev-c1-ble ;default_envs = esp32c3-dev-m1-ble ;default_envs = airm2m_core_esp32c3 ;default_envs = esp32c3-dev-c2-ble ;default_envs = lolin_c3_mini ;default_envs = thingpulse-espgateway ;default_envs = theengs-bridge ;default_envs = esp32dev-ble-idf ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; ENVIRONMENTS PARAMETERS ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;Libraries and parameters shared accross environements ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; [libraries] arduinojson = ArduinoJson@6.18.3 arduinolog = https://github.com/1technophile/Arduino-Log.git#f634509 picomqtt = PicoMQTT@1.1.1 rc-switch = https://github.com/1technophile/rc-switch.git#98537e9 newremoteswitch = https://github.com/1technophile/NewRemoteSwitch.git#8eb980e ble = https://github.com/h2zero/NimBLE-Arduino.git#1.4.1 irremoteesp = IRremoteESP8266@2.8.5 lora = https://github.com/sandeepmistry/arduino-LoRa.git#f4a1d27 esppilight = ESPiLight@0.17.0 rfWeatherStation = WeatherStationDataRx@0.3.1 rfm69 = https://github.com/LowPowerLab/RFM69.git#2e915ea rfm69spi = https://github.com/lowpowerlab/spiflash.git#9c0c2b9 rfm69_low-power = Low-Power@1.6 dht = DHT sensor library@1.3.2 unifiedsensor = Adafruit Unified Sensor@1.1.4 tsl2561 = Adafruit TSL2561@1.0.3 bme280 = SparkFun BME280@2.0.4 bmp180 = BMP180#efac46bd8d htu21 = SparkFun HTU21D Humidity and Temperature Sensor Breakout@1.1.3 ahtx0 = Adafruit AHTX0 ina226 = https://github.com/jarzebski/Arduino-INA226.git#968a684 a6lib = https://github.com/h2zero/A6lib wifimanager32 = https://github.com/tzapu/WiFiManager.git#9f5981e wifimanager8266 = https://github.com/tzapu/WiFiManager.git#2.0.5-beta ethernet = Ethernet esp8266_mdns = esp8266_mdns wire = Wire fastled = fastled/FastLED@3.5.0 adafruit_neopixel = adafruit/Adafruit NeoPixel@^1.11.0 onewire = paulstoffregen/OneWire@2.3.7 dallastemperature = DallasTemperature m5stickc = M5StickC@0.2.0 m5stickcp = https://github.com/m5stack/M5StickC-Plus.git#0.0.2 m5stack = M5Stack@0.3.1 m5tough = https://github.com/m5stack/M5Tough.git#b502416 smartrc-cc1101-driver-lib = SmartRC-CC1101-Driver-Lib@2.5.7 stl = https://github.com/mike-matera/ArduinoSTL.git#7411816 shtc3 = https://github.com/sparkfun/SparkFun_SHTC3_Arduino_Library somfy_remote=Somfy_Remote_Lib@0.3.0 rtl_433_ESP = https://github.com/NorthernMan54/rtl_433_ESP.git#v0.3.2 emodbus = miq19/eModbus@1.0.0 gfSunInverter = https://github.com/BlackSmith/GFSunInverter.git#v1.0.1 decoder = https://github.com/theengs/decoder.git#development ssd1306 = https://github.com/ThingPulse/esp8266-oled-ssd1306.git#f96fd6a lm75 = jeremycole/I2C Temperature Sensors derived from the LM75@^1.0.3 rn8209 = https://github.com/theengs/RN8209C-SDK.git#arduino [env] framework = arduino lib_deps = ${libraries.picomqtt} ${libraries.arduinojson} ${libraries.arduinolog} build_flags = '-DWM_DEBUG_LEVEL=1' ;WiFi Manager log level, valid values are: DEBUG_ERROR = 0, DEBUG_NOTIFY = 1, DEBUG_VERBOSE = 2, DEBUG_DEV = 3, DEBUG_MAX = 4 -w ; supress all warnings ; -E ; generate precompiled source file (.pio/build/*/src/main.ino.cpp.o), use for precompilator debuging only (prevent compilation to succeed) ; '-DLOG_LEVEL=LOG_LEVEL_TRACE' ; Enable trace level logging monitor_speed = 115200 [com] esp8266_platform = espressif8266@4.1.0 esp32_platform = espressif32@6.1.0 esp32_solo_platform = https://github.com/tasmota/platform-espressif32/releases/download/2023.02.00/platform-espressif32.zip atmelavr_platform = atmelavr@3.3.0 [com-esp] ; Used by all ESP8266/ESP8285 based builds lib_deps = ${env.lib_deps} build_flags = ${env.build_flags} '-DENV_NAME="$PIOENV"' '-DZmqttDiscovery="HADiscovery"' '-DMQTTsetMQTT' '-DMQTT_HTTPS_FW_UPDATE' ;'-DCORE_DEBUG_LEVEL=4' [com-esp32] ; Used by all ESP32 based builds extra_scripts = pre:scripts/replace_lib.py lib_deps = ${env.lib_deps} ${libraries.wifimanager32} build_flags = ${env.build_flags} '-DENV_NAME="$PIOENV"' '-DZmqttDiscovery="HADiscovery"' '-DCONFIG_BT_NIMBLE_ROLE_PERIPHERAL_DISABLED' '-DCONFIG_BT_NIMBLE_ROLE_BROADCASTER_DISABLED' '-DMQTTsetMQTT' '-DMQTT_HTTPS_FW_UPDATE' ;'-DCORE_DEBUG_LEVEL=4' '-DZwebUI="WebUI"' ; enable WebUI as a default for all ESP32 builds ( the module only enables for ESP32 based builds ) '-DARDUINO_LOOP_STACK_SIZE=9600' ; The firmware upgrade options needs a large amount of free stack, ~9600 [com-arduino] lib_deps = ${env.lib_deps} ${libraries.ethernet} build_flags = ${env.build_flags} '-DZmqttDiscovery="HADiscovery"' [com-arduino-low-memory] lib_deps = ${env.lib_deps} ${libraries.ethernet} build_flags = ${env.build_flags} '-DsimpleReceiving=false'