menu.clksrc=CPU Clock Frequency
menu.burn_tool_firmware=Burn Tool Firmware
menu.burn_baudrate=Burn Baud Rate
menu.toolsloc=Tool Install Location

##################################################
############# Sipeed Maix Amigo ###############

amigo.name=Sipeed Maix Amigo

## Toolchain
amigo.menu.toolsloc.default=Default
amigo.menu.toolsloc.default.compiler.path={runtime.tools.riscv64-unknown-elf-gcc.path}/bin/

## CPU Clock
amigo.menu.clksrc.400=400MHz CPU Clock Frequency
amigo.menu.clksrc.500=500MHz CPU Clock Frequency
amigo.menu.clksrc.600=600MHz CPU Clock Frequency
amigo.menu.clksrc.400.build.f_cpu=400000000L
amigo.menu.clksrc.500.build.f_cpu=500000000L
amigo.menu.clksrc.600.build.f_cpu=600000000L

## Burn baud rate
amigo.menu.burn_baudrate.2000000=2 Mbps
amigo.menu.burn_baudrate.4500000=4.5 Mbps (Must open-ec!)
amigo.menu.burn_baudrate.1500000=1.5 Mbps
amigo.menu.burn_baudrate.1000000=1 Mbps
amigo.menu.burn_baudrate.2000000.build.burn_baudrate=2000000
amigo.menu.burn_baudrate.4500000.build.burn_baudrate=4500000
amigo.menu.burn_baudrate.1500000.build.burn_baudrate=1500000
amigo.menu.burn_baudrate.1000000.build.burn_baudrate=1000000

## Burn tool firmware
amigo.menu.burn_tool_firmware.amigo=open-ec
amigo.menu.burn_tool_firmware.amigo.build.burn_tool_firmware=goE

## Core settings
amigo.build.variant=sipeed_maix_amigo
amigo.build.core=arduino

## This sets a define for use in the compiled code.
amigo.build.board=MAIX_AMIGO

## This selects the tool from "programmers.txt"
amigo.program.tool=kflash
amigo.upload.tool=kflash

## Limit is the 16MB Flash. Assume half is used for something else.
amigo.upload.maximum_size=8388608
amigo.build.ldscript="{runtime.platform.path}/cores/arduino/kendryte-standalone-sdk/lds/kendryte.ld"

##################################################
############# Sipeed Maix Cube ###############

cube.name=Sipeed Maix Cube

## Toolchain
cube.menu.toolsloc.default=Default
cube.menu.toolsloc.default.compiler.path={runtime.tools.riscv64-unknown-elf-gcc.path}/bin/

## CPU Clock
cube.menu.clksrc.400=400MHz CPU Clock Frequency
cube.menu.clksrc.500=500MHz CPU Clock Frequency
cube.menu.clksrc.600=600MHz CPU Clock Frequency
cube.menu.clksrc.400.build.f_cpu=400000000L
cube.menu.clksrc.500.build.f_cpu=500000000L
cube.menu.clksrc.600.build.f_cpu=600000000L

## Burn baud rate
cube.menu.burn_baudrate.1500000=1.5 Mbps
cube.menu.burn_baudrate.1000000=1 Mbps
cube.menu.burn_baudrate.1500000.build.burn_baudrate=1500000
cube.menu.burn_baudrate.1000000.build.burn_baudrate=1000000

## Burn tool firmware
cube.menu.burn_tool_firmware.cube=open-ec
cube.menu.burn_tool_firmware.cube.build.burn_tool_firmware=goE

## Point to the file for ./variants/<variant>/pins_arduino.h
cube.build.variant=sipeed_maix_cube

## "The 'core' file directory for this board, in ./cores
cube.build.core=arduino

## This sets a define for use in the compiled code.
cube.build.board=MAIX_CUBE
cube.build.sdata.size=512

## This selects the tool from "programmers.txt"
cube.upload.tool=kflash

## Limit is the 16MB Flash. Assume half is used for something else.
cube.upload.maximum_size=8388608
cube.build.ldscript="{runtime.platform.path}/cores/arduino/kendryte-standalone-sdk/lds/kendryte.ld"

####################################################
############### Sipeed Maix Go Board ###############

go.name=Sipeed Maix Go

## Toolchain
go.menu.toolsloc.default=Default
go.menu.toolsloc.default.compiler.path={runtime.tools.riscv64-unknown-elf-gcc.path}/bin/

## CPU Clock
go.menu.clksrc.400=400MHz CPU Clock Frequency
go.menu.clksrc.500=500MHz CPU Clock Frequency
go.menu.clksrc.600=600MHz CPU Clock Frequency
go.menu.clksrc.400.build.f_cpu=400000000L
go.menu.clksrc.500.build.f_cpu=500000000L
go.menu.clksrc.600.build.f_cpu=600000000L

## Burn baud rate
go.menu.burn_baudrate.2000000=2 Mbps
go.menu.burn_baudrate.4500000=4.5 Mbps (Must open-ec!)
go.menu.burn_baudrate.1500000=1.5 Mbps
go.menu.burn_baudrate.1000000=1 Mbps
go.menu.burn_baudrate.2000000.build.burn_baudrate=2000000
go.menu.burn_baudrate.4500000.build.burn_baudrate=4500000
go.menu.burn_baudrate.1500000.build.burn_baudrate=1500000
go.menu.burn_baudrate.1000000.build.burn_baudrate=1000000

## Burn tool firmware
go.menu.burn_tool_firmware.goE=open-ec
go.menu.burn_tool_firmware.goD=CMSIS-DAP
go.menu.burn_tool_firmware.goE.build.burn_tool_firmware=goE
go.menu.burn_tool_firmware.goD.build.burn_tool_firmware=goD

## Core settings
## Point to the file for ./variants/<variant>/pins_arduino.h
go.build.variant=sipeed_maix_go

## "The 'core' file directory for this board, in ./cores
go.build.core=arduino

## This sets a define for use in the compiled code.
go.build.board=MAIX_GO

## This selects the tool from "programmers.txt"
go.program.tool=kflash
go.upload.tool=kflash

## Limit is the 16MB Flash. Assume half is used for something else.
go.upload.maximum_size=8388608
go.build.ldscript="{runtime.platform.path}/cores/arduino/kendryte-standalone-sdk/lds/kendryte.ld"

##################################################
############# Sipeed Maixduino Board ###############

mduino.name=Sipeed Maixduino

## Toolchain
mduino.menu.toolsloc.default=Default
mduino.menu.toolsloc.default.compiler.path={runtime.tools.riscv64-unknown-elf-gcc.path}/bin/

## CPU Clock
mduino.menu.clksrc.400=400MHz CPU Clock Frequency
mduino.menu.clksrc.500=500MHz CPU Clock Frequency
mduino.menu.clksrc.600=600MHz CPU Clock Frequency
mduino.menu.clksrc.400.build.f_cpu=400000000L
mduino.menu.clksrc.500.build.f_cpu=500000000L
mduino.menu.clksrc.600.build.f_cpu=600000000L

## Burn baud rate
mduino.menu.burn_baudrate.1500000=1.5 Mbps
mduino.menu.burn_baudrate.1000000=1 Mbps
mduino.menu.burn_baudrate.1500000.build.burn_baudrate=1500000
mduino.menu.burn_baudrate.1000000.build.burn_baudrate=1000000

## Burn tool firmware
mduino.menu.burn_tool_firmware.mduino=Default
mduino.menu.burn_tool_firmware.mduino.build.burn_tool_firmware=maixduino

## Point to the file for ./variants/<variant>/pins_arduino.h
mduino.build.variant=sipeed_maixduino

## "The 'core' file directory for this board, in ./cores
mduino.build.core=arduino

## This sets a define for use in the compiled code.
mduino.build.board=MAIX_DUINO
mduino.build.sdata.size=512

## This selects the tool from "programmers.txt"
mduino.program.tool=kflash
mduino.upload.tool=kflash

## Limit is the 16MB Flash. Assume half is used for something else.
mduino.upload.maximum_size=8388608
mduino.build.ldscript="{runtime.platform.path}/cores/arduino/kendryte-standalone-sdk/lds/kendryte.ld"

##################################################
############# Sipeed M1W Dock Board ###############

m1w.name=Sipeed Maix Dock M1W

## Toolchain
m1w.menu.toolsloc.default=Default
m1w.menu.toolsloc.default.compiler.path={runtime.tools.riscv64-unknown-elf-gcc.path}/bin/

## CPU Clock
m1w.menu.clksrc.400=400MHz CPU Clock Frequency
m1w.menu.clksrc.500=500MHz CPU Clock Frequency
m1w.menu.clksrc.600=600MHz CPU Clock Frequency
m1w.menu.clksrc.400.build.f_cpu=400000000L
m1w.menu.clksrc.500.build.f_cpu=500000000L
m1w.menu.clksrc.600.build.f_cpu=600000000L

## Burn baud rate
m1w.menu.burn_baudrate.2000000=2 Mbps
m1w.menu.burn_baudrate.1500000=1.5 Mbps
m1w.menu.burn_baudrate.1000000=1 Mbps
m1w.menu.burn_baudrate.2000000.build.burn_baudrate=2000000
m1w.menu.burn_baudrate.1500000.build.burn_baudrate=1500000
m1w.menu.burn_baudrate.1000000.build.burn_baudrate=1000000

## Burn tool firmware
m1w.menu.burn_tool_firmware.dan=Default
m1w.menu.burn_tool_firmware.dan.build.burn_tool_firmware=dan

## Point to the file for ./variants/<variant>/pins_arduino.h
m1w.build.variant=sipeed_maix_one_w_dock

## "The 'core' file directory for this board, in ./cores
m1w.build.core=arduino

## This sets a define for use in the compiled code.
m1w.build.board=MAIX_DOCK_M1W
m1w.build.sdata.size=512

## This selects the tool from "programmers.txt"
m1w.program.tool=kflash
m1w.upload.tool=kflash

## Limit is the 16MB Flash. Assume half is used for something else.
m1w.upload.maximum_size=8388608
m1w.build.ldscript="{runtime.platform.path}/cores/arduino/kendryte-standalone-sdk/lds/kendryte.ld"

##################################################
############# Sipeed M1 Dock Board ###############

m1.name=Sipeed Maix Dock M1

## Toolchain
m1.menu.toolsloc.default=Default
m1.menu.toolsloc.default.compiler.path={runtime.tools.riscv64-unknown-elf-gcc.path}/bin/

## CPU Clock
m1.menu.clksrc.400=400MHz CPU Clock Frequency
m1.menu.clksrc.500=500MHz CPU Clock Frequency
m1.menu.clksrc.600=600MHz CPU Clock Frequency
m1.menu.clksrc.400.build.f_cpu=400000000L
m1.menu.clksrc.500.build.f_cpu=500000000L
m1.menu.clksrc.600.build.f_cpu=600000000L

## Burn baud rate
m1.menu.burn_baudrate.2000000=2 Mbps
m1.menu.burn_baudrate.1500000=1.5 Mbps
m1.menu.burn_baudrate.1000000=1 Mbps
m1.menu.burn_baudrate.2000000.build.burn_baudrate=2000000
m1.menu.burn_baudrate.1500000.build.burn_baudrate=1500000
m1.menu.burn_baudrate.1000000.build.burn_baudrate=1000000

## Burn tool firmware
m1.menu.burn_tool_firmware.dan=Default
m1.menu.burn_tool_firmware.dan.build.burn_tool_firmware=dan

## Point to the file for ./variants/<variant>/pins_arduino.h
m1.build.variant=sipeed_maix_one_dock

## "The 'core' file directory for this board, in ./cores
m1.build.core=arduino

## This sets a define for use in the compiled code.
m1.build.board=MAIX_DOCK_M1
m1.build.sdata.size=512

## This selects the tool from "programmers.txt"
m1.program.tool=kflash
m1.upload.tool=kflash

## Limit is the 16MB Flash. Assume half is used for something else.
m1.upload.maximum_size=8388608
m1.build.ldscript="{runtime.platform.path}/cores/arduino/kendryte-standalone-sdk/lds/kendryte.ld"

##################################################
############# Sipeed Maix Bit Board ###############

bit.name=Sipeed Maix Bit

## Toolchain
bit.menu.toolsloc.default=Default
bit.menu.toolsloc.default.compiler.path={runtime.tools.riscv64-unknown-elf-gcc.path}/bin/

## CPU Clock
bit.menu.clksrc.400=400MHz CPU Clock Frequency
bit.menu.clksrc.500=500MHz CPU Clock Frequency
bit.menu.clksrc.600=600MHz CPU Clock Frequency
bit.menu.clksrc.400.build.f_cpu=400000000L
bit.menu.clksrc.500.build.f_cpu=500000000L
bit.menu.clksrc.600.build.f_cpu=600000000L

## Burn baud rate
bit.menu.burn_baudrate.2000000=2 Mbps
bit.menu.burn_baudrate.1500000=1.5 Mbps
bit.menu.burn_baudrate.1000000=1 Mbps
bit.menu.burn_baudrate.2000000.build.burn_baudrate=2000000
bit.menu.burn_baudrate.1500000.build.burn_baudrate=1500000
bit.menu.burn_baudrate.1000000.build.burn_baudrate=1000000

## Burn tool firmware
bit.menu.burn_tool_firmware.dan=Default
bit.menu.burn_tool_firmware.dan.build.burn_tool_firmware=dan

## Point to the file for ./variants/<variant>/pins_arduino.h
bit.build.variant=sipeed_maix_bit

## "The 'core' file directory for this board, in ./cores
bit.build.core=arduino

## This sets a define for use in the compiled code.
bit.build.board=MAIX_BIT
bit.build.sdata.size=512

## This selects the tool from "programmers.txt"
bit.program.tool=kflash
bit.upload.tool=kflash

## Limit is the 16MB Flash. Assume half is used for something else.
bit.upload.maximum_size=8388608
bit.build.ldscript="{runtime.platform.path}/cores/arduino/kendryte-standalone-sdk/lds/kendryte.ld"


##################################################
############# Sipeed Maix Bit with Mic Board ###############

bitm.name=Sipeed Maix Bit-Mic

## Toolchain
bitm.menu.toolsloc.default=Default
bitm.menu.toolsloc.default.compiler.path={runtime.tools.riscv64-unknown-elf-gcc.path}/bin/

## CPU Clock
bitm.menu.clksrc.400=400MHz CPU Clock Frequency
bitm.menu.clksrc.500=500MHz CPU Clock Frequency
bitm.menu.clksrc.600=600MHz CPU Clock Frequency
bitm.menu.clksrc.400.build.f_cpu=400000000L
bitm.menu.clksrc.500.build.f_cpu=500000000L
bitm.menu.clksrc.600.build.f_cpu=600000000L

## Burn baud rate
bitm.menu.burn_baudrate.1500000=1.5 Mbps
bitm.menu.burn_baudrate.1000000=1 Mbps
bitm.menu.burn_baudrate.1500000.build.burn_baudrate=1500000
bitm.menu.burn_baudrate.1000000.build.burn_baudrate=1000000

## Burn tool firmware
bitm.menu.burn_tool_firmware.bitm=Default
bitm.menu.burn_tool_firmware.bitm.build.burn_tool_firmware=bit-mic

## Point to the file for ./variants/<variant>/pins_arduino.h
bitm.build.variant=sipeed_maix_bit_mic

## "The 'core' file directory for this board, in ./cores
bitm.build.core=arduino

## This sets a define for use in the compiled code.
bitm.build.board=MAIX_BIT_M
bitm.build.sdata.size=512

## This selects the tool from "programmers.txt"
bitm.upload.tool=kflash

## Limit is the 16MB Flash. Assume half is used for something else.
bitm.upload.maximum_size=8388608
bitm.build.ldscript="{runtime.platform.path}/cores/arduino/kendryte-standalone-sdk/lds/kendryte.ld"

##################################################
############# M5Stack M5StickV Stick ###############

stickv.name=M5Stack M5StickV Stick

## Toolchain
stickv.menu.toolsloc.default=Default
stickv.menu.toolsloc.default.compiler.path={runtime.tools.riscv64-unknown-elf-gcc.path}/bin/

## CPU Clock
stickv.menu.clksrc.400=400MHz CPU Clock Frequency
stickv.menu.clksrc.500=500MHz CPU Clock Frequency
stickv.menu.clksrc.600=600MHz CPU Clock Frequency
stickv.menu.clksrc.400.build.f_cpu=400000000L
stickv.menu.clksrc.500.build.f_cpu=500000000L
stickv.menu.clksrc.600.build.f_cpu=600000000L

## Burn baud rate
stickv.menu.burn_baudrate.1500000=1.5 Mbps
stickv.menu.burn_baudrate.1000000=1 Mbps
stickv.menu.burn_baudrate.1500000.build.burn_baudrate=1500000
stickv.menu.burn_baudrate.1000000.build.burn_baudrate=1000000

## Burn tool firmware
stickv.menu.burn_tool_firmware.stick1=CH340
stickv.menu.burn_tool_firmware.stick1.build.burn_tool_firmware=bit-mic


## Point to the file for ./variants/<variant>/pins_arduino.h
stickv.build.variant=m5stack_m5stick_v

## "The 'core' file directory for this board, in ./cores
stickv.build.core=arduino

## This sets a define for use in the compiled code.
stickv.build.board=M5STICK_V
stickv.build.sdata.size=512

## This selects the tool from "programmers.txt"
stickv.program.tool=kflash
stickv.upload.tool=kflash

## Limit is the 16MB Flash. Assume half is used for something else.
stickv.upload.maximum_size=8388608
stickv.build.ldscript="{runtime.platform.path}/cores/arduino/kendryte-standalone-sdk/lds/kendryte.ld"

##################################################
############# M5Stack M5UnitV Camera ###############

unitv.name=M5Stack M5UnitV Camera

## Toolchain
unitv.menu.toolsloc.default=Default
unitv.menu.toolsloc.default.compiler.path={runtime.tools.riscv64-unknown-elf-gcc.path}/bin/

## CPU Clock
unitv.menu.clksrc.400=400MHz CPU Clock Frequency
unitv.menu.clksrc.500=500MHz CPU Clock Frequency
unitv.menu.clksrc.600=600MHz CPU Clock Frequency
unitv.menu.clksrc.400.build.f_cpu=400000000L
unitv.menu.clksrc.500.build.f_cpu=500000000L
unitv.menu.clksrc.600.build.f_cpu=600000000L

## Burn baud rate
unitv.menu.burn_baudrate.1500000=1.5 Mbps
unitv.menu.burn_baudrate.1000000=1 Mbps
unitv.menu.burn_baudrate.1500000.build.burn_baudrate=1500000
unitv.menu.burn_baudrate.1000000.build.burn_baudrate=1000000

## Burn tool firmware
unitv.menu.burn_tool_firmware.unit1=CH340
unitv.menu.burn_tool_firmware.unit1.build.burn_tool_firmware=bit-mic

## Point to the file for ./variants/<variant>/pins_arduino.h
unitv.build.variant=m5stack_m5unit_v

## "The 'core' file directory for this board, in ./cores
unitv.build.core=arduino

## This sets a define for use in the compiled code.
unitv.build.board=M5UNIT_V
unitv.build.sdata.size=512

## This selects the tool from "programmers.txt"
unitv.program.tool=kflash
unitv.upload.tool=kflash

## Limit is the 16MB Flash. Assume half is used for something else.
unitv.upload.maximum_size=8388608
unitv.build.ldscript="{runtime.platform.path}/cores/arduino/kendryte-standalone-sdk/lds/kendryte.ld"

##################################################
############# LamLoei AIoT DaaN Board ###############

aiotdaan.name=LamLoei AIoT DaaN

## Toolchain
aiotdaan.menu.toolsloc.default=Default
aiotdaan.menu.toolsloc.default.compiler.path={runtime.tools.riscv64-unknown-elf-gcc.path}/bin/

## CPU Clock
aiotdaan.menu.clksrc.400=400MHz CPU Clock Frequency
aiotdaan.menu.clksrc.500=500MHz CPU Clock Frequency
aiotdaan.menu.clksrc.600=600MHz CPU Clock Frequency
aiotdaan.menu.clksrc.400.build.f_cpu=400000000L
aiotdaan.menu.clksrc.500.build.f_cpu=500000000L
aiotdaan.menu.clksrc.600.build.f_cpu=600000000L

## Burn baud rate
aiotdaan.menu.burn_baudrate.2000000=2 Mbps
aiotdaan.menu.burn_baudrate.1500000=1.5 Mbps
aiotdaan.menu.burn_baudrate.1000000=1 Mbps
aiotdaan.menu.burn_baudrate.2000000.build.burn_baudrate=2000000
aiotdaan.menu.burn_baudrate.1500000.build.burn_baudrate=1500000
aiotdaan.menu.burn_baudrate.1000000.build.burn_baudrate=1000000

## Burn tool firmware
aiotdaan.menu.burn_tool_firmware.dan=Default
aiotdaan.menu.burn_tool_firmware.dan.build.burn_tool_firmware=dan

## Point to the file for ./variants/<variant>/pins_arduino.h
aiotdaan.build.variant=lamloei_aiot_daan

## "The 'core' file directory for this board, in ./cores
aiotdaan.build.core=arduino

## This sets a define for use in the compiled code.
aiotdaan.build.board=MAIX_DOCK_M1
aiotdaan.build.sdata.size=512

## This selects the tool from "programmers.txt"
aiotdaan.program.tool=kflash
aiotdaan.upload.tool=kflash

## Limit is the 16MB Flash. Assume half is used for something else.
aiotdaan.upload.maximum_size=8388608
aiotdaan.build.ldscript={runtime.platform.path}/cores/arduino/kendryte-standalone-sdk/lds/kendryte.ld

##################################################
############# IOXGD4 ###############

ioxgd4.name=IOXGD4

## Toolchain
ioxgd4.menu.toolsloc.default=Default
ioxgd4.menu.toolsloc.default.compiler.path={runtime.tools.riscv64-unknown-elf-gcc.path}/bin/

## CPU Clock
ioxgd4.menu.clksrc.400=400MHz CPU Clock Frequency
ioxgd4.menu.clksrc.500=500MHz CPU Clock Frequency
ioxgd4.menu.clksrc.600=600MHz CPU Clock Frequency
ioxgd4.menu.clksrc.400.build.f_cpu=400000000L
ioxgd4.menu.clksrc.500.build.f_cpu=500000000L
ioxgd4.menu.clksrc.600.build.f_cpu=600000000L

## Burn baud rate
ioxgd4.menu.burn_baudrate.2000000=2 Mbps
ioxgd4.menu.burn_baudrate.1500000=1.5 Mbps
ioxgd4.menu.burn_baudrate.1000000=1 Mbps
ioxgd4.menu.burn_baudrate.2000000.build.burn_baudrate=2000000
ioxgd4.menu.burn_baudrate.1500000.build.burn_baudrate=1500000
ioxgd4.menu.burn_baudrate.1000000.build.burn_baudrate=1000000

## Burn tool firmware
ioxgd4.menu.burn_tool_firmware.dan=Default
ioxgd4.menu.burn_tool_firmware.dan.build.burn_tool_firmware=dan

## Point to the file for ./variants/<variant>/pins_arduino.h
ioxgd4.build.variant=ioxgd4

## "The 'core' file directory for this board, in ./cores
ioxgd4.build.core=arduino

## This sets a define for use in the compiled code.
ioxgd4.build.board=MAIX_DOCK_M1
ioxgd4.build.sdata.size=512

## This selects the tool from "programmers.txt"
ioxgd4.program.tool=kflash
ioxgd4.upload.tool=kflash

## Limit is the 16MB Flash. Assume half is used for something else.
ioxgd4.upload.maximum_size=8388608
ioxgd4.build.ldscript={runtime.platform.path}/cores/arduino/kendryte-standalone-sdk/lds/kendryte.ld