mirror of
https://github.com/makerbase-mks/MKS-TFT35-Firmware.git
synced 2026-03-22 16:46:58 +01:00
1418 lines
36 KiB
C++
1418 lines
36 KiB
C++
/******************** (C) COPYRIGHT 2014 www.makerbase.com.cn ********************
|
||
* 文件名 ：mks_tft_gcode.c
|
||
* 描述 ：1.从u盘读取源文件，每次读取1k字节，轮流写入udiskBuffer.buffer[0]和udiskBuffer.buffer[1]；
|
||
2. 当udiskBuffer.buffer[n]非空时，提取出有效gcode指令，加上前/后缀后,Push到gcodeTxFIFO队列。
|
||
* 作者 ：skyblue
|
||
**********************************************************************************/
|
||
|
||
|
||
#include <stdio.h>
|
||
#include <string.h>
|
||
#include "ff.h"
|
||
#include "mks_tft_fifo.h"
|
||
#include "mks_tft_gcode.h"
|
||
//#include "main.h"
|
||
#include "mks_tft_com.h"
|
||
//**#include "printer.h"
|
||
//**#include "draw_ui.h"
|
||
#include "mks_cfg.h"
|
||
//#include "others.h"
|
||
#include "GUI.h"
|
||
#include "draw_dialog.h"
|
||
#include "draw_ui.h"
|
||
#include "at24cxx.h"
|
||
//#include "repetier.h"
|
||
//#include "HAL.h"
|
||
#include "sdio.h"
|
||
#include "fatfs.h"
|
||
#include "usb_host.h"
|
||
#include "tim.h"
|
||
#include "sd_usr.h"
|
||
#include "draw_print_file.h"
|
||
#include "string.h"
|
||
|
||
|
||
extern uint8_t IsChooseAutoShutdown;
|
||
extern uint8_t close_fail_flg;
|
||
extern uint16_t close_fail_cnt;
|
||
/***************************add******************/
|
||
extern CFG_ITMES gCfgItems;
|
||
extern PRINT_TIME print_time;
|
||
//extern void Btn_putdown_close_machine();
|
||
extern uint32_t rePrintOffset;
|
||
extern char SD_Path[4]; /* SD logical drive path */
|
||
|
||
void mks_clearFile();
|
||
|
||
unsigned char path_bak[15]= {0};
|
||
#if defined(TFT70)
|
||
unsigned char *path_reprint = (unsigned char *)"/mks_pft35.sys";
|
||
#elif defined(TFT35)
|
||
unsigned char *path_reprint = (unsigned char *)"/mks_pft70.sys";
|
||
#endif
|
||
FIL fp_reprint_rw;
|
||
/***************************end******************/
|
||
|
||
struct position Gcode_current_position[30];
|
||
|
||
uint8_t Chk_close_machine_flg = 0;
|
||
|
||
UDISK_DATA_BUFFER udiskBuffer;
|
||
|
||
unsigned char note_flag=1; //注释标志 init : 1
|
||
unsigned long gcodeLineCnt=0; //指令行号编号 Nxxxxx
|
||
|
||
|
||
UDISK_FILE_STAUS udiskFileStaus; //文件状态
|
||
|
||
TARGER_TEMP targetTemp;
|
||
TEMP_STATUS tempStatus;
|
||
void getFanStatus(unsigned char *gcode,unsigned char *end)
|
||
{
|
||
unsigned char tempBuf[30];
|
||
unsigned char i;
|
||
unsigned char *p;
|
||
|
||
if(*gcode == 'M' && *(gcode+1) == '1' && *(gcode+2) == '0'&& (*(gcode+3) == '6' || *(gcode+3) == '7' )) //M106 M107
|
||
{
|
||
p = gcode;
|
||
i=0;
|
||
while(p<end)
|
||
{
|
||
tempBuf[i++]=*p++;
|
||
}
|
||
tempBuf[i] = '\n';
|
||
|
||
pushFIFO(&gcodeCmdRxFIFO,&tempBuf[0]);
|
||
}
|
||
|
||
}
|
||
|
||
void getTargetTemp(unsigned char *gcode,unsigned char *end)
|
||
{
|
||
int8_t *tmpStr_1 = 0;
|
||
|
||
unsigned char tempBuf[80]="ok T:0 /210 B:0 /45 @:0 B@:0";
|
||
unsigned char count;
|
||
unsigned char *p;
|
||
if(tempStatus == temp_ok ) return;
|
||
|
||
p = &tempBuf[0];
|
||
//获取单位 mm or inch ,默认mm
|
||
|
||
if(*gcode == 'G' && *(gcode+1) == '2' && *(gcode+2) == '0' )
|
||
RePrintData.unit = 1; //0 mm,1 inch
|
||
/*
|
||
//20151019
|
||
if(*gcode == 'M' && *(gcode+1) == '1' && (*(gcode+2) == '9' ||*(gcode+2) == '4' )&& *(gcode+3) == '0') //M190 or M140
|
||
{
|
||
gcode += 4;
|
||
count = 0;
|
||
while(*gcode++ != 'S')
|
||
if(count++ > 10) break;
|
||
|
||
while(gcode < end)
|
||
{
|
||
if(*gcode == '.')break;
|
||
*p++ = *gcode++;
|
||
if(p >=&tempBuf[0]+10) break;
|
||
}
|
||
*p = '\0';
|
||
targetTemp.bedTemp = atoi(&tempBuf[0]);
|
||
}
|
||
|
||
if(*gcode == 'M' && *(gcode+1) == '1' && *(gcode+2) == '0'&& (*(gcode+3) == '9' || *(gcode+3) == '4')) //M109 or M104
|
||
{
|
||
gcode += 4;
|
||
count = 0;
|
||
while(*gcode++ != 'S')
|
||
if(count++ > 10) break;
|
||
|
||
while(gcode < end)
|
||
{
|
||
if(*gcode == '.') break;
|
||
*p++ = *gcode++;
|
||
if(p >=&tempBuf[0]+10) break;
|
||
}
|
||
*p = '\0';
|
||
targetTemp.t0Temp = atoi(&tempBuf[0]);
|
||
}
|
||
*/
|
||
if(*gcode == 'M' && *(gcode+1) == '1' && (*(gcode+2) == '9' ||*(gcode+2) == '4' )&& *(gcode+3) == '0') //M190 or M140
|
||
{
|
||
gcode += 4;
|
||
count = 0;
|
||
while(*gcode++ != 'S')
|
||
if(count++ > 10) break;
|
||
|
||
while(gcode < end)
|
||
{
|
||
if(*gcode == '.')break;
|
||
*p++ = *gcode++;
|
||
if(p >=&tempBuf[0]+10) break;
|
||
}
|
||
*p = '\0';
|
||
targetTemp.bedTemp =atoi((const char *)&tempBuf[0]);
|
||
}
|
||
|
||
if(gCfgItems.sprayerNum == 1)
|
||
{
|
||
if(*gcode == 'M' && *(gcode+1) == '1' && *(gcode+2) == '0'&& (*(gcode+3) == '9' || *(gcode+3) == '4')) //M109 or M104
|
||
{
|
||
gcode += 4;
|
||
count = 0;
|
||
while(*gcode++ != 'S')
|
||
if(count++ > 10) break;
|
||
|
||
while(gcode < end)
|
||
{
|
||
if(*gcode == '.') break;
|
||
*p++ = *gcode++;
|
||
if(p >=&tempBuf[0]+10) break;
|
||
}
|
||
*p = '\0';
|
||
targetTemp.t0Temp =atoi((const char *)&tempBuf[0]);
|
||
}
|
||
}
|
||
else
|
||
{
|
||
if(*gcode == 'M' && *(gcode+1) == '1' && *(gcode+2) == '0'&& (*(gcode+3) == '9' || *(gcode+3) == '4')) //M109 or M104
|
||
{
|
||
if((int8_t *)strstr((const char *)gcode, (const char *)"T0"))
|
||
{
|
||
tmpStr_1 = (int8_t *)strstr((const char *)gcode, (const char *)"S");
|
||
if(tmpStr_1)
|
||
{
|
||
gcode = (unsigned char *)tmpStr_1+1;
|
||
while(gcode < end)
|
||
{
|
||
if(*gcode == '.') break;
|
||
*p++ = *gcode++;
|
||
if(p >=&tempBuf[0]+10) break;
|
||
}
|
||
*p = '\0';
|
||
targetTemp.t0Temp = atoi((const char *)&tempBuf[0]);
|
||
}
|
||
}
|
||
else if((int8_t *)strstr((const char *)gcode, (const char *)"T1"))
|
||
{
|
||
tmpStr_1 = (int8_t *)strstr((const char *)gcode, (const char *)"S");
|
||
if(tmpStr_1)
|
||
{
|
||
gcode = (unsigned char *)tmpStr_1+1;
|
||
while(gcode < end)
|
||
{
|
||
if(*gcode == '.') break;
|
||
*p++ = *gcode++;
|
||
if(p >=&tempBuf[0]+10) break;
|
||
}
|
||
*p = '\0';
|
||
targetTemp.t1Temp = atoi((const char *)&tempBuf[0]);
|
||
}
|
||
}
|
||
else
|
||
{
|
||
tmpStr_1 = (int8_t *)strstr((const char *)gcode, (const char *)"S");
|
||
if(tmpStr_1)
|
||
{
|
||
gcode = (unsigned char *)tmpStr_1+1;
|
||
while(gcode < end)
|
||
{
|
||
if(*gcode == '.') break;
|
||
*p++ = *gcode++;
|
||
if(p >=&tempBuf[0]+10) break;
|
||
}
|
||
*p = '\0';
|
||
if(RePrintData.spayerchoose == 1)
|
||
{
|
||
targetTemp.t1Temp = atoi((const char *)&tempBuf[0]);
|
||
}
|
||
else
|
||
{
|
||
targetTemp.t0Temp = atoi((const char *)&tempBuf[0]);
|
||
}
|
||
}
|
||
}
|
||
|
||
}
|
||
|
||
}
|
||
/*
|
||
if((targetTemp.bedTemp > 0 && targetTemp.t0Temp >0) ||( gcodeLineCnt> 50))
|
||
{
|
||
//tempBuf[40]="ok T:0 /210 B:0 /45 @:0 B@:0";
|
||
p = &tempBuf[0];
|
||
*p++ = 'o';*p++ = 'k';*p++ = ' ';*p++ = 'T';*p++ = ':';*p++ = '0';*p++ = ' ';*p++ = '/';
|
||
*p++ = targetTemp.t0Temp/100+48;
|
||
*p++ = (targetTemp.t0Temp/10)%10 + 48;
|
||
*p++ = targetTemp.t0Temp%10 + 48;
|
||
|
||
*p++ = ' '; *p++ = 'B';*p++ = ':';*p++ = '0';*p++ = ' ';*p++ = '/';
|
||
*p++ = targetTemp.bedTemp/10+48;
|
||
*p++ = targetTemp.bedTemp%10 + 48;
|
||
*p++ = ' ';*p++ = '@';*p++ = ':';*p++ = '0';*p++ = ' ';*p++ = 'B';*p++ = '@';*p++ = ':';*p++ = '0';*p++ = '\n';
|
||
|
||
pushFIFO(&gcodeCmdRxFIFO,&tempBuf[0]);
|
||
tempStatus = temp_ok;
|
||
}
|
||
*/
|
||
if((targetTemp.bedTemp > 0)||(targetTemp.t0Temp >0)||(targetTemp.t1Temp >0))
|
||
{
|
||
if(gCfgItems.sprayerNum == 1)
|
||
{
|
||
//tempBuf[40]="ok T:0 /210 B:0 /45 @:0 B@:0";
|
||
p = &tempBuf[0];
|
||
*p++ = 'o';*p++ = 'k';*p++ = ' ';*p++ = 'T';*p++ = ':';
|
||
// *p++ = '0';
|
||
*p++ = ((uint32_t)(gCfgItems.curSprayerTemp[0]))/100+48;
|
||
*p++ = (((uint32_t)(gCfgItems.curSprayerTemp[0]))/10)%10 + 48;
|
||
*p++ = ((uint32_t)(gCfgItems.curSprayerTemp[0]))%10 + 48;
|
||
*p++ = ' ';*p++ = '/';
|
||
*p++ = targetTemp.t0Temp/100+48;
|
||
*p++ = (targetTemp.t0Temp/10)%10 + 48;
|
||
*p++ = targetTemp.t0Temp%10 + 48;
|
||
|
||
*p++ = ' '; *p++ = 'B';*p++ = ':';
|
||
// *p++ = '0';
|
||
*p++ = ((uint32_t)(gCfgItems.curBedTemp))/100+48;
|
||
*p++ = (((uint32_t)(gCfgItems.curBedTemp))/10)%10+48;
|
||
*p++ = ((uint32_t)(gCfgItems.curBedTemp))%10 + 48;
|
||
*p++ = ' ';*p++ = '/';
|
||
*p++ = targetTemp.bedTemp/100+48;
|
||
*p++ = (targetTemp.bedTemp/10)%10+48;
|
||
*p++ = targetTemp.bedTemp%10 + 48;
|
||
*p++ = ' ';*p++ = '@';*p++ = ':';*p++ = '0';*p++ = ' ';*p++ = 'B';*p++ = '@';*p++ = ':';*p++ = '0';*p++ = '\n';
|
||
|
||
pushFIFO(&gcodeCmdRxFIFO,&tempBuf[0]);
|
||
}
|
||
else
|
||
{
|
||
//ok T:0 /210 B:0 /45 T0:0/210 T1:0 /210 @:0 B@:0
|
||
p = &tempBuf[0];
|
||
*p++ = 'o';*p++ = 'k';*p++ = ' ';*p++ = 'T';*p++ = ':';
|
||
// *p++ = '0';
|
||
*p++ = ((uint32_t)(gCfgItems.curSprayerTemp[0]))/100+48;
|
||
*p++ = (((uint32_t)(gCfgItems.curSprayerTemp[0]))/10)%10 + 48;
|
||
*p++ = ((uint32_t)(gCfgItems.curSprayerTemp[0]))%10 + 48;
|
||
*p++ = ' ';*p++ = '/';
|
||
*p++ = targetTemp.t0Temp/100+48;
|
||
*p++ = (targetTemp.t0Temp/10)%10 + 48;
|
||
*p++ = targetTemp.t0Temp%10 + 48;
|
||
//B
|
||
*p++ = ' '; *p++ = 'B';*p++ = ':';
|
||
// *p++ = '0';
|
||
*p++ = ((uint32_t)(gCfgItems.curBedTemp))/100+48;
|
||
*p++ = (((uint32_t)(gCfgItems.curBedTemp))/10)%10+48;
|
||
*p++ = ((uint32_t)(gCfgItems.curBedTemp))%10 + 48;
|
||
*p++ = ' ';*p++ = '/';
|
||
*p++ = targetTemp.bedTemp/100+48;
|
||
*p++ = (targetTemp.bedTemp/10)%10+48;
|
||
*p++ = targetTemp.bedTemp%10 + 48;
|
||
//T0
|
||
*p++ = ' ';*p++ = 'T';*p++ = '0';*p++ = ':';
|
||
// *p++ = '0';
|
||
*p++ = ((uint32_t)(gCfgItems.curSprayerTemp[0]))/100+48;
|
||
*p++ = (((uint32_t)(gCfgItems.curSprayerTemp[0]))/10)%10 + 48;
|
||
*p++ = ((uint32_t)(gCfgItems.curSprayerTemp[0]))%10 + 48;
|
||
*p++ = ' ';*p++ = '/';
|
||
*p++ = targetTemp.t0Temp/100+48;
|
||
*p++ = (targetTemp.t0Temp/10)%10 + 48;
|
||
*p++ = targetTemp.t0Temp%10 + 48;
|
||
//T1
|
||
*p++ = ' ';*p++ = 'T';*p++ = '1';*p++ = ':';
|
||
// *p++ = '0';
|
||
*p++ = ((uint32_t)(gCfgItems.curSprayerTemp[1]))/100+48;
|
||
*p++ = (((uint32_t)(gCfgItems.curSprayerTemp[1]))/10)%10 + 48;
|
||
*p++ = ((uint32_t)(gCfgItems.curSprayerTemp[1]))%10 + 48;
|
||
*p++ = ' ';*p++ = '/';
|
||
*p++ = targetTemp.t1Temp/100+48;
|
||
*p++ = (targetTemp.t1Temp/10)%10 + 48;
|
||
*p++ = targetTemp.t1Temp%10 + 48;
|
||
|
||
|
||
*p++ = ' ';*p++ = '@';*p++ = ':';*p++ = '0';*p++ = ' ';*p++ = 'B';*p++ = '@';*p++ = ':';*p++ = '0';*p++ = '\n';
|
||
|
||
pushFIFO(&gcodeCmdRxFIFO,&tempBuf[0]);
|
||
}
|
||
|
||
}
|
||
|
||
if(gcodeLineCnt> 50)
|
||
{
|
||
tempStatus = temp_ok;
|
||
}
|
||
|
||
}
|
||
|
||
volatile RECOVER_SD rec_sd;
|
||
void udiskBufferInit(void)
|
||
{
|
||
memset(udiskBuffer.buffer[0],'\n',sizeof(udiskBuffer.buffer[0]));
|
||
memset(udiskBuffer.buffer[1],'\n',sizeof(udiskBuffer.buffer[1]));
|
||
|
||
memset(udiskBuffer.mid_buffer[0],'\n',sizeof(udiskBuffer.mid_buffer[0]));
|
||
memset(udiskBuffer.mid_buffer[1],'\n',sizeof(udiskBuffer.mid_buffer[1]));
|
||
|
||
udiskBuffer.current = 0;
|
||
udiskBuffer.p = udiskBuffer.buffer[udiskBuffer.current];
|
||
udiskBuffer.state[udiskBuffer.current] = udisk_buf_full;
|
||
udiskBuffer.state[(udiskBuffer.current+1)%2] = udisk_buf_empty;
|
||
|
||
note_flag = 1;
|
||
gcodeLineCnt = 0;
|
||
RePrintData.record_line = 0;
|
||
|
||
udiskFileStaus = udisk_file_ok;
|
||
/*----------------*/
|
||
targetTemp.bedTemp = 0;
|
||
targetTemp.t0Temp = 0;
|
||
targetTemp.t1Temp = 0;
|
||
targetTemp.t2Temp = 0;
|
||
tempStatus = temp_fail;
|
||
/*----------------*/
|
||
|
||
RePrintData.saveEnable = 0;
|
||
|
||
initFIFO(&gcodeTxFIFO);
|
||
// initFIFO(&gcodeRxFIFO);
|
||
initFIFO(&gcodeCmdTxFIFO);
|
||
initFIFO(&gcodeCmdRxFIFO);
|
||
|
||
//chen 10.8
|
||
rec_sd.just_delay_one = 0;
|
||
rec_sd.total= 0;
|
||
}
|
||
|
||
//DWORD DDKK=0;
|
||
|
||
void udiskFileR(FIL *srcfp1) //读取u盘文件，写入udiskBuffer
|
||
{
|
||
unsigned int readByteCnt=0;
|
||
//unsigned int readByteCnt_Mid=0;
|
||
volatile FRESULT res;
|
||
DWORD fptr_Int,fptr_remainder,srcfp_fptr;
|
||
|
||
|
||
if((udiskBuffer.state[(udiskBuffer.current+1)%2] == udisk_buf_full) && (udiskFileStaus == udisk_file_ok))
|
||
return;
|
||
|
||
switch(udiskFileStaus)
|
||
{
|
||
case udisk_file_ok:
|
||
#if 1
|
||
/*sean test start*/
|
||
//f_lseek(srcfp,500);
|
||
//while(1)
|
||
//{
|
||
/*sean test end*/
|
||
if((srcfp)->fptr % 512 !=0)
|
||
{
|
||
#if 1
|
||
memset(udiskBuffer.mid_buffer[0],'\n',sizeof(udiskBuffer.mid_buffer[0]));
|
||
|
||
/*sean test start*/
|
||
//memset(udiskBuffer.buffer[(udiskBuffer.current+1)%2],'\n',sizeof(udiskBuffer.buffer[(udiskBuffer.current+1)%2]));
|
||
/*sean test end*/
|
||
|
||
srcfp_fptr=(srcfp)->fptr ; //保存文件位置偏移
|
||
fptr_Int=(srcfp)->fptr /512; //取商
|
||
fptr_remainder=(srcfp)->fptr%512; //取余
|
||
f_lseek(srcfp,fptr_Int*512); //定位到512整数倍位置
|
||
|
||
|
||
if(((srcfp)->fsize - fptr_Int*512) <= UDISKBUFLEN) //是否为最后1K数据?
|
||
{
|
||
res=f_read(srcfp,udiskBuffer.mid_buffer[0],((srcfp)->fsize - fptr_Int*512),&readByteCnt); //512整数倍读剩余字节
|
||
strncpy((char *)udiskBuffer.buffer[(udiskBuffer.current+1)%2],(const char *)&udiskBuffer.mid_buffer[0][fptr_remainder-1],UDISKBUFLEN-fptr_remainder+1);//copy数据
|
||
if(res == FR_OK)
|
||
{
|
||
(srcfp)->fptr =(srcfp)->fsize; // 文件偏移等于文件大小
|
||
}
|
||
}
|
||
else
|
||
{
|
||
res=f_read(srcfp,udiskBuffer.mid_buffer[0],UDISKBUFLEN,&readByteCnt);//先读1k
|
||
strncpy((char *)udiskBuffer.buffer[(udiskBuffer.current+1)%2],(const char *)&udiskBuffer.mid_buffer[0][fptr_remainder-1],UDISKBUFLEN-fptr_remainder+1);//copy数据
|
||
if(res == FR_OK)
|
||
{
|
||
//rec_sd.total += readByteCnt;
|
||
|
||
}
|
||
|
||
memset(udiskBuffer.mid_buffer[0],'\n',sizeof(udiskBuffer.mid_buffer[0]));
|
||
|
||
res=f_read(srcfp,udiskBuffer.mid_buffer[0],UDISKBUFLEN,&readByteCnt);//再读1k
|
||
strncpy((char *)&udiskBuffer.buffer[(udiskBuffer.current+1)%2][UDISKBUFLEN-fptr_remainder+1],(const char *)udiskBuffer.mid_buffer[0],fptr_remainder-1);//copy数据
|
||
//读出的字节比余数大,还有数据需要读出将文件偏移定位为原先位置+1K
|
||
if(readByteCnt > fptr_remainder-1)f_lseek(srcfp,srcfp_fptr+UDISKBUFLEN);
|
||
else if(res == FR_OK)(srcfp)->fptr =(srcfp)->fsize; // 文件偏移等于文件大小
|
||
}
|
||
|
||
/*for(int i=0;i<UDISKBUFLEN;i++)
|
||
{
|
||
if(i<(UDISKBUFLEN-fptr_remainder))
|
||
udiskBuffer.buffer[(udiskBuffer.current+1)%2][i]=udiskBuffer.mid_buffer[0][i+fptr_remainder];
|
||
else
|
||
udiskBuffer.buffer[(udiskBuffer.current+1)%2][i]=udiskBuffer.mid_buffer[1][i-(UDISKBUFLEN-fptr_remainder)];
|
||
}
|
||
|
||
if(readByteCnt_Mid < UDISKBUFLEN )
|
||
f_lseek(srcfp,srcfp_fptr+readByteCnt_Mid);
|
||
else
|
||
f_lseek(srcfp,srcfp_fptr+UDISKBUFLEN);*/
|
||
#else
|
||
if(((srcfp)->fptr%512)>256)
|
||
{
|
||
fptr_remainder=(srcfp)->fptr + (512-(srcfp)->fptr%512);
|
||
f_lseek(srcfp,fptr_remainder);
|
||
}
|
||
else
|
||
{
|
||
fptr_remainder=(srcfp)->fptr -((srcfp)->fptr%512);
|
||
f_lseek(srcfp,fptr_remainder);
|
||
}
|
||
f_read(srcfp,udiskBuffer.buffer[(udiskBuffer.current+1)%2],UDISKBUFLEN,&readByteCnt);
|
||
|
||
#endif
|
||
|
||
}
|
||
else
|
||
{
|
||
res=f_read(srcfp,udiskBuffer.buffer[(udiskBuffer.current+1)%2],UDISKBUFLEN,&readByteCnt);
|
||
}
|
||
/*sean test start*/
|
||
//}
|
||
/*sean test end*/
|
||
//sean 12.1
|
||
if(res == FR_OK)
|
||
{
|
||
//rec_sd.total += readByteCnt;
|
||
|
||
udiskBuffer.state[(udiskBuffer.current+1)%2] = udisk_buf_full;
|
||
|
||
if((srcfp)->fptr >=(srcfp)->fsize )
|
||
{
|
||
udiskFileStaus = udisk_file_end;
|
||
fileEndCnt = 30000;
|
||
}
|
||
}
|
||
else
|
||
{
|
||
memset(udiskBuffer.buffer[(udiskBuffer.current+1)%2],'\n',sizeof(udiskBuffer.buffer[(udiskBuffer.current+1)%2]));
|
||
|
||
//if(srcfp->fsize > rec_sd.total)
|
||
{
|
||
//chen 9.29
|
||
//接收到ok后不再发送gcode数据
|
||
usart2Data.prWaitStatus = pr_wait_idle;
|
||
|
||
if(rec_sd.just_delay_one == 0)
|
||
tftDelay(2000); //阻止重复延时
|
||
|
||
rec_sd.just_delay_one = 1;
|
||
|
||
Restart_data_init();
|
||
}
|
||
}
|
||
|
||
#endif
|
||
|
||
break;
|
||
case udisk_file_end:
|
||
|
||
if((udiskBuffer.state[0] == udisk_buf_empty && udiskBuffer.state[1] == udisk_buf_empty && checkFIFO(&gcodeTxFIFO)== fifo_empty)) //打印结束
|
||
{
|
||
tftDelay(3);
|
||
printerInit();
|
||
tftDelay(3);
|
||
|
||
//**I2C_EE_Init(100000);
|
||
MX_I2C1_Init(100000); //**
|
||
|
||
HAL::AT24CXX_Read(BAK_REPRINT_INFO, (uint8_t *)&dataToEeprom, 4);
|
||
dataToEeprom &= 0x00ffffff;
|
||
dataToEeprom |= (uint32_t)(printer_normal << 24 ) & 0xff000000;
|
||
HAL::AT24CXX_Write(BAK_REPRINT_INFO,(uint8_t *)&dataToEeprom , 4); // 续打标志(uint8_t) | 单位unit (uint8_t) | saveFlag(uint8_t)| null(uint8_t)
|
||
|
||
printerStaus = pr_idle; //打印结束
|
||
usart2Data.printer = printer_idle;
|
||
usart2Data.prWaitStatus = pr_wait_idle;
|
||
usart2Data.timer = timer_stop; //清除定时器
|
||
|
||
#ifdef SAVE_FROM_SD
|
||
//删除续打数据文件。
|
||
if(gCfgItems.pwroff_save_mode == 0)
|
||
mks_clearFile();
|
||
|
||
/*
|
||
if(gCfgItems.pwroff_save_mode == 0)
|
||
{
|
||
if(gCfgItems.fileSysType == FILE_SYS_SD)
|
||
{
|
||
strcpy((char *)path_bak, "1:");
|
||
strcat((char *)path_bak,(const char *)path_reprint);
|
||
f_unlink((const char *)path_bak);
|
||
}
|
||
else
|
||
{
|
||
strcpy((char *)path_bak, "0:");
|
||
strcat((char *)path_bak,(const char *)path_reprint);
|
||
f_unlink((const char *)path_bak);
|
||
}
|
||
}
|
||
*/
|
||
#endif
|
||
|
||
if((gCfgItems.print_finish_close_machine_flg == 1)&&(IsChooseAutoShutdown == 1))
|
||
{
|
||
//Print_finish_close_machine();
|
||
Btn_putdown_close_machine();
|
||
IsChooseAutoShutdown = 0;
|
||
clear_cur_ui();
|
||
#if 0
|
||
//GUI_SetFont(&FONT_TITLE);
|
||
if(gCfgItems.language == LANG_COMPLEX_CHINESE)
|
||
{
|
||
GUI_SetFont(&GUI_FontHZ16);
|
||
}
|
||
else
|
||
{
|
||
GUI_SetFont(&FONT_TITLE);
|
||
}
|
||
|
||
if(gCfgItems.language == LANG_ENGLISH)
|
||
{
|
||
GUI_DispStringAt("Print end! Closing Machine...", 300, 200);
|
||
}
|
||
else if(gCfgItems.language == LANG_COMPLEX_CHINESE)
|
||
{
|
||
GUI_DispStringAt("打印完成!正在關機...", 300, 200);
|
||
}
|
||
else
|
||
{
|
||
GUI_DispStringAt("打印完成! 正在关机...", 300, 200);
|
||
}
|
||
#endif
|
||
GUI_DispStringAt(common_menu.close_machine_tips, 300, 200);
|
||
close_fail_flg = 1;
|
||
close_fail_cnt = 0;
|
||
while(close_fail_flg);
|
||
clear_cur_ui();
|
||
draw_dialog(DIALOG_TYPE_M80_FAIL);
|
||
}
|
||
}
|
||
|
||
if(udiskBuffer.state[udiskBuffer.current] == udisk_buf_empty)
|
||
{
|
||
udiskBuffer.current = (udiskBuffer.current+1)%2;
|
||
udiskBuffer.p = udiskBuffer.buffer[udiskBuffer.current];
|
||
}
|
||
|
||
break;
|
||
default : break;
|
||
}
|
||
}
|
||
|
||
volatile FRESULT res_ok;
|
||
extern FATFS fs;
|
||
extern int8_t curDirLever;
|
||
extern DIR_OFFSET dir_offset[10];
|
||
void Restart_data_init()
|
||
{
|
||
volatile uint8_t record_cnt;
|
||
volatile uint16_t last_tick;
|
||
|
||
//memset(gCurDir, 0, sizeof(gCurDir));
|
||
|
||
f_close(srcfp);
|
||
curDirLever = 0;
|
||
dir_offset[curDirLever].curPage = 0;
|
||
|
||
sd.Sd_file_offset = 0;
|
||
sd.Sd_file_cnt = 0;
|
||
|
||
memset(dir_offset, 0, sizeof(dir_offset));
|
||
|
||
memset(sd.gCurDir, 0, sizeof(sd.gCurDir));
|
||
#if _LFN_UNICODE
|
||
sd.gCurDir[0] = '1';
|
||
sd.gCurDir[1] = ':';
|
||
#else
|
||
if((gCfgItems.fileSysType == FILE_SYS_SD))
|
||
{
|
||
if(SD_DET_IP == SDCARDDETECTINVERTED)
|
||
{
|
||
FATFS_LinkDriver_sd(&SD_Driver, SD_Path);
|
||
f_mount(&fs, (TCHAR const*)SD_Path, 0);
|
||
}
|
||
strcpy((char *)sd.gCurDir, "1:"); //skyblue-modify
|
||
}
|
||
else
|
||
{
|
||
FATFS_LinkDriver_usb(&USBH_Driver, USBH_Path);
|
||
f_mount(&fs, (TCHAR const*)USBH_Path, 0);
|
||
strcpy((char *)sd.gCurDir, "0:");
|
||
}
|
||
|
||
#endif
|
||
|
||
|
||
res_ok=f_open(srcfp,curFileName,FA_READ);
|
||
if(res_ok == FR_OK)
|
||
{
|
||
rec_sd.just_delay_one = 0;
|
||
//找到对应行的文件偏移
|
||
do
|
||
{
|
||
for(record_cnt=0;record_cnt<30;record_cnt++)
|
||
{
|
||
if(Gcode_current_position[record_cnt].Gcode_LineNumb == (RePrintData.record_line))
|
||
{
|
||
RePrintData.offset = Gcode_current_position[record_cnt].Gcode_fileOffset;
|
||
break;
|
||
}
|
||
}
|
||
}while(record_cnt == 30 && RePrintData.record_line--);
|
||
|
||
f_lseek(srcfp, RePrintData.offset);
|
||
|
||
initFIFO(&gcodeTxFIFO);
|
||
initFIFO(&gcodeCmdTxFIFO);
|
||
initFIFO(&gcodeCmdRxFIFO);
|
||
|
||
memset(udiskBuffer.buffer[0],'\n',sizeof(udiskBuffer.buffer[0]));
|
||
memset(udiskBuffer.buffer[1],'\n',sizeof(udiskBuffer.buffer[1]));
|
||
udiskBuffer.current = 0;
|
||
udiskBuffer.p = udiskBuffer.buffer[udiskBuffer.current];
|
||
udiskBuffer.state[udiskBuffer.current] = udisk_buf_full;
|
||
udiskBuffer.state[(udiskBuffer.current+1)%2] = udisk_buf_empty;
|
||
|
||
note_flag = 1;
|
||
gcodeLineCnt = 0;
|
||
RePrintData.record_line = 0;
|
||
|
||
//填指令
|
||
while(checkFIFO(&gcodeTxFIFO)!= fifo_full)
|
||
{
|
||
udiskFileR(srcfp);
|
||
pushTxGcode();
|
||
/*last_tick=getTick();
|
||
if(getTickDiff(last_tick, getTick()) > 4000)
|
||
break; */
|
||
}
|
||
//发N-1 M110*15
|
||
printerInit();
|
||
}
|
||
}
|
||
|
||
void pushTxGcode(void) //从udiskBuffer数据中提取出有效的gcode指令，并加上行号，push到gcodeTxFIFO
|
||
{
|
||
|
||
int8_t *Ztemp;
|
||
int8_t *Ftemp;
|
||
unsigned char i=0;
|
||
|
||
static unsigned char position_cnt = 0;
|
||
unsigned char numb_cnt = 0;
|
||
|
||
unsigned char gcode[FIFO_SIZE]; //存储从udiskBuffer提取的一条gcode
|
||
unsigned char *p=gcode; //指向gcode的指针
|
||
unsigned char gcode_tx[FIFO_SIZE]={0}; //可发送的gcode指令，加了行号和校验码
|
||
unsigned char *p_tx=gcode_tx; //指向gcode_tx的指针
|
||
unsigned long gcodeLineCnt_b; //暂存gcodeLineCnt
|
||
unsigned char lineCntBuf[20]; //存储行号字符串
|
||
unsigned char *p_cnt=lineCntBuf;
|
||
unsigned char checkSum=0; //校验和
|
||
unsigned char ulockCnt=0; //长注释 计数，防止 搜索长数据，导致不能从udisk读取文件，造成死锁
|
||
|
||
if(checkFIFO(&gcodeTxFIFO)== fifo_full) //队列满
|
||
return;
|
||
|
||
if(udiskBuffer.state[udiskBuffer.current] == udisk_buf_empty) //buffer空
|
||
return;
|
||
|
||
while(*udiskBuffer.p != '\n' && *udiskBuffer.p != '\r') //行结束
|
||
{
|
||
if(p-gcode > (FIFO_SIZE-10)) //一行指令太长，结束，并注释掉后续字符
|
||
{
|
||
*(udiskBuffer.p +1)= ';';
|
||
break;
|
||
}
|
||
|
||
//if(ulockCnt++ > FIFO_SIZE && p == gcode) //防止长注释 造成死锁
|
||
//{
|
||
// return;
|
||
//}
|
||
|
||
|
||
|
||
if(*udiskBuffer.p == ';') //去掉 ';' 后面的注释
|
||
note_flag = 0;
|
||
|
||
if(note_flag)
|
||
*p++ = *udiskBuffer.p++; //提取有效gcode指令
|
||
else
|
||
udiskBuffer.p++;
|
||
|
||
if(udiskBuffer.p == udiskBuffer.buffer[udiskBuffer.current]+ UDISKBUFLEN) //当前buffer 读取结束,转换到另一buffer
|
||
{
|
||
memset(udiskBuffer.buffer[udiskBuffer.current],'\n',sizeof(udiskBuffer.buffer[0])); //buffer 数据置'\n'
|
||
udiskBuffer.state[udiskBuffer.current] = udisk_buf_empty; //buffer 状态置empty
|
||
udiskBuffer.current = (udiskBuffer.current+1)%2; //转下一个buffer
|
||
udiskBuffer.p = udiskBuffer.buffer[udiskBuffer.current]; //地址指向下一个buffer
|
||
}
|
||
|
||
if(ulockCnt++ > FIFO_SIZE && p == gcode) //防止长注释 造成死锁
|
||
{
|
||
return;
|
||
}
|
||
|
||
|
||
}
|
||
udiskBuffer.p++; //跳过'\n'字符
|
||
if(udiskBuffer.p == udiskBuffer.buffer[udiskBuffer.current]+ UDISKBUFLEN) //当前buffer 读取结束,转换到另一buffer
|
||
{
|
||
memset(udiskBuffer.buffer[udiskBuffer.current],'\n',sizeof(udiskBuffer.buffer[0])); //buffer 数据置'\n'
|
||
udiskBuffer.state[udiskBuffer.current] = udisk_buf_empty; //buffer 状态置empty
|
||
udiskBuffer.current = (udiskBuffer.current+1)%2; //转下一个buffer
|
||
udiskBuffer.p = udiskBuffer.buffer[udiskBuffer.current]; //地址指向下一个buffer
|
||
}
|
||
|
||
note_flag = 1;
|
||
|
||
if(p > gcode) //读取到了gcode指令
|
||
{
|
||
while(*(--p) == 32); //去掉gcode指令后多余的空格
|
||
p++;
|
||
|
||
*p_tx++ = 'N'; //加'N'
|
||
|
||
gcodeLineCnt_b = gcodeLineCnt; //加行号
|
||
|
||
|
||
*p_cnt++=gcodeLineCnt_b%10 + 48;
|
||
gcodeLineCnt_b /= 10;
|
||
while(gcodeLineCnt_b!=0)
|
||
{
|
||
*p_cnt++=gcodeLineCnt_b%10 + 48;
|
||
gcodeLineCnt_b /= 10;
|
||
}
|
||
|
||
|
||
while(p_cnt>lineCntBuf)
|
||
*p_tx++ = *--p_cnt;
|
||
|
||
*p_tx++ = 32; //加空格
|
||
|
||
gcodeLineCnt++;
|
||
//单双喷头挤出判断
|
||
if((gcode[0]=='T')&&(gcode[1]=='0'))
|
||
{
|
||
RePrintData.spayerchoose = 0;
|
||
//chen 11.8 保存一次
|
||
gCfgItems.sd_saving = 1;
|
||
}
|
||
if((gcode[0]=='T')&&(gcode[1]=='1'))
|
||
{
|
||
RePrintData.spayerchoose = 1;
|
||
//chen 11.8 保存一次
|
||
gCfgItems.sd_saving = 1;
|
||
}
|
||
//
|
||
getTargetTemp(&gcode[0],p); //获取目标温度
|
||
getFanStatus(&gcode[0],p); //获取风扇状态
|
||
|
||
p_cnt=gcode; //加gcode指令,临时使用p_cnt
|
||
while(p_cnt<p)
|
||
{
|
||
*p_tx++ = *p_cnt++;
|
||
}
|
||
*p_tx++ = '*'; //加'*'
|
||
|
||
//加校验
|
||
p_cnt= gcode_tx;
|
||
while(*p_cnt != '*')
|
||
checkSum ^= *p_cnt++;
|
||
|
||
if(checkSum/100 != 0)
|
||
{
|
||
*p_tx++ = checkSum/100 + 48;
|
||
*p_tx++ = (checkSum/10)%10 + 48;
|
||
*p_tx++ = checkSum%10 + 48;
|
||
}
|
||
else if(checkSum/10 != 0)
|
||
{
|
||
*p_tx++ = checkSum/10 + 48;
|
||
*p_tx++ = checkSum%10 + 48;
|
||
}
|
||
else
|
||
*p_tx++ = checkSum%10 + 48;
|
||
|
||
*p_tx++ = '\n'; //加'\n'
|
||
|
||
//USART2_CR1 &= 0xff9f;
|
||
pushFIFO(&gcodeTxFIFO,&gcode_tx[0]); //入队列
|
||
|
||
Ztemp = (int8_t *)strstr((const char *)&gcode_tx[0],(const char *)"Z");
|
||
if(Ztemp)
|
||
{
|
||
i=0;
|
||
strcpy((char*)gCfgItems.z_display_pos_bak,(char*)gCfgItems.z_display_pos);
|
||
memset((char *)gCfgItems.z_display_pos,0,sizeof(gCfgItems.z_display_pos));
|
||
while((*(Ztemp+1+i)!=' ')&&(*(Ztemp+1+i)!='*')&&(*(Ztemp+1+i)!='\r')&&(*(Ztemp+1+i)!='\n'))
|
||
{
|
||
#ifdef SAVE_FROM_SD
|
||
gCfgItems.sd_saving = 1;
|
||
|
||
gCfgItems.sd_save_flg = 1;
|
||
//gcodeLineCntBak1 = gcodeLineCnt;
|
||
#endif
|
||
|
||
|
||
if((*(Ztemp+1+i)=='+')||(*(Ztemp+1+i)=='-'))
|
||
{
|
||
i++;
|
||
continue;
|
||
}
|
||
else
|
||
{
|
||
gCfgItems.z_display_pos[i] = *(Ztemp+1+i);
|
||
//i++;
|
||
}
|
||
|
||
if(((gCfgItems.z_display_pos[i]>='a')&&(gCfgItems.z_display_pos[i]<='z'))
|
||
||((gCfgItems.z_display_pos[i]>='A')&&(gCfgItems.z_display_pos[i]<='Z')))
|
||
{
|
||
strcpy((char*)gCfgItems.z_display_pos,(char*)gCfgItems.z_display_pos_bak);
|
||
break;
|
||
}
|
||
|
||
i++;
|
||
|
||
if(i>20)break;
|
||
}
|
||
}
|
||
|
||
Ftemp = (int8_t *)strstr((const char *)&gcode_tx[0],(const char *)"F");
|
||
if(Ftemp)
|
||
{
|
||
i=0;
|
||
while((*(Ftemp+i)!=' ')&&((*(Ftemp+i)!='\r'))&&((*(Ftemp+i)!='\n'))&&((*(Ftemp+i)!='*')))
|
||
{
|
||
//速度Fxxxxx\n
|
||
gCfgItems.F_speed[i] = *(Ftemp+i);
|
||
i++;
|
||
|
||
if(i>20)break;
|
||
}
|
||
|
||
gCfgItems.F_speed[i] = '\n';
|
||
}
|
||
|
||
|
||
|
||
RePrintData.offset = f_tell(srcfp)-UDISKBUFLEN;
|
||
if(udiskBuffer.state[(udiskBuffer.current+1)%2] == udisk_buf_full)
|
||
RePrintData.offset -= UDISKBUFLEN;
|
||
RePrintData.offset += udiskBuffer.p - udiskBuffer.buffer[udiskBuffer.current];
|
||
//USART2_CR1 |= 0x0060;
|
||
|
||
//20151012
|
||
Gcode_current_position[position_cnt].Gcode_LineNumb= gcodeLineCnt;
|
||
Gcode_current_position[position_cnt++].Gcode_fileOffset= RePrintData.offset;
|
||
if(position_cnt >= 30)
|
||
{
|
||
position_cnt = 0;
|
||
}
|
||
|
||
|
||
}
|
||
}
|
||
|
||
#ifdef SAVE_FROM_SD
|
||
FIL pfs;
|
||
|
||
void sd_saved_data()
|
||
{
|
||
char string[20];
|
||
//mksReprint.card.openFile(MKS_PFT_NAME, false);
|
||
//if (mksReprint.card.isFileOpen())
|
||
char name[30]={0};
|
||
if((gCfgItems.sd_saving)&&(printerStaus == pr_working))
|
||
{
|
||
if(gCfgItems.fileSysType == FILE_SYS_SD)
|
||
strcpy((char *)name, "1:");
|
||
else
|
||
strcpy((char *)name, "0:");
|
||
|
||
strcat(name,(char *)path_reprint);
|
||
|
||
if (f_open(&pfs, (const TCHAR *)name, FA_OPEN_ALWAYS | FA_READ | FA_WRITE) == FR_OK)
|
||
{
|
||
memset(string,0,sizeof(string));
|
||
strcpy(string,"start\n");
|
||
f_printf(&pfs,string);
|
||
|
||
//保存文件位置
|
||
memset(string,0,sizeof(string));
|
||
sprintf(string,"%d",RePrintData.offset);
|
||
strcat(string,"\n");
|
||
f_printf(&pfs,string);
|
||
//保存打印头温度
|
||
memset(string,0,sizeof(string));
|
||
sprintf(string,"%d",(int)gCfgItems.desireSprayerTemp[0]);
|
||
strcat(string,"\n");
|
||
f_printf(&pfs,string);
|
||
|
||
memset(string,0,sizeof(string));
|
||
sprintf(string,"%d",(int)gCfgItems.desireSprayerTemp[1]);
|
||
strcat(string,"\n");
|
||
f_printf(&pfs,string);
|
||
|
||
//保存热床温度
|
||
memset(string,0,sizeof(string));
|
||
sprintf(string,"%d",(int)gCfgItems.desireBedTemp);
|
||
strcat(string,"\n");
|
||
f_printf(&pfs,string);
|
||
|
||
//保存进度和时间
|
||
//打印时间:hour
|
||
memset(string,0,sizeof(string));
|
||
sprintf(string,"%d",print_time.hours);
|
||
strcat(string,"\n");
|
||
f_printf(&pfs,string);
|
||
|
||
//打印时间:min
|
||
memset(string,0,sizeof(string));
|
||
sprintf(string,"%d",print_time.minutes);
|
||
strcat(string,"\n");
|
||
f_printf(&pfs,string);
|
||
|
||
//保存风扇
|
||
memset(string,0,sizeof(string));
|
||
sprintf(string,"%d",gCfgItems.fanOnoff);
|
||
strcat(string,"\n");
|
||
f_printf(&pfs,string);
|
||
|
||
memset(string,0,sizeof(string));
|
||
sprintf(string,"%d",gCfgItems.fanSpeed);
|
||
strcat(string,"\n");
|
||
f_printf(&pfs,string);
|
||
//保存Z轴高度
|
||
memset(string,0,sizeof(string));
|
||
sprintf(string,"%s",gCfgItems.z_display_pos);
|
||
strcat(string,"\n");
|
||
f_printf(&pfs,string);
|
||
|
||
//保存当前挤出头
|
||
memset(string,0,sizeof(string));
|
||
//chen 11.8
|
||
sprintf(string,"%d",RePrintData.spayerchoose);
|
||
//sprintf(string,"%d",gCfgItems.curSprayerChoose);
|
||
strcat(string,"\n");
|
||
f_printf(&pfs,string);
|
||
|
||
memset(string,0,sizeof(string));
|
||
strcpy(string,"end"); //"end"
|
||
strcat(string,"\n");
|
||
f_printf(&pfs,string);
|
||
|
||
f_close(&pfs);
|
||
}
|
||
|
||
gCfgItems.sd_saving = 0;
|
||
}
|
||
}
|
||
#if 0
|
||
void sd_saved_data()
|
||
{
|
||
unsigned char sd_buf_w[100];
|
||
//FIL fp_reprint_w;
|
||
unsigned int bw_repint;
|
||
unsigned char i=0;
|
||
if((gCfgItems.sd_saving)&&(printerStaus == pr_working))
|
||
{
|
||
memset(sd_buf_w,0,sizeof(sd_buf_w));
|
||
sprintf((char *)sd_buf_w,"P:%d|T0:%.2f|T1:%.2f|B:%.2f|FanOn:%d|FanSp:%d|h:%d|m:%d|Z:%s|C:%d|",\
|
||
RePrintData.offset,gCfgItems.desireSprayerTemp[0],gCfgItems.desireSprayerTemp[1],\
|
||
gCfgItems.desireBedTemp,gCfgItems.fanOnoff,gCfgItems.fanSpeed,\
|
||
print_time.hours,print_time.minutes,gCfgItems.z_display_pos,gCfgItems.curSprayerChoose);
|
||
//strcat(sd_buf_w,gCfgItems.z_display_pos);
|
||
//sd_buf_w的每个值都与0x4D异或(0x4D对应于ASCII的M)
|
||
|
||
for(i=0;i<strlen((const char *)sd_buf_w);i++)
|
||
{
|
||
sd_buf_w[i] = sd_buf_w[i]^0x4d;
|
||
}
|
||
|
||
if(gCfgItems.fileSysType == FILE_SYS_SD)
|
||
{
|
||
//FATFS_LinkDriver_sd(&SD_Driver, SD_Path);
|
||
//f_mount(&fs, (TCHAR const*)SD_Path, 0); //
|
||
strcpy((char *)path_bak, "1:");
|
||
}
|
||
else
|
||
{
|
||
//FATFS_LinkDriver_usb(&SD_Driver, USBH_Path);
|
||
//f_mount(&fs, (TCHAR const*)USBH_Path, 0); //
|
||
strcpy((char *)path_bak, "0:");
|
||
}
|
||
|
||
|
||
strcat((char *)path_bak,(const char *)path_reprint);
|
||
if(f_open(&fp_reprint_rw, (const char *)path_bak, FA_WRITE|FA_OPEN_ALWAYS)== FR_OK)
|
||
{
|
||
f_write(&fp_reprint_rw, sd_buf_w, 100,&bw_repint);
|
||
f_close(&fp_reprint_rw);
|
||
gCfgItems.sd_saving = 0;
|
||
}
|
||
}
|
||
}
|
||
#endif
|
||
uint32_t pfspos;
|
||
|
||
int16_t pft_get()
|
||
{
|
||
BYTE readByte;
|
||
UINT rc;
|
||
if (f_read(&pfs, &readByte, 1, &rc) != FR_OK)
|
||
{
|
||
readByte = -1;
|
||
}
|
||
else
|
||
{
|
||
pfspos += rc;
|
||
}
|
||
return (int16_t) readByte;
|
||
};
|
||
|
||
bool mks_get_commands() {
|
||
char string[20];
|
||
char commands_count = 0;
|
||
uint16_t sd_count = 0;
|
||
bool end_ok = false;
|
||
|
||
while(pfspos < pfs.fsize)
|
||
{
|
||
const int16_t n = pft_get();
|
||
if(n == -1) break;
|
||
char sd_char = (char)n;
|
||
|
||
if ( sd_char == '\n') //"start\r\n"
|
||
{
|
||
string[sd_count-1] = 0; //去掉 "\r"
|
||
switch(commands_count)
|
||
{
|
||
case 0: //start
|
||
break;
|
||
case 1: //读取文件位置
|
||
RePrintData.offset = atoi(string);
|
||
rePrintOffset = RePrintData.offset;
|
||
break;
|
||
case 2: //读取打印头温度
|
||
gCfgItems.desireSprayerTemp[0] = atoi(string);
|
||
break;
|
||
case 3: //读取打印头温度
|
||
gCfgItems.desireSprayerTemp[1] = atoi(string);
|
||
break;
|
||
case 4: //读取热床温度
|
||
gCfgItems.desireBedTemp = atoi(string);
|
||
break;
|
||
case 5: //hour
|
||
print_time.hours= atoi(string);
|
||
break;
|
||
case 6: //min
|
||
print_time.minutes= atoi(string);
|
||
break;
|
||
case 7: //读取风扇开关
|
||
gCfgItems.fanOnoff = atoi(string);
|
||
break;
|
||
case 8: //读取风扇风速
|
||
gCfgItems.fanSpeed = atoi(string);
|
||
break;
|
||
case 9: //读取风扇风速
|
||
strcpy((char *)gCfgItems.z_display_pos,string);
|
||
break;
|
||
case 10: //读取当前挤出头
|
||
gCfgItems.curSprayerChoose = atoi(string);
|
||
break;
|
||
case 11: //end
|
||
if(strcmp(string,"end") == 0)
|
||
end_ok = true;
|
||
break;
|
||
default: break;
|
||
|
||
}
|
||
|
||
sd_count = 0;
|
||
memset(string,0,sizeof(string));
|
||
commands_count++;
|
||
}
|
||
else
|
||
{
|
||
string[sd_count++] = sd_char;
|
||
}
|
||
|
||
}
|
||
return(end_ok);
|
||
}
|
||
|
||
extern FATFS fs;
|
||
extern __IO uint32_t delaycnt1;
|
||
extern USBH_HandleTypeDef hUsbHostFS;
|
||
|
||
void sd_data_recover()
|
||
{
|
||
bool get_ok = false;
|
||
char name[30]={0};
|
||
|
||
if(gCfgItems.fileSysType == FILE_SYS_SD)
|
||
{
|
||
FATFS_LinkDriver_sd(&SD_Driver, SD_Path);
|
||
f_mount(&fs, (TCHAR const*)SD_Path, 0); //skyblue 2016-12-13 //**
|
||
strcpy((char *)path_bak, "1:");
|
||
}
|
||
else
|
||
{
|
||
FATFS_LinkDriver_usb(&USBH_Driver, USBH_Path);
|
||
f_mount(&fs, (TCHAR const*)USBH_Path, 0); //skyblue 2016-12-13 //**
|
||
strcpy((char *)path_bak, "0:");
|
||
}
|
||
|
||
strcat(name,(char *)path_bak);
|
||
strcat(name,(const char *)path_reprint);
|
||
|
||
if (f_open(&pfs, (const TCHAR *)name, FA_OPEN_EXISTING | FA_READ) == FR_OK)
|
||
{
|
||
pfspos = 0;
|
||
get_ok = mks_get_commands();
|
||
f_close(&pfs);
|
||
if(get_ok)
|
||
{
|
||
gCfgItems.rePrintFlag = printer_pwdwn_reprint;
|
||
RePrintData.printerStatus = printer_pwdwn_reprint;
|
||
}
|
||
}
|
||
|
||
return;//(get_ok);
|
||
|
||
}
|
||
|
||
void mks_clearFile()
|
||
{
|
||
char string[20]="clear";
|
||
char name[30]={0};
|
||
|
||
if(gCfgItems.fileSysType == FILE_SYS_SD)
|
||
strcpy((char *)name, "1:");
|
||
else
|
||
strcpy((char *)name, "0:");
|
||
|
||
strcat(name,(char *)path_reprint);
|
||
|
||
if (f_open(&pfs, (const TCHAR *)name, FA_CREATE_ALWAYS | FA_WRITE) == FR_OK)
|
||
{
|
||
f_printf(&pfs,string);
|
||
f_close(&pfs);
|
||
}
|
||
}
|
||
#if 0
|
||
extern FATFS fs;
|
||
|
||
void sd_data_recover()
|
||
{
|
||
const char *sdstr_temp;
|
||
unsigned char i=0;
|
||
char sdread_temp[20]={0};
|
||
//FIL fp_reprint_r;
|
||
unsigned char sd_buf_r[100];
|
||
unsigned int br_repint;
|
||
|
||
if(gCfgItems.fileSysType == FILE_SYS_SD)
|
||
{
|
||
//**f_mount(1, (const char *)&fs);
|
||
FATFS_LinkDriver_sd(&SD_Driver, SD_Path);
|
||
f_mount(&fs, (TCHAR const*)SD_Path, 0); //skyblue 2016-12-13 //**
|
||
strcpy((char *)path_bak, "1:");
|
||
}
|
||
else
|
||
{
|
||
FATFS_LinkDriver_usb(&SD_Driver, USBH_Path);
|
||
f_mount(&fs, (TCHAR const*)USBH_Path, 0); //skyblue 2016-12-13 //**
|
||
strcpy((char *)path_bak, "0:");
|
||
|
||
}
|
||
|
||
|
||
strcat((char *)path_bak,(const char *)path_reprint);
|
||
if(f_open(&fp_reprint_rw, (const char *)path_bak, FA_READ)== FR_OK)
|
||
{
|
||
memset(sd_buf_r,0,sizeof(sd_buf_r));
|
||
f_read(&fp_reprint_rw, sd_buf_r, 100, &br_repint);
|
||
//sd_buf_r的每个值都与0x4D异或(0x4D对应于ASCII的M)
|
||
|
||
for(i=0;i<strlen((const char *)sd_buf_r);i++)
|
||
{
|
||
sd_buf_r[i] = sd_buf_r[i]^0x4d;
|
||
}
|
||
|
||
sdstr_temp = strstr((const char *)sd_buf_r,(const char *)"P:");
|
||
if(sdstr_temp)
|
||
{
|
||
i=0;
|
||
while(*(sdstr_temp+2+i)!='|')
|
||
{
|
||
sdread_temp[i] = *(sdstr_temp+2+i);
|
||
i++;
|
||
if(i>20)break;
|
||
}
|
||
sdread_temp[i] = 0;
|
||
RePrintData.offset = atoi(sdread_temp);
|
||
rePrintOffset = RePrintData.offset;
|
||
}
|
||
|
||
sdstr_temp = strstr((const char *)sd_buf_r,(const char *)"T0:");
|
||
if(sdstr_temp)
|
||
{
|
||
i=0;
|
||
while(*(sdstr_temp+3+i)!='|')
|
||
{
|
||
sdread_temp[i] = *(sdstr_temp+3+i);
|
||
i++;
|
||
if(i>20)break;
|
||
}
|
||
sdread_temp[i] = 0;
|
||
gCfgItems.desireSprayerTemp[0] = atoi(sdread_temp);
|
||
}
|
||
sdstr_temp = strstr((const char *)sd_buf_r,(const char *)"T1:");
|
||
if(sdstr_temp)
|
||
{
|
||
i=0;
|
||
while(*(sdstr_temp+3+i)!='|')
|
||
{
|
||
sdread_temp[i] = *(sdstr_temp+3+i);
|
||
i++;
|
||
if(i>20)break;
|
||
}
|
||
sdread_temp[i] = 0;
|
||
gCfgItems.desireSprayerTemp[1] = atoi(sdread_temp);
|
||
}
|
||
sdstr_temp = strstr((const char *)sd_buf_r,(const char *)"B:");
|
||
if(sdstr_temp)
|
||
{
|
||
i=0;
|
||
while(*(sdstr_temp+2+i)!='|')
|
||
{
|
||
sdread_temp[i] = *(sdstr_temp+2+i);
|
||
i++;
|
||
if(i>20)break;
|
||
}
|
||
sdread_temp[i] = 0;
|
||
gCfgItems.desireBedTemp = atoi(sdread_temp);
|
||
}
|
||
sdstr_temp = strstr((const char *)sd_buf_r,(const char *)"FanSp:");
|
||
if(sdstr_temp)
|
||
{
|
||
i=0;
|
||
while(*(sdstr_temp+6+i)!='|')
|
||
{
|
||
sdread_temp[i] = *(sdstr_temp+6+i);
|
||
i++;
|
||
if(i>20)break;
|
||
}
|
||
sdread_temp[i] = 0;
|
||
gCfgItems.fanSpeed = atoi(sdread_temp);
|
||
}
|
||
sdstr_temp = strstr((const char *)sd_buf_r,(const char *)"FanOn:");
|
||
if(sdstr_temp)
|
||
{
|
||
i=0;
|
||
while(*(sdstr_temp+6+i)!='|')
|
||
{
|
||
sdread_temp[i] = *(sdstr_temp+6+i);
|
||
i++;
|
||
if(i>20)break;
|
||
}
|
||
sdread_temp[i] = 0;
|
||
gCfgItems.fanOnoff = atoi(sdread_temp);
|
||
}
|
||
sdstr_temp = strstr((const char *)sd_buf_r,(const char *)"h:");
|
||
if(sdstr_temp)
|
||
{
|
||
i=0;
|
||
while(*(sdstr_temp+2+i)!='|')
|
||
{
|
||
sdread_temp[i] = *(sdstr_temp+2+i);
|
||
i++;
|
||
if(i>20)break;
|
||
}
|
||
sdread_temp[i] = 0;
|
||
print_time.hours = atoi(sdread_temp);
|
||
}
|
||
sdstr_temp = strstr((const char *)sd_buf_r,(const char *)"m:");
|
||
if(sdstr_temp)
|
||
{
|
||
i=0;
|
||
while(*(sdstr_temp+2+i)!='|')
|
||
{
|
||
sdread_temp[i] = *(sdstr_temp+2+i);
|
||
i++;
|
||
if(i>20)break;
|
||
}
|
||
sdread_temp[i] = 0;
|
||
print_time.minutes= atoi(sdread_temp);
|
||
}
|
||
sdstr_temp = strstr((const char *)sd_buf_r,(const char *)"Z:");
|
||
if(sdstr_temp)
|
||
{
|
||
i=0;
|
||
while(*(sdstr_temp+2+i)!='|')
|
||
{
|
||
gCfgItems.z_display_pos[i] = *(sdstr_temp+2+i);
|
||
i++;
|
||
if(i>20)break;
|
||
}
|
||
gCfgItems.z_display_pos[i] = 0;
|
||
}
|
||
sdstr_temp = strstr((const char *)sd_buf_r,(const char *)"C:");
|
||
if(sdstr_temp)
|
||
{
|
||
i=0;
|
||
while(*(sdstr_temp+2+i)!='|')
|
||
{
|
||
sdread_temp[i] = *(sdstr_temp+2+i);
|
||
i++;
|
||
if(i>20)break;
|
||
}
|
||
sdread_temp[i] = 0;
|
||
gCfgItems.curSprayerChoose = atoi(sdread_temp);
|
||
}
|
||
/*
|
||
sdstr_temp = strstr(sd_buf,"File:");
|
||
if(sdstr_temp)
|
||
{
|
||
i=0;
|
||
while(*(sdstr_temp+2+i)!='\n')
|
||
{
|
||
sdread_temp[i] = *(sdstr_temp+2+i);
|
||
i++;
|
||
if(i>100)break;
|
||
}
|
||
sdread_temp[i] = 0;
|
||
strcpy(sdread_temp,curFileName);
|
||
}
|
||
*/
|
||
f_close(&fp_reprint_rw);
|
||
|
||
gCfgItems.rePrintFlag = printer_pwdwn_reprint;
|
||
RePrintData.printerStatus = printer_pwdwn_reprint;
|
||
}
|
||
|
||
|
||
}
|
||
#endif
|
||
|
||
#endif
|
||
|
||
|