mirror of
https://github.com/luc-github/ESP3DLib.git
synced 2026-03-07 16:36:51 +01:00
afccedd91f
Fix crash at start due to cuncurrence of serial access and task creation Use idle task to start faster the wifi Avoid echo of command to serial - allow only answers but esp ones
283 lines
11 KiB
Plaintext
283 lines
11 KiB
Plaintext
Note:
|
|
1 - add space to separate parameters
|
|
2 - if parameter has space add \\ in front of space to not be seen as separator
|
|
3 - json json=YES json=TRUE json=1 are paremeters to switch output to json
|
|
By default output is plain text, to get json formated output
|
|
add json or json=yes after main parameters
|
|
The json format is {
|
|
cmd:"<command id>", //the id of requested command
|
|
status:"<ok/error>" //give if it is success or an failure
|
|
data:"<response>" // response corresponding to answer in json format too
|
|
}
|
|
|
|
|
|
*Show commands help
|
|
[ESP]<command id> json=<no>
|
|
|
|
* Set/Get STA SSID
|
|
[ESP100]<SSID> json=<no> pwd=<admin password for set/get & user password to get>
|
|
|
|
* Set STA Password
|
|
[ESP101]<Password> json=<no> pwd=<admin password>
|
|
|
|
* Set/Get STA IP mode (DHCP/STATIC)
|
|
[ESP102]<mode> json=<no> pwd=<admin password>
|
|
|
|
* Set/Get STA IP/Mask/GW/DNS
|
|
[ESP103]IP=<IP> MSK=<IP> GW=<IP> DNS=<IP> json=<no> pwd=<admin password>
|
|
|
|
* Set/Get sta fallback mode which can be WIFI-AP, BT, OFF
|
|
[ESP104]<state> json=<no> pwd=<admin password>
|
|
|
|
* Set/Get AP SSID
|
|
[ESP105]<SSID> json=<no> pwd=<admin password>
|
|
|
|
* Change AP Password
|
|
[ESP106]<Password> json=<no> pwd=<admin password>
|
|
|
|
* Set/Get AP IP
|
|
[ESP107]<IP> json=<no> pwd=<admin password>
|
|
|
|
* Set/Get AP channel
|
|
[ESP108]<channel> json=<no> pwd=<admin password>
|
|
|
|
* Set/Get radio state which can be WIFI-STA, WIFI-AP, BT, ETH-STA, ETH-AP, OFF
|
|
[ESP110]<state> json=<no> pwd=<admin password>
|
|
|
|
* Get current IP
|
|
[ESP111]json=<no>
|
|
|
|
* Get/Set hostname
|
|
[ESP112]<Hostname> json=<no> pwd=<admin password>
|
|
|
|
* Get /Set Boot radio state which can be ON, OFF
|
|
[ESP114]<state> json=<no> pwd=<user/admin password>
|
|
|
|
* Get/Set immediate network(WiFi/BT/Ethernet) state which can be ON, OFF
|
|
[ESP115]<state> json=<no> pwd=<admin password>
|
|
|
|
* Get/Set HTTP state which can be ON, OFF
|
|
[ESP120]<state> json=<no> pwd=<admin password>
|
|
|
|
* Get/Set HTTP port
|
|
[ESP121]<port> json=<no> pwd=<admin password>
|
|
|
|
* Get/Set Telnet state which can be ON, OFF, CLOSE
|
|
[ESP130]<state> json=<no> pwd=<admin password>
|
|
|
|
* Get/Set Telnet port
|
|
[ESP131]<port> json=<no> pwd=<admin password>
|
|
|
|
* Sync / Set / Get current time
|
|
[ESP140]<SYNC> <srv1=XXXXX> <srv2=XXXXX> <srv3=XXXXX> <zone=xxx> <dst=YES/NO> <time=YYYY-MM-DD#H24:MM:SS> <NOW> json=<no> pwd=<admin password>
|
|
|
|
* Get/Set display/set boot delay in ms / Verbose boot
|
|
[ESP150]<delay=time in milliseconds><verbose=ON/OFF>[pwd=<admin password>]
|
|
|
|
* Get/Set WebSocket state which can be ON, OFF
|
|
[ESP160]<state> json=<no> pwd=<admin password>
|
|
|
|
* Get/Set WebSocket port
|
|
[ESP161]<port> json=<no> pwd=<admin password>
|
|
|
|
* Get/Set Camera command value / list all values in JSON/plain
|
|
label can be: light/framesize/quality/contrast/brightness/saturation/gainceiling/colorbar/awb/agc/aec/hmirror/vflip/awb_gain/agc_gain/aec_value/aec2/cw/bpc/wpc/raw_gma/lenc/special_effect/wb_mode/ae_level
|
|
[ESP170]<plain><label=value> json=<no> pwd=<admin password>
|
|
|
|
* Get/Set Ftp state which can be ON, OFF, CLOSE
|
|
[ESP180]<state> json=<no> pwd=<admin password>
|
|
|
|
* Get/Set Ftp ports
|
|
[ESP181]ctrl=<port> active=<port> passive=<port> json=<no> pwd=<admin password>
|
|
|
|
* Get/Set WebDav state which can be ON, OFF, CLOSE
|
|
[ESP190]<state> json=<no> pwd=<admin password>
|
|
|
|
* Get/Set WebDav port
|
|
[ESP191]<port> json=<no> pwd=<admin password>
|
|
|
|
* Get/Set SD Card Status
|
|
[ESP200]<RELEASE> <REFRESH> json=<no> pwd=<user/admin password>
|
|
RELEASE will force the release of SD from ESP3D if SD is shared
|
|
REFRESH will refresh the SD info is available
|
|
|
|
*Get/Set pin value
|
|
[ESP201]P=<pin> V=<value> [PULLUP=YES RAW=YES ANALOG=NO ANALOG_RANGE=255]pwd=<admin password>
|
|
if no V=<value> get P=<pin> value
|
|
if V=<value> 0/1 set INPUT_PULLUP value, but for GPIO16(ESP8266) INPUT_PULLDOWN_16
|
|
if PULLUP=YES set input pull up (for GPIO16(ESP8266) INPUT_PULLDOWN_16), if not set input
|
|
if RAW=YES do not set pinmode just read value
|
|
|
|
Flash pins (6~11) cannot be used
|
|
|
|
*Get/Set SD card Speed factor 1 2 4 6 8 16 32
|
|
[ESP202]SPEED=<value> json=<no> pwd=<user/admin password>
|
|
|
|
*Get Sensor Value / type/Set Sensor type
|
|
[ESP210]<type=NONE/xxx> <interval=XXX in millisec> json=<no> pwd=<user/admin password>
|
|
|
|
* Output to esp screen status
|
|
[ESP214]<Text> json=<no> pwd=<user/admin password>
|
|
|
|
* Touch Calibration
|
|
[ESP215]<CALIBRATE> json=<no> [pwd=<user password>]
|
|
|
|
* Take screen snapshot
|
|
[ESP216]<SNAP> json=<no> [pwd=<user password>]
|
|
|
|
* Play sound
|
|
No parameter just play beep
|
|
[ESP250]F=<frequency> D=<duration> json=<no> [pwd=<user password>]
|
|
|
|
* Delay command
|
|
[ESP290]<delay in ms> json=<no>[pwd=<user password>]
|
|
|
|
* Get full EEPROM settings content
|
|
but do not give any passwords
|
|
[ESP400] pwd=<admin password>
|
|
|
|
*Set EEPROM setting
|
|
position in EEPROM, type: B(byte), I(integer/long), S(string), A(IP address / mask)
|
|
[ESP401]P=<position> T=<type> V=<value> json=<no> pwd=<user/admin password>
|
|
Description: Positions:
|
|
ESP_RADIO_MODE 0 //1 byte = flag
|
|
ESP_STA_SSID 1 //33 bytes 32+1 = string ; warning does not support multibyte char like chinese
|
|
ESP_STA_PASSWORD 34 //65 bytes 64 +1 = string ;warning does not support multibyte char like chinese
|
|
ESP_STA_IP_MODE 99 //1 byte = flag
|
|
ESP_STA_IP_VALUE 100 //4 bytes xxx.xxx.xxx.xxx
|
|
ESP_STA_MASK_VALUE 104 //4 bytes xxx.xxx.xxx.xxx
|
|
ESP_STA_GATEWAY_VALUE 108 //4 bytes xxx.xxx.xxx.xxx
|
|
ESP_BAUD_RATE 112 //4 bytes = int
|
|
ESP_NOTIFICATION_TYPE 116 //1 byte = flag
|
|
ESP_CALIBRATION 117 //1 byte = flag
|
|
ESP_AP_CHANNEL 118 //1 byte = flag
|
|
ESP_BUZZER 119 //1 byte = flag
|
|
ESP_INTERNET_TIME 120 //1 byte = flag
|
|
ESP_HTTP_PORT 121 //4 bytes = int
|
|
ESP_TELNET_PORT 125 //4 bytes = int
|
|
ESP_SERIAL_FLAG 129 //1 bytes = flag
|
|
ESP_HOSTNAME 130 //33 bytes 32+1 = string ; warning does not support multibyte char like chinese
|
|
ESP_SENSOR_INTERVAL 164 //4 bytes = int
|
|
ESP_SETTINGS_VERSION 168 //8 bytes = 7+1 = string ESP3D + 2 digits
|
|
ESP_ADMIN_PWD 176 //21 bytes 20+1 = string ; warning does not support multibyte char like chinese
|
|
ESP_USER_PWD 197 //21 bytes 20+1 = string ; warning does not support multibyte char like chinese
|
|
ESP_AP_SSID 218 //33 bytes 32+1 = string ; warning does not support multibyte char like chinese
|
|
ESP_AP_PASSWORD 251 //65 bytes 64 +1 = string ;warning does not support multibyte char like chinese
|
|
ESP_AP_IP_VALUE 316 //4 bytes xxx.xxx.xxx.xxx
|
|
ESP_BOOT_DELAY 320 //4 bytes = int
|
|
ESP_WEBSOCKET_PORT 324 //4 bytes= int
|
|
ESP_HTTP_ON 328 //1 byte = flag
|
|
ESP_TELNET_ON 329 //1 byte = flag
|
|
ESP_WEBSOCKET_ON 330 //1 byte = flag
|
|
ESP_SD_SPEED_DIV 331 //1 byte = flag
|
|
ESP_NOTIFICATION_TOKEN1 332 //64 bytes 63+1 = string ; warning does not support multibyte char like chinese
|
|
ESP_NOTIFICATION_TOKEN2 396 //64 bytes 63+1 = string ; warning does not support multibyte char like chinese
|
|
ESP_SENSOR_TYPE 460 //1 bytes = flag
|
|
ESP_TARGET_FW 461 //1 bytes = flag
|
|
ESP_TIMEZONE 462 //1 bytes = flag
|
|
ESP_TIME_IS_DST 463 //1 bytes = flag
|
|
ESP_TIME_SERVER1 464 //129 bytes 128+1 = string ; warning does not support multibyte char like chinese
|
|
ESP_TIME_SERVER2 593 //129 bytes 128+1 = string ; warning does not support multibyte char like chinese
|
|
ESP_TIME_SERVER3 722 //129 bytes 128+1 = string ; warning does not support multibyte char like chinese
|
|
ESP_REMOTE_SCREEN 851 //1 bytes = flag
|
|
ESP_SD_MOUNT 852 //1 bytes = flag
|
|
ESP_SESSION_TIMEOUT 853 //1 bytes = flag
|
|
ESP_WEBSOCKET_FLAG 854 //1 bytes = flag
|
|
ESP_SD_CHECK_UPDATE_AT_BOOT 855//1 bytes = flag
|
|
ESP_NOTIFICATION_SETTINGS 856 //129 bytes 128+1 = string ; warning does not support multibyte char like chinese
|
|
ESP_CALIBRATION_1 985 //4 bytes = int
|
|
ESP_CALIBRATION_2 989 //4 bytes = int
|
|
ESP_CALIBRATION_3 993 //4 bytes = int
|
|
ESP_CALIBRATION_4 997 //4 bytes = int
|
|
ESP_CALIBRATION_5 1001 //4 bytes = int
|
|
ESP_SETUP 1005 //1 byte = flag
|
|
ESP_TELNET_FLAG 1006 //1 byte = flag
|
|
ESP_BT_FLAG 1007 //1 byte = flag
|
|
ESP_SCREEEN_FLAG 1008 //1 byte = flag
|
|
ESP_FTP_CTRL_PORT 1009 //4 bytes = int
|
|
ESP_FTP_DATA_ACTIVE_PORT 1013 //4 bytes = int
|
|
ESP_FTP_DATA_PASSIVE_PORT 1017 //4 bytes = int
|
|
ESP_FTP_ON 1021 //1 byte = flag
|
|
ESP_AUTO_NOTIFICATION 1022 //1 byte = flag
|
|
ESP_VERBOSE_BOOT 1023 //1 byte = flag
|
|
ESP_WEBDAV_ON 1024 //1 byte = flag
|
|
ESP_WEBDAV_PORT 1025 //4 bytes = int
|
|
ESP_STA_DNS_VALUE 1029 //4 bytes= int
|
|
ESP_SECURE_SERIAL 1033 //1 byte = flag
|
|
|
|
* Get/Set Check update at boot state which can be ON, OFF
|
|
[ESP402]<state> json=<no> pwd=<admin password>
|
|
|
|
*Get available AP list (limited to 30)
|
|
output is JSON or plain text according parameter
|
|
[ESP410]json=<no> <pwd=admin/user>
|
|
|
|
*Get current settings of ESP3D
|
|
output is plain text
|
|
[ESP420]json=<no> <pwd=admin/user>
|
|
|
|
* Set ESP State
|
|
cmd are RESTART / RESET
|
|
[ESP444]<cmd> json=<no> <pwd=admin>
|
|
|
|
* Change admin password
|
|
[ESP550]<password> json=<no> pwd=<admin password>
|
|
|
|
* Change user password
|
|
[ESP555]<password> json=<no> pwd=<admin/user password>
|
|
|
|
* Send Notification
|
|
[ESP600]msg json=<no> pwd=<admin/user password>
|
|
|
|
* Set/Get Notification settings
|
|
[ESP610]type=<NONE/PUSHOVER/EMAIL/LINE/IFTTT> T1=<token1> T2=<token2> TS=<Settings> json=<no> [pwd=<admin password>]
|
|
Get will give type and settings only, not the protected T1/T2
|
|
|
|
* Send Notification using URL
|
|
[ESP620]URL=<encoded url> json=<no>[pwd=<admin/user password>]
|
|
|
|
* Read FS file
|
|
[ESP700]<filename> json=<no>[pwd=<admin/user password>]
|
|
|
|
* Query and Control ESP700 stream
|
|
[ESP701]action=<PAUSE/RESUME/ABORT> json=<no>[pwd=<admin/user password>]
|
|
|
|
* Format ESP Filesystem
|
|
[ESP710]FORMATFS json=<no> pwd=<admin password>
|
|
|
|
* Format SD Filesystem
|
|
[ESP715]FORMATSD json=<no> pwd=<admin password>
|
|
|
|
* List ESP Filesystem
|
|
[ESP720]<Root> json=<no> pwd=<admin password>
|
|
|
|
* Action on ESP Filesystem
|
|
rmdir / remove / mkdir / exists / create
|
|
[ESP730]<Action>=<path> json=<no> pwd=<admin password>
|
|
|
|
* List SD Filesystem
|
|
[ESP740]<Root> json=<no> pwd=<admin password>
|
|
|
|
* Action on SD Filesystem
|
|
rmdir / remove / mkdir / exists / create
|
|
[ESP750]<Action>=<path> json=<no> pwd=<admin password>
|
|
|
|
* List Global Filesystem
|
|
[ESP780]<Root> json=<no> pwd=<admin password>
|
|
|
|
* Action on Global Filesystem
|
|
rmdir / remove / mkdir / exists /create
|
|
[ESP790]<Action>=<path> json=<no> pwd=<admin password>
|
|
|
|
* FW Informations
|
|
[ESP800]json=<no> pwd=<admin password>
|
|
|
|
* Get state / Set Enable / Disable Serial Communication
|
|
[ESP900]<ENABLE/DISABLE> json=<no> [pwd=<admin/user password>]
|
|
|
|
* Get state / Set Enable / Disable buzzer
|
|
[ESP910]<ENABLE/DISABLE> json=<no> [pwd=<admin/user password>]
|
|
|
|
*Get state / Set state of output message clients
|
|
[ESP920]<SERIAL / SCREEN / REMOTE_SCREEN/ WEBSOCKET / TELNET /BT / ALL>=<ON/OFF> json=<no> [pwd=<admin/user password>]
|