{
    "lang": "English",
    "S1": "Connection error",
    "S2": "Connecting",
    "S3": "Looks like you are connected from another place, so this page is now disconnected",
    "S4": "Parsing response error, format is incorrect",
    "S5": "Cannot connect with board",
    "S6": "WebSocket connection error",
    "S7": "Parsing preferences error, file is incorrect",
    "S8": "Retry",
    "S9": "Disconnected",
    "S10": "Connection with board is lost",
    "S11": "Connect again",
    "S12": "About %s",
    "S13": "Dashboard",
    "S14": "Settings",
    "S15": "Donation for ESP3D",
    "S16": "Firmware",
    "S17": "Interface",
    "S18": "Browser version",
    "S19": "Unknown",
    "S20": "Go to github",
    "S21": "Parsing data error, data are incorrect",
    "S22": "Error",
    "S23": "Refresh information",
    "S24": "Close",
    "S25": "Update",
    "S26": "Please Confirm",
    "S27": "Yes",
    "S28": "Cancel",
    "S29": "No",
    "S30": "Do you want to update ?",
    "S31": "Do you want to upload ?",
    "S32": "Uploading...",
    "S33": "File transfert failed",
    "S34": "Update done",
    "S35": "Restarting...",
    "S36": "Features",
    "S37": "Delete",
    "polling": "Polling",
    "S38": "Move Up",
    "S39": "Move Down",
    "S40": "Scan available networks",
    "S41": "enter value",
    "S42": "Incorrect value",
    "S43": "Set",
    "S44": "Save data failed!",
    "S45": "List of available networks",
    "S47": "Select network",
    "S48": "Join",
    "S49": "Protected",
    "S50": "Refresh",
    "S51": "Select this network",
    "S52": "Export",
    "S53": "Export to file",
    "S54": "Import",
    "S55": "Import from file",
    "S56": "Problem with import file",
    "S57": "Importing...",
    "S58": "Restart Board",
    "S59": "This will restart the board",
    "S60": "Please wait...",
    "S61": "Save",
    "S62": "Save and apply changes",
    "S63": "Show",
    "S64": "Auto load data",
    "S65": "Files",
    "S66": "Jog",
    "S67": "Language pack",
    "S68": "Language",
    "S69": "not used",
    "S70": "Label",
    "S71": "Value",
    "S72": "Help",
    "S73": "General",
    "S74": "Play file",
    "S75": "Terminal",
    "terminal": "Terminal Panel",
    "S76": "Verbose mode",
    "S77": "Autoscroll",
    "S78": "Clear",
    "S79": "Clear terminal",
    "S80": "Enter command",
    "S81": "Send",
    "S82": "Send command",
    "S83": "There is an error, fix problem first",
    "S84": "Creation failed %s",
    "S85": "Deletion failed %s",
    "S86": "Close panel",
    "S87": "Download file?",
    "S88": "Upload",
    "S89": "Upload file",
    "S90": "Create directory",
    "S91": "Saving...",
    "S92": "Terminal panel",
    "S93": "Visible when starting",
    "S94": "Edit",
    "S95": "Minimize",
    "jog": "Jog panel",
    "files": "Files panel",
    "S96": "Extensions",
    "S97": "use ; to separate",
    "S98": "Total",
    "S99": "Used",
    "S100": "Delete file",
    "S101": "Delete directory",
    "S102": "Processing...",
    "S103": "Request failed",
    "S104": "Please type directory name",
    "S105": "Type directory name",
    "S106": "Create",
    "S107": "Destination",
    "S108": "Downloading...",
    "S109": "Command error...",
    "S110": "No SD card",
    "S111": "Could not open directory",
    "S112": "Enable polling commands",
    "S113": "Refresh time",
    "S114": "ms",
    "S115": "Commands",
    "S116": "Positions",
    "S117": "Close all panels",
    "S118": "Distance of movement",
    "S119": "sec",
    "S120": "Expand buttons on start",
    "S121": "Extension",
    "macros": "Macros",
    "S122": "Force mobile view",
    "S123": "Informations",
    "S124": "It seems you are in limited environment, please open a browser using http://%s address to get all features working.",
    "S125": "Macro editor",
    "S126": "Ok",
    "S127": "Macro",
    "S128": "Add macro",
    "S129": "Name",
    "S130": "Color",
    "S131": "Text color",
    "S132": "Icon",
    "S133": "Select",
    "S134": "Select icon",
    "S135": "Type",
    "S136": "Output",
    "S137": "Flash",
    "S138": "SD Card",
    "S139": "URL address",
    "S140": "GCODE command",
    "S141": "File name",
    "S142": "Command",
    "S143": "SD",
    "S144": "SD",
    "S145": "Authentication Required",
    "S146": "User Name",
    "S147": "Password",
    "S148": "Log In",
    "S149": "You are now disconnected",
    "S150": "WebUI version",
    "S151": "Disconnect",
    "S152": "Do you want to disconnect?",
    "S153": "Your session will end soon, do you want to stay connected ?",
    "S154": "Stay connected",
    "S155": "Extra pages",
    "extracontents": "Extra content",
    "S156": "Add content",
    "S157": "Panel",
    "S158": "Page",
    "S159": "Action",
    "S160": "Image",
    "S161": "Content",
    "S162": "Camera",
    "S163": "Next",
    "S164": "Previous",
    "S165": "Setup",
    "S166": "Display setup next time?",
    "S167": "Show it",
    "S168": "Hide it",
    "S169": "free to use",
    "S170": "Sound notifications",
    "S171": "Update WebUI",
    "S172": "Update Firmware",
    "S173": "Session timeout",
    "S174": "Changes applied, now need to restart the board.",
    "S175": "Operation canceled by user",
    "S176": "Haptic feedback",
    "S177": "List of language packs",
    "S178": "Select",
    "S179": "Select this language pack",
    "S180": "Select this theme pack",
    "S181": "Theme",
    "S182": "List of available themes",
    "S183": "Theme pack",
    "S184": "Hold Stream",
    "S185": "Show Stream",
    "S186": "Save image",
    "S187": "Panels list",
    "S188": "TFT SD",
    "S189": "TFT USB",
    "S190": "SD",
    "S191": "Extra SD",
    "S192": "Directories are not allowed",
    "S193": "Multiple files are not allowed",
    "S194": "WebUI and Firmware version are not compatible",
    "S195": "Error saving data",
    "S196": "Show informations page",
    "S197": "Show machine settings tab",
    "S198": "Select from list",
    "S199": "Not yet supported",
    "S200": "Audio feedback",
    "S201": "Invalid user name or password",
    "S202": "Panels order",
    "S203": "Fixed panels order",
    "S204": "Stream commands",
    "S205": "Abort",
    "S206": "Clear stream error",
    "S207": "Add command(s)",
    "S208": "Precision: $",
    "panels": "Panels",
    "processing": "Processing",
    "no stream": "No stream",
    "pause": "Stream on hold",
    "resume stream": "Resume stream",
    "sta fallback mode": "Client fallback mode",
    "radio_boot": "Radio at boot",
    "general": "General",
    "chip id": "Chip ID",
    "CPU Freq": "CPU Frequency",
    "CPU Temp": "CPU Temperature",
    "free mem": "Free memory",
    "SDK": "SDK",
    "flash size": "Flash Size",
    "size for update": "Available Size for update",
    "FS type": "Filesystem type",
    "FS usage": "Filesystem usage",
    "sleep mode": "Sleep mode",
    "wifi": "WiFi",
    "HTTP port": "HTTP port",
    "Telnet port": "Telnet port",
    "Ftp ports": "Ftp ports",
    "Telnet Client": "Telnet Client",
    "Ftp Client": "Ftp Client",
    "Websocket port": "Websocket port",
    "WebDav port": "WebDav port",
    "WebDav Client": "WebDav Client",
    "camera name": "Camera name",
    "camera ports": "Camera ports",
    "BT Status": "Status",
    "connected": "Connected",
    "disconnected": "Disconnected",
    "cable": "Cable",
    "ON": "Enabled",
    "OFF": "Disabled",
    "DNS": "DNS",
    "mac": "Mac address",
    "signal": "Signal",
    "phy mode": "Phy Mode",
    "visible": "Visible",
    "authentication": "Authentication",
    "DHCP Server": "DHCP Server",
    "clients": "Clients",
    "direct": "Direct",
    "shared": "Shared",
    "debug": "Debug",
    "FW arch": "FW architecture",
    "FW ver": "FW version",
    "system": "System",
    "sta": "Client mode",
    "ap": "Access point mode",
    "mixed": "Mixed mode",
    "service": "Services",
    "http": "HTTP protocol",
    "telnetp": "Telnet protocol",
    "websocketp": "WebSocket protocol",
    "webdavp": "WebDav protocol",
    "telnet": "Telnet",
    "ftp": "FTP protocol",
    "notification": "Notifications",
    "network": "Network",
    "yes": "Yes",
    "no": "No",
    "hostname": "Hostname",
    "radio mode": "Radio mode",
    "bt": "Bluetooth",
    "ethernet": "Ethernet",
    "eth-sta": "Ethernet",
    "SSID": "SSID",
    "ip mode": "IP Mode",
    "none": "None",
    "dhcp": "DHCP",
    "static": "Static",
    "ip": "IP",
    "gw": "Gateway",
    "msk": "Mask",
    "pwd": "Password",
    "channel": "Channel",
    "security": "Security",
    "adm pwd": "Admin password",
    "user pwd": "User Password",
    "enable": "Enable",
    "port": "Port",
    "control port": "Control port",
    "active port": "Active port",
    "passive port": "Passive port",
    "time": "Time",
    "i-time": "Internet time",
    "tzone": "Time zone",
    "dst": "DST",
    "t-server": "Time server",
    "auto notif": "Auto notification",
    "pushover": "Pushover",
    "email": "Email",
    "line": "Line",
    "telegram": "Telegram",
    "t1": "Token 1",
    "t2": "Token 2",
    "ts": "Setting",
    "device": "Connected device",
    "camera": "Camera",
    "buzzer": "Buzzer",
    "sensor": "Sensor",
    "type": "Type",
    "sd": "SD card",
    "speedx": "Speed factor",
    "targetfw": "Target firmware",
    "repetier": "Repetier",
    "marlin": "Marlin",
    "smoothieware": "Smoothieware",
    "unknown": "Unknown",
    "baud": "Baud rate",
    "verbose": "Verbose",
    "bootdelay": "Delay (ms)",
    "boot": "Boot sequence",
    "session timeout": "Inactivity timeout (min)",
    "outputmsg": "Output message",
    "M117": "Machine screen",
    "screen": "Screen",
    "ws": "Websocket",
    "serial": "Serial",
    "intervalms": "Interval (millisec)",
    "modem": "Modem",
    "light": "Light",
    "grbl": "Grbl",
    "SD updater": "SD updater",
    "setup": "Setup mode",
    "serial_bridge": "Serial Bridge",
    "timeout": "Timeout, did not get response in time",
    "P1": "override config",
    "P2": "Reset board",
    "P3": "Save current settings ?",
    "P4": "Reset board to apply changes?",
    "P5": "Sorry this UI is only for 3D printer, please use CNC one",
    "P6": "Home all axis",
    "P7": "Home X axis",
    "P8": "Home Y axis",
    "P9": "Home Z axis",
    "P10": "XY feed rate",
    "P11": "Z feed rate",
    "P12": "Speed",
    "P13": "Motors Off",
    "P14": "mm/min",
    "P15": "Quick Stop",
    "P16": "mm",
    "P17": "Cannot get valid data",
    "P18": "Move to position",
    "P19": "Reset",
    "P20": "Move to: ",
    "P27": "Operation successful",
    "P28": "Operation failed",
    "P29": "Temperatures",
    "P30": "Flow rate",
    "P31": "Fan",
    "P32": "Extrusion",
    "temperatures": "Temperatures panel",
    "P34": "Maximum ",
    "P35": "Preheat",
    "P36": "Extruders",
    "extruders": "Extruders Panel",
    "P37": "Bed $",
    "P38": "Stop heating",
    "P39": "Stop",
    "P40": "Stop all",
    "P41": "Extruder $",
    "P42": "Probe",
    "P43": "Chamber",
    "P44": "Redundant",
    "P45": "Show Fans",
    "P46": "Show Speed",
    "P47": "Show Flow rate",
    "P48": "Value maximum",
    "P49": "Mixed extruders",
    "P50": "Extruder feed rate",
    "P51": "Colors",
    "P52": "Number of colors",
    "P53": "Extrude",
    "P54": "Reverse",
    "P55": "Distance of extrusion",
    "P56": "Charts",
    "charts": "Charts Panel",
    "P57": "Control mode",
    "P58": "Clear chart",
    "P59": "Timestamp",
    "P60": "Date Time",
    "P63": "Printing",
    "P64": "Not printing",
    "P65": "Move X to",
    "P66": "Move Y to",
    "P67": "Printer status",
    "P68": "",
    "P69": "",
    "P70": "",
    "P71": "t",
    "P72": "℃",
    "P73": "Home axis",
    "P74": "($) is axis",
    "P75": "Move Z to",
    "P76": "Jog up",
    "P77": "Jog down",
    "P78": "Jogging distance",
    "P79": "Use keyboard",
    "P80": "[Arrow Right] X+, [Arrow Left] X-, [Arrow Up] Y+, [Arrow Down] Y-, [PageUp] Z+, [PageDown] Z-, [X] Home X, [Y] Home Y, [Z] Home Z, [Home] Home All, [M] Motor Off, [P] Move XY, [End] Move Z, [Delete] E-Stop, [1] Fr 100, [2] Fr 10, [3] Fr 1, [4] Fr 0.1",
    "P81": "Keyboard keys",
    "P82": "Show Extruders",
    "P83": "Show Bed",
    "P84": "Show Chamber",
    "P85": "Show Probe",
    "P86": "Show Redundant",
    "P87": "Show Board",
    "P88": "Show Sensors",
    "P89": "Waiting for temperatures list available from printer",
    "P90": "Board",
    "P91": "Fan $",
    "P92": "Flow $",
    "P93": "Speed $",
    "P94": "$ is value, # is targeted index",
    "P95": "SD List command",
    "P96": "Extra Controls",
    "P97": "Print status",
    "P98": "Pause command",
    "P99": "Resume command",
    "P100": "Stop command",
    "P101": "SD play commands",
    "P102": "TFT SD play commands",
    "P103": "TFT USB play commands",
    "P104": "Preset values",
    "P105": "Elapsed",
    "P106": "Command",
    "P107": "Set %",
    "P108": "days",
    "P109": "hours",
    "P110": "mins",
    "P111": "secs",
    "P112": "Left",
    "heating": "Heating",
    "controls": "Extra Controls panel",
    "status": "Status panel",
    "E1": "Please use 8.3 filename only.",
    "SM1": "Override",
    "SM2": "Configuration file name",
    "SM3": "Reset Board",
    "SM4": "Extra SD is Shared",
    "SM5": "SD is Shared"
}